Untitled

Majority of the iPhone users think that GPS is among the most important features that people use on an iPhone. Understandably every user gets annoyed when it doesn’t work properly. Issues related to GPS can be that you might face issues like GPS shall not be able to search for your present location. For troubleshooting this issue, you need to go through the below-mentioned steps carefully.

Fixing iPhone GPS problem

Firstly, enable the phone data.

Then, ensure that your iPhone has a network.

Note: As Wi-Fi confirms stability, so prefer to enable it and connect that too.

Next, you need to close the GPS application, whichever you are using.

You need to restart the Maps application.

Then, you need to turn off the phone.

Next, restart the iPhone.

Remember! With the above-stated procedure, none of your files shall be lost.

For iPhone X and 11-Series users-

Firstly, do a long press on the Volume Up option.

Then, do a long press on the Volume Down option.

After that, continue pressing the on/off switch till the time you get the Apple symbol.

Next, push the toggle of the phone off for turning it off.

Then, switch on your iPhone.

For iPhone 6,7 and 8 users-

Firstly, do a long press on the on/off switch simultaneously with the Home/Wake option. It will be located at the end of your iPhone.

Note: You need to continue to press it till the time your iPhone is turned off.

Whenever you get the Apple symbol, you require to wait for the switches to go.

Next, let your iPhone get rebooted.

As soon as the iPhone has got reset, you un-locked it, check the GPS one more time.

4. You need to enable the Airplane mode for half a minute. And check the GPS after that.

You require to delete the GPS application and again install it. But only if you are not able to close GPS on your iPhone.

See if the GPS application that you are using does have the right permission.

For doing it, have a look at the below-mentioned steps.

Firstly, tap on Settings.

Then, press on Privacy.

After that, click on Location Services.

Next, select the right settings for allowing the locations services for the application.

Important: Apple states that the ‘Location services’ uses GPS, Bluetooth, crowd-sourced Wi-Fi hotspots as well as cellular towers for tracing the location on iPhone.

7. Disable LTE services.

Firstly, visit the Settings.

Then, tap on Cellular.

After that, click on Cellular Data Options.

Next, click on Voice and Data.

Lastly, choose 3G.

8.Reset the iPhone

If none of the above steps work out, then you can do a factory set to your phone. The most import thing to remember over here is that all your data shall be removed after doing a factory reset. So you should take this step at last only generally.

I’m Justin Hinkle and I have always loved Ohio. It has been a source of joy and comfort to me for many years. I am currently working for McAfee.com/Activate at Newyork but still think of Ohio.

How to Fix Sonos Speakers not working with Amazon Alexa?Amazon Alexa is among the handiest devices available on the market currently. What makes it even handier is its versatile compatibility. The device can be connected to numerous devices and Sonos speakers are one of them. If your Sonos speakers are not working with Amazon Alexa, then read through the blog to fix it.

Alexa Saying ‘I have no Sonos Speakers’

If you would like to fix when Alexa says ‘I have no Sonos speakers,’ then abide by the given steps.

Open the Sonos application on the iPhone.

Then go to the Settings option.

Select the System option.

Thereafter, choose ‘About My System’ beneath System Settings field.

Check the Running Version

If you wish to check the running version, then pursue the given instructions.

Unlock the Sonos application on the iPhone.

You should select the Settings button.

Go to the System tab.

You have to choose ‘System Updates.’

Switch the toggle of Update Automatically.

Now, you should move down and select the ‘Check for Updates.’

Check the Rooms and Speaker Names

If you would like to check the rooms and speaker names, then abide by the given steps.

Unlock the Alexa application on the iPhone.

You should select the menu button on the top left-hand side of the screen.

Go to the Skill and Games.

Then choose Your Skills.

You have to choose Sonos within the skills list.

Navigate to the Settings.

Then choose ‘Manage Smart Home Devices.’

You should select the ‘All Devices’ to check all of the connected devices.

Thereafter, choose the trusted product in the Sonos speaker.

Select the device to check when it is, actually, a Sonos speaker.

Reset the Voice Services on Sonos

If you wish to reset the voice services on Sonos, then pursue the given instructions.

