KUINIU MACHINERY

A tilting bucket used on a small excavator. Suitable for use on 1-.3.5 ton small excavators. There is an oil cylinder on the bucket, which can control the left and right swing of the bucket to a certain angle, so as to realize the working condition of the bucket. Bucket capcity：0.0.3-0.1m³ Angle of inclination：150° Control mode：Hydraulic

The excavator snow plow is a snow plow that is installed on the excavator for snow and ice removal without the use of salt or snow melting agent. , and one-time effective, does not damage the marking line, does not damage the road surface, and has high snow removal efficiency. Width：800mm Weight：50kg Applicable Industries： Farms, Home Use

The edge of the grab is made of wear-resistant high-strength plates to ensure a long service life, with a wide pivot distance, and a large grab volume; when the grab is closed, it has a very flat convex curve, so that it can be used from the cabin, train, car, etc. When unloading, it can be guaranteed to avoid damage to the deck and deck surface. Compared with ordinary hydraulic grabs, the lifespan can be increased by more than 50%. Width：600mm(Optional 500-1200mm) Bucket capacity：0.15m³ Adapted model：≤ 3T excavators Maximum opening：100° Optional 360° rotation

Quick hitch is also called quick coupler, mainly to improve the replacement efficiency between bucket and bucket, ripper and other working parts when the excavator is working. It is divided into two types: hydraulic type and mechanical type, although the design is very flexible. And subjective things, but the basic principles are the same. Pin shaft: φ25mm Open gear: 92mm Axle spacing: 85mm

The ripper is a replaceable working device with breaking and loosening functions. It is divided into a ripper for excavators and a ripper for bulldozers. The ripper for excavators is also called bucket hook, and the ripper for bulldozers is also called tail hook. It is generally single-tooth, but also has two or three teeth. It has strong cutting force and can be widely used. For engineering construction, mining, road renovation, etc. Length：344.1mm Pin diameter：Φ25mm Wheelbase：85mm

It is mainly used for stubble removal before ploughing, returning chopped straw to the field, breaking the surface compaction, and leveling the broken soil after ploughing to maintain moisture. Better, the overall structure is reasonable and sturdy. Width：500mm (Customizable) Number of teeth：5 (Customizable) Material：Q345 Wear-resistant steel

Mainly used in abutment backs, chicken feet ditch, slope protection and other occasions where personnel and road rollers are not suitable for construction, foundation treatment of underlying buildings, reinforcement and compaction of river embankments, reservoirs, river embankments, seawalls and flood relief and other ports, water conservancy Applications. Weight：65kg Control： Hydraulic Flow：4ml/r Vibration Frequency：＞800

Pallet Forks can be transformed into a small forklift, which can easily pick up, move, and transport goods and other items, and realize multi-purpose, flexible and efficient. Maximum Load：260kg Length：1373mm Width：576mm Pin diameter：Φ25mm

Milling machine, also known as the milling and excavating head, is an auxiliary tool for the excavation and trimming of mines, tunnels, diversion culverts, subways, etc. , breaker, hydraulic shear and other general equipment, used in tunnel excavation and contour correction, low disturbance to the stratum during the excavation process, small noise, high excavation safety, especially suitable for blasting construction areas. Maximum Output Torque：1500NM Maximum Working Pressure：21Mpa Maximum Flow：20L/min Motor Form：Piston Motor Suitable for Excavators：0.8T——50T

The auger is a kind of helical blade drilling machine, including a drilling machine frame, a slideway on the frame, and a reduction box that can slide up and down along the slideway. The reduction box is connected to the power input shaft and the power output shaft. The other end is connected to a hydraulic motor, the other end of the power take-off shaft is connected to a drill pipe, and the lower end of the drill pipe is connected to a drill bit, which can be widely used in orchard planting, municipal engineering, etc. Drilling depth：700mm (Customizable) Maximum torque：750N·M (Customizable) Drilling diameter：Φ200mm (Customizable) Material：Q345 Wear-resistant steel

Hydraulic Hammer have become an important tool for hydraulic excavators, and some people have installed hydraulic Hammer on backhoe loaders (also known as two-headed) or wheel loaders for crushing operations. Hydraulic Hammer, also known as hydraulic Hammer or hydraulic breaker., which can be widely used in engineering construction, mining, road breaking, etc. Total Weight：60kg Rate：500-1200bpm Chisel Diameter：35mm Suitable Weight：0.6-1.5T Working Pressure：80-110kg/cm²

The 360° rotating bucket includes a bucket body, a rotary drive device, a transition frame and a pin shaft. One end of the rotary drive device is connected to the bucket body, and the other end of the rotary drive device is connected to the transition frame, which is symmetrical on the transition frame. There are two pins provided. The rotary drive device of the device adopts the rotary drive mode of cycloid motor and turbo screw deceleration to realize 360-degree rotation of the bucket, which will enable loading and unloading of mine trucks and upper belt unloading in a narrow space, and will be used for coal mine roadway repair operations, ramps Repair operations, etc., bring great convenience and efficiency. Bucket capacity：0.03-0.1m³ Rotation：360° Control method：Hydraulic Turn around：two-way

The complete set of hydraulic systems are international well-known brands, no rust, no valve jamming, etc. regardless of wind, sun, rain, etc. At the same time, the products can be customized to meet the needs of different countries and customers. It can be applied to a variety of complex environment operations, whether it is mountains, hills, terraced fields, hard ground, paddy fields, it can be easily done. Engine：KubotaD1105 EURO V Weight：1800kg Engine Power：18.2kw/25hp Total Size(L*W*H)：3550x1400x2203mm Digging depth：2350mm

The complete set of hydraulic systems are international well-known brands, no rust, no valve jamming, etc. regardless of wind, sun, rain, etc. At the same time, the products can be customized to meet the needs of different countries and customers. It can be applied to a variety of complex environment operations, whether it is mountains, hills, terraced fields, hard ground, paddy fields, it can be easily done. Engine：KubotaD1105 EURO V Power：18.2kw Weight：2100kg Total Size(L*W*H)：2500x1400x2200mm Digging depth：2200mm

The complete set of hydraulic systems are international well-known brands, no rust, no valve jamming, etc. regardless of wind, sun, rain, etc. At the same time, the products can be customized to meet the needs of different countries and customers. It can be applied to a variety of complex environment operations, whether it is mountains, hills, terraced fields, hard ground, paddy fields, it can be easily done. Engine：KubotaD722 EURO V Power：10.2KW Weight：1500kg Total Size(L*W*H)：2400*1100*2200mm Digging depth：1850mm

The complete set of hydraulic systems are international well-known brands, no rust, no valve jamming, etc. regardless of wind, sun, rain, etc. At the same time, the products can be customized to meet the needs of different countries and customers. It can be applied to a variety of complex environment operations, whether it is mountains, hills, terraced fields, hard ground, paddy fields, it can be easily done. Engine：KubotaD722 EURO V Power：10.2KW/13.5hp Weight：1100kg Total Size(L*W*H)：2400*1100*2200mm Digging depth：2350mm

The complete set of hydraulic systems are international well-known brands, no rust, no valve jamming, etc. regardless of wind, sun, rain, etc. At the same time, the products can be customized to meet the needs of different countries and customers. It can be applied to a variety of complex environment operations, whether it is mountains, hills, terraced fields, hard ground, paddy fields, it can be easily done. Engine：KOOP EURO V OR BRIGGS&STRATTON EPA Power：7kw/13.5hp Weight：1000kg Total Size(L*W*H)：2200*1100*2230mm Digging depth：1735mm