Car electronic wire harness loop inspection equipment used by wiring harness manufacturers that produce circuit boards can detect open circuit, short circuit and wrong circuit of automobile wiring harness. We usually call it a harness loop inspection station. Manually compare the drawings and use a homemade tool, which we call a guide (one end is positive and the other is negative). If there is any open or wrong way at two or more points (welding line) of the automobile wiring harness at the designated sheath hole position, the open or wrong way of the automobile wiring harness can be judged. After the automobile wiring harness is crimped, use a dynamometer to check whether it is tight or not. The relevant standards are as follows: Crimping is done with special tools, and the method of operation is very important. The socket must be pressed in place. Generally, the appearance of defective parts can be seen. For example: the line pressure is misaligned. The socket is not stuck on the socket. Just test the electricity without measuring the tension. #connectors #wireharness #connectors #cableassemblies #atv #electricmobility #harnesses #hsd https://www.instagram.com/p/CIFHTKKhGHr/?igshid=fqenzkwovvmq