Open the Sonos application on the iPhone.

Then select the Settings button.

You have to choose the Services option.

Beneath the Voice option, select the Amazon Alexa.

You should choose the name of the Sonos One device.

Thereafter, select the Remove Alexa option.

Finally, you can get a return into the Services window and link it to Alexa again.

Check the Alexa Skill on Sonos Speakers

If you would like to check the Alexa skill on Sonos speakers, then abide by the given steps.

Reach the Alexa application and open it on the iPhone.

You should select the menu button on the top left-hand side of the screen.

Go to the Skill and Games.

Choose Your Skills.

You have to choose Sonos within the skill list.

Navigate to the Settings.

Go to ‘Manage Smart Home Devices.’

Select the Add icon on the top right-hand side of the screen.

You should choose Add Device.

Then go to the Speakers.

Navigate to the Sonos.

Select Discover Devices.

When Alexa does not locate the speakers, back to the menu of Sonos skill by selecting Close and choose the Back tab twice.

Now, select the Disable Skill option to unlink the account.

Choose Spotify as Default App

If you wish to choose Spotify as a default app, then pursue the given instructions.

Unlock the Alexa application on the iPhone.

Select the menu button in the top left-hand side of the screen.

Go to the Settings.

Move down to the ‘Alexa Preferences’ section and select ‘Music and Podcasts.’

Go to the Default Services beneath the Settings at the upper side of the screen.

Now, modify the Default music library within the Amazon Music to Spotify.

Justin Hinkle is a creative person who has been writing blogs and articles about cyber security. He writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users. His articles have been published in many popular e-magazines, blogs and websites.

How to Locate the Router’s IP Address on Windows?Most of us are familiar with the fact that all the Wi-Fi router acquire a distinct and unique IP address. This sounds secretive that several users think that it is a term for high-level technicians, but in this blog, we are mainly focusing on this topic. Read this blog carefully and successfully attain the information to locate your router’s IP address from any device. So, here are the steps to locate the router’s IP address on Windows.

Through Command Prompt

If you would like to locate the router’s IP address through Command Prompt, then abide by the given steps.

Hold the Win + R keys at once on your keyboard to open a Run dialog box.

Then enter ‘cmd’ into it and then hit the Enter key to launch a new instance of the Command Prompt.

Go to the Command Prompt and enter ‘ipconfig’ and hit the Enter key.

If the Command been prosecuted, the Command Prompt will get back to the network’s setups. The IP address of the router will be listed from these setups as the Default Gateway.

Through Control Panel

If you wish to locate the router’s IP address through Control Panel, then pursue the given instructions.

Go to the Start Menu and launch it.

You have to browse for a control panel.

Navigate to the search results which the back to you, select the Control Panel.

You should select the ‘View network status and tasks’ beneath Network and Internet field from the Control Panel.

Beneath ‘View your active networks’ field in the resulting screen, select the network name you are linked to near to Connections.

Go to the Status screen that prompts, select the Details.

Now, you should view a ‘Network Connection Details’ screen on display. On this screen, find the IPv4 Default Gateway to create a note of the Value for this asset, which is listed near to it- that is the private IP address for the Wi-Fi router and the network’s Default Gateway.

Locate the IP Address of Router on Linux

If you would like to locate the IP address of the router on Linux, then abide by the given steps.

Most of the Linux-based OS has a Network button within the Notification Area situated at the upper side of the display. Select the Network button.

Go to context menu, which comes, select the Connection Information.

The Wi-Fi IP address of the router will be listed as the Gateway, Default Route, or Default Route Address inside the dialog of the Connection Information that prompts.

Locate the IP Address of Router on OS X

If you wish to locate the IP address of router OS X, then pursue the given instructions.

Go to Apple menu inside the toolbar at the upper side of Mac’s window.

Navigate to the context menu, which comes, select the System Preferences.

On the screen of System Preferences, that prompt, find and select the Network button.

On the left-hand side panel of the screen of Network that comes, select the network you are recently linked to and wish to locate the Default Gateway for. The network is a wired network or wireless network that modifies nothing.

Go to the right-hand side panel of the screen, select the Advanced option.

Move to TCP/IP button of the screen that comes.

OS X passes on to the Wi-Fi private IP address of the router easily as Router, and you will view the listed IP address as the Router inside the TCP/IP button on the screen.

Locate the IP Address of Router on Chrome OS

If you would like to locate the IP address of the router on Chrome OS, then abide by the given steps.

Go to Notification Area situated to the right-hand side of the Taskbar.

On context menu which comes, select the option labeled Connected to Network

On the list which comes on the screen, select the network name you are linked to and wait to locate the Default Gateway for.

Now, you should view all applicable detail for the chosen network. Select the Network button.

Finally, choose the Network button, you will view the IP address of the router listed as the Gateway.

Locate the IP Address of Router on Android

If you wish to locate the IP address of the router on Android, then pursue the given instructions.

Go to the Wi-Fi Analyzer and open it.

Select the View menu.

You should choose AP List within the options given to you.

Now, you should view a Connected to (Name of Network) title with a check near to it at the upper side of the screen. Select the header.

Finally, you willsee a small dialog, including all the recoverable detail relating to the Wi-Fi network you are linked to, will prompt. The IP address of the router will be listed from the dialog as the Gateway.

Locate the IP Address of Router on iOS

If you would like to locate the IP address of the router on iOS, then abide by the given steps.

Navigate to the Home screen, find and select the Settings.

You should select the Wi-Fi option.

Select the router name you are recently linked to and wish to find the IP address for.

Finally, you should view a list including all recoverable detail for the network.

Now, the Wi-Fi IP address of the router will be listed as the Router from the list.

I’m Justin Hinkle and I have always loved Ohio. It has been a source of joy and comfort to me for many years. I am currently working for Office.com/Setup at Newyork but still think of Ohio.

How to Use Internet Explorer Mode in Microsoft EdgeMicrosoft Edge browser has the in-built support for Internet Explorer but users have to enable it beforehand. If you want to allow it, then this post might be helpful for you. Go through the blog and follow the instructions to use the internet explorer mode in the Microsoft Edge.

Start the Experimental Edge Flag

If you wish to start the Experimental Edge flag, then pursue the given instructions:

Go to Edge Chromium browser, type the following address then press Enter:

edge://flags/#edge-internet-explorer-integration

Choose IE mode to start the IE integration setting.

Make the shortcut of Edge on desktop, right-click on it.

Click on properties then input the given parameter to target:

–ie-mode-test

Tap on Apply.

Then the OK option.

Start the edge again.

Start the Internet Explorer in Microsoft Edge via Group Policy

Many companies around the world use Internet Explorer as it permits the loading of interior websites without using a separate browser. If you want to enable Internet Explorer in Edge, then you can follow the provided steps:

Start the Group Policy setting

Organize that which websites should be launch

Confirm if the site is loading on Internet Explorer form

Before moving further, it is necessary to reveal which Internet Explorer performs in Edge supports including:

All the files modes as well as enterprise.

Controls the ActiveX

Browsing the Helper Objects

Internet Explorer settings and Group Policies which is influencing security zone settings as well as Protected Mode

IEChooser

Microsoft Edge extensions

           Start the Group Policy Setting

If you want to start the Group Policy setting, then abide by the given steps:

Open Microsoft file page, then download as well as use the new Microsoft Edge Template.

Launch Local Group Editor. As the GPEDIT launches.

Go to the following settings:

Open computer configuration.

Click on Administrative Templates.

Select Microsoft Edge.

Turn to the right window of the editor and locate Configure Internet Explorer integration option.

Tap twice the settings.

Choose enabled.

When you have checked the option, Open Options menu, then press the drop-down arrow.

Click on Internet explorer mode then hit OK.

This will confirm and save the settings of the policy.

Organize That Which Websites Should Be Launch in Internet Explorer

There are two choices to classify which sites to use to launch in Internet Explorer menu:

Configure sites on Enterprise Site.

Configure every Intranet site.

I’m Justin Hinkle and I have always loved Ohio. It has been a source of joy and comfort to me for many years. I am currently working for Office.com/Setup at Newyork but still think of Ohio.

How to Use Assistive Touch on iPad and iPhoneAssistive Touch is the feature of the iPhone that helps users with skills impairments. Enabling the Assistive Touch option allows the user to execute actions like the pinching to 3D Touch or zoom with just one click. It helps to access any action quickly with one touch. If you want to enable it, then you are on the right post. Go through the blog and follow the instructions to use the Assistive Touch on iPad and iPhone.

How to Enable the Assistive Touch

If you want to enable the Assistive Touch, then you can follow the provided steps:

Go to settings.

Click on Accessibility.

Select Touch.

Choose Assistive Touch to switch it on.

Turn it on.

A square figure with a white circle will display on the screen. This will be the shortcut for the Assistive touch button. Users can click on it to open the Assistive Touch option or drag it on the screen to change the position.

How to Use the Assistive Touch

If you wish to use the Assistive Touch, then pursue the given instructions:

Open the Assistive Touch.

Click the option:

Notification: Shows the Notification section so that the user does not have to swipe down.

Device: It allows the user to perform different functions, including changing the volume, locking the screen, rotating the screen, and much more.

Control center: Shows up the control section so that the user doesn’t have to scroll.

Home: Shows up the Home screen without pressing the Home tab.

Siri: Activate Siri.

Custom: It allows the user to perform and insert gestures like zooming.

How to Insert Custom Gestures in Assistive Touch

If you want to insert custom gestures in Assistive Touch, then abide by the given steps:

Go to Settings.

Open Accessibility.

Click Touch.

Select AssistiveTouch.

Choose the Create New Gesture option.

Click on to make a new gesture. One multi-touch gesture will be combined with a series of clicks.

Click Stop to the bottom right when you have completed the gesture.

Select Play option to preview the gesture

and tap Record to re-record it.

Click on Save option to save it.

Add name in gesture box.

Hit Save.

Click a Custom option on AssistiveTouch.

Select custom gestures.

How to Set up the Menu for Assistive Touch

In case you intend to set up the menu for Assistive Touch, go through the below-mentioned steps:

Go to Settings.

Click Accessibility.

Select Touch.

Choose AssistiveTouch.

Press AssistiveTouch.

Hit the Customize Top Level option.

Add a Button

In case you need to insert a button, then you need to follow the offered steps:

Click plus option at a bottom right to add the button.

Tap on the created button.

Select the action.

Click Done at the top right.

Remove the Existing Button

Follow the provided instructions to remove the existing button:

Click on the minus option at the bottom right to delete the button.

Repeat Step 1 to delete other buttons.

Select Reset to return to the default setting.

The users can’t select which button to remove. Instead, it chooses which is close to the button. If you add the wrong button, then they can insert it again using the same step.

How to Use the Trackpad or Mouse with the Mobile Device

The users can use the Bluetooth enable mouse or trackpad via a mobile device.

How to Utilize the Custom Actions

If you want to use the custom Actions, then abide by the given steps:

Go to Settings.

Click on Accessibility.

Select Touch.

Choose the Assistive Touch.

Double-click or extended Press to set up every action.

Hit the Option which action you want.

Justin Hinkle is a creative person who has been writing blogs and articles about cyber security. He writes about the latest updates regarding McAfee.com/Activate and how it can improve the work experience of users. His articles have been published in many popular e-magazines, blogs and websites.

How to Pair Bluetooth Headphones to Your Android PhonePairing a Bluetooth device with your phone is a relatively simple affair. Remember that before you start the pairing operation, please confirm the following:

Refer to the operating instructions or help guide for model-specific information.

Place the source device within 1 meter or 3 feet of the headphones.

Make sure the headphones and Bluetooth source devices are both sufficiently charged

Helpful Information On Bluetooth Pairing

Once your Bluetooth devices are paired, there is no need to pair them again except in the following cases:

When you perform a factory settings reset, all pairing information is deleted.

Pairing information has been deleted after repair, etc.

If you exceed the maximum number of Bluetooth devices that can be paired – 8. The oldest pairing information will be overwritten and replaced by any new pairing information.

When the pairing information for the handset has been detected from the Bluetooth source device, there is no need to pair it again.

Connecting a Bluetooth device to your Android Smartphone

Tap the wireless headset button on “On” mode. Check it properly whether they are charged and under power-on mode.

Open a gear-shaped icon named as “Settings.”

Then hit on the “Connections’ tab- the foremost option located under the settings tab.

Now click on the “Bluetooth” option. It is available under the connection settings option.

Keep your Bluetooth headset under pairing/connecting mode. If you see that your headset is unable to discover your device, read the user’s manual you got along with your headphone device.

Now hit on the “Scan” button to discover your headset device. It is located at the top-right edge of your Bluetooth settings icon on your smartphone. Tapping on this button will enable the device to discover for any Bluetooth gadgets available nearby. After completing of the scanning process, your wireless headphones will appear under the listings of nearby devices.

Under the settings menu, a list with all the available nearby devices will open on your smartphone. Here the name of your Bluetooth device will appear, tap on it to pair. After a few moments of your tapping, it will get paired with your headset device after authenticating the device’s IP address, model name and number. When your device gets paired, you can use it as you wish through your smartphone.

I’m John Rock and I have always loved Ohio. It has been a source of joy and comfort to me for many years. I am currently working for McAfee.com/Activate at Newyork but still think of Ohio.

How to Organize Your Shortcuts on iPad and iPhonesManaging shortcuts for your favorite apps significantly reduces your efforts. You may create your shortcuts for the desired applications. You have other various options to do so as well. You can drag and drop them into the library from the gallery. It enables you to delete, organize, or even make duplicates of them using the Shortcut app.

The shortcuts can be managed to appear or disappear on the Shortcuts widget. In order to do so, follow the below-mentioned steps.

Rearranging the Shortcuts on Your Device

First of all, tap the “Shortcuts” application. It is usually located on the home screen of your device. You may also locate it under the apps drawer.

Now, hit the “Edit” tab situated at the upper-left edge of your device’s screen.

Here, you will see various shortcut options. You have to press on your desired shortcuts.

Then place them into the new location. You may drag one or more shortcuts that you wish.

After that, hit the “Done” tab when you became agree that all your selected shortcuts placed according to your arrangement.

Removing Shortcuts

Launch the “Shortcuts” app located on your device.

Then hit the “Edit” tab present at the upper-left side edge of your application.

After that, select the desired shortcuts you like to remove. After this, blue-colored checkboxes will show on your selected shortcuts present on the device’s screen.

Now hit the delete icon (trash bin). It will appear blue.

Then tap on the “Delete Shortcut” option.

Duplicating the Shortcuts

Firstly, hit the “Shortcuts” application located on your iPad or iPhone.

Now tap the “Edit” tab situated on the upper-left edge of your application window.

Next, tap on your desired shortcuts of which you wish to make a copy.

Then press the “duplicate” tab.

Checking Shortcuts in Shortcut Widget or Share Sheet

First of all, launch the “Shortcuts” app located on your iPad or iPhone.

Then hit the menu icon located on shortcuts.

Now tap the menu button once more. It will be at the upper-right edge of your shortcut page.

Next, you have to toggle the “Show in Widget” button to “On.”

It will turn green.

It will enable your shortcut to show on your Widget list.

Again you have to toggle the “Show in Share Sheet” button to “On.”

It will show your shortcuts inside the Share Sheet.

After this, the switch button will start to appear green.

Now tap on the “Share Sheet Types” option.

Then, you have to select the share sheet type option you don’t wish your shortcuts to show under.

After that, hit the “Details” option.

Finally, tap on the “Done” button.

I’m Justin Hinkle and I have always loved Ohio. It has been a source of joy and comfort to me for many years. I am currently working for McAfee.com/Activate at Newyork but still think of Ohio.

RingCentral enables users to take their business wherever they go. It is a popular app that offers comprehensive communications and collaboration solutions. It facilitates users to toggle between chats, calls, and video meetings, even when they are on the go. Not only does it help in saving time, but it also leads to an increase in productivity. Users can also install extensions to enhance their RingCentral experience. Read on and learn how to do so.

Adding Extensions in RingCentral

If you want to add extensions in RingCentral, then you can follow the provided steps.

First of all, you have to sign in on the RingCentral dashboard.

After that, you should choose Users and Add Users.

You have to choose between Domestic and International according to your location.

Then you should choose between “Add Users With Phones” or “Add Users Without Phones” according to the requirement.

You should input the number of extensions users you would like to add, the state in that they will be found, their local area code.

After that, choose A Device and select a current purchase phone, desktop phone, or another device.

If you would like to add the extension, choose Add.

You should choose Next to begin the procedure.

After that, you have to input the shipping address on the next screen as well if you are running the application on your device.

You have to checkmark the boxes and then tap on Create Shipping Group.

You should move down and choose Next at the lower of the window.

Then go to the Cost Center Code on the next screen and hit on Next.

Later, go to the next screen and confirm the billing summary and review the acknowledgment box and hit on Next.

Now, navigate to the next screen and choose Done then OK to complete the creation order.

Assigning an Extension in RingCentral

If you want to assign an extension in RingCentral, then you can follow the provided steps.

Get started by signing into the RingCentral dashboard.

After that, you should go to the Admin Portal to start creating changes.

You have to go to the Users and unassigned Extensions.

Then choose the extension you would like to assign and input their user information.

Allot that user a role, a primary language, regional language, and greeting language settings.

You should choose either “Set Up By User” or “Up By Admin.”

Later choose Save and Enable.

Now, you have to choose, OK to verify.

I’m Justin Hinkle and I have always loved Ohio. It has been a source of joy and comfort to me for many years. I am currently working for McAfee.com/Activate at Newyork but still think of Ohio.

There are numerous advantages of using Siri on your device, and there are several of them that you may not even know about. It may be to convert a picture into GIF, share your music playlist, or getting directions for the nearby concert; the app facilitates everything you can ever need. So, here are the steps to Add & Share Shortcuts on iOS 12 & iOS 13.

Sharing Shortcuts from the Shortcut Editor in iOS 12

If you want to share shortcuts from the shortcut editor in iOS 12, then you need to follow the instructions given below.

First of all, you have to launch the shortcuts app on the iPad or iPhone.

Then you should go to the horizontal ellipsis menu icon on the shortcut you would like to share.

You have to select the share option at the top right-hand side of the screen.

You should go to the share sheet and choose one from the options.

Sharing Shortcuts from the Shortcut Editor in iOS 13

You need to share shortcuts from the shortcut editor in iOS 13, follow the steps mentioned below.

Get started by launching the Settings app on the iPad or iPhone.

Then you should select the Shortcuts app.

You have to switch the“Allow Untrusted Shortcuts” to “On”.

Now, when you launch the information of a shortcut in iOS 13, you will see a share option.

To get started, go to the Shortcuts app on the iPad or iPhone.

Then you should select the horizontal ellipsis menu icon on each shortcut you would like to share.

Navigate to the share option at the lower right-hand side of the screen.

Now, choose one from the options present on the share sheet.

Sharing a Shortcut from the Library in iOS 12

If you want to share a shortcut from the library in iOS 12, then you need to follow the instructions given below.

To begin with, launch the Shortcuts app on your device.

After reaching the shortcut, press and hold it firmly. Keep your finger on the pop-up.

You should swipe upward on the shortcut pop-up.

Then you have to tap on the Share option.

Sharing a Shortcut from the Library in iOS 13

If you need to share a shortcut from the library in iOS 13, then follow the steps mentioned below.

First, you have to launch the Shortcuts app on your device.

Then you should press and hold the shortcut you would like to share.

Now, tap on the Share option.

Sharing a Shortcut from its Settings

If you want to share a shortcut from its settings, then you need to follow the instructions given below.

First and foremost, launch the Shortcuts on the iPad or iPhone.

After that, go to the shortcut and select the horizontal ellipsis menu icon you would like to share.

You have to select the settings option.

Now, navigate to the Share Shortcut option.

Sharing Links to a Particular Shortcut in iOS 13.1

In case you want to share links to a particular shortcut in iOS 13.1, then go through the below-mentioned steps.

Get started by going to the Shortcuts and either select Create Shortcut or choose the +Add option.

Then you should tap on Add Action.

Go to the search bar and input “Get My Shortcuts” in it.

You should tap on “Get My Shortcuts”.

Navigate to the +Add option.

Now, input the “Choose From List” into the search bar.

After that tap on “Choose From List”.

Go to the Show More option.

Switch the “Select Multiple” option to “On” if you would like to be able to choose multiple shortcuts simultaneously.

Navigate to the +Add icon.

Enter “Get Link to File” into the search bar.

After that tap on “Get Link to File.”

Go to the +Add icon.

Input “Copy to Clipboard” into the search bar.

Select “Copy to Clipboard” option.

Then you should select the horizontal ellipsis menu icon in the upper right-hand side of the screen.

You should give a name to the shortcut.

Now, tap on Done and tap again for confirmation.

If you would like to share a shortcut or multiple shortcuts, select the newly-created shortcut.

To get started, go to the Share Shortcut Links.

You should select the shortcuts you would like to share.

Then tap on Done.

You have to tap on Create Links. Then wait for the selected links to be copied, if a tickmark comes on the shortcut.

Now, paste the links wherever you would like to share them.

Sharing Links to all of the Shortcuts in iOS 13.1

If you want to share links to all of the shortcuts in iOS 13.1, then you have to follow the instructions given below.

To begin with, go to the Shortcuts, select the Create Shortcut or choose the +add icon.

You should select the Add Action.

Type “Get My Shortcuts” into the search bar.

You have to tap on Get My Shortcuts.

Tap on +add icon.

Then you should input “Get Link to File” into the search bar.

Go to the Get Link to File.

You should select the horizontal ellipsis menu icon on the top right-hand side of the screen.

Later, give a name to the shortcut.

Now, tap on Done and tap again for confirmation.

If you would like to share all of the shortcuts, select the new shortcut.

Go to Share all shortcuts.

Select Create Links. Now you have to wait for the selected links to be copied. It will take a while according to how much shortcuts you got.

Now, paste the links wherever you would like to share them.

Stopping Share a Shortcut

Wish to stop sharing a shortcut? Then follow the steps mentioned below.

First, you have to locate the shortcut link which you shared before. You can share on iMessage, web or in an SMS to store it to a Note or any other way.

Select the link. It will instantly be taken to the Shortcuts application to see the shortcut.

Now, tap on Stop Sharing and tap again for confirmation.

Adding a Shared Shortcut to the Library

If you want to add a shared shortcut to the library, then you need to follow the instructions given below.

First, you have to go to the file or link for the shortcut you would like to add.

Now, go to Add Shortcut in iOS 12 or Add Untrusted Shortcut in iOS 13 and iPadOS 13.

I’m Justin Hinkle and I have always loved Ohio. It has been a source of joy and comfort to me for many years. I am currently working for Office.com/setup at Newyork but still think of Ohio.

iPad includes a split view feature that lets you open and use two apps side by side on your iPad’s screen. However, the functions may not work with all the apps, but you can definitely take advantage of it in your browsing. That means you can open and work on two websites at a time on your iPad screen with Safari’s split view. For instance, if you want to view your email while chatting or doing anything else, then with the split-view feature, you can do this easily. The split view in Safari is not available in all iPad models or iOS version. Here is how to access and use the split view in Safari of an iPad.Note: Split view in Safari works only in landscape mode.

How to access split view in your Safari browser

It’s easy to open Safari’s two tabs or windows on your iPad screen at a time. You don’t need to do any extra settings for this. The option for opening Split View is given directly in the browser. Here are the steps to get it.

Make sure your iPad is not in the portrait mode.

Now, launch your ‘Safari.’

Tap the ‘Tabs’ icon near the upper right corner of the browser window and hold for a few seconds. You’ll see a pop-up menu with the ‘Open Split View’ option.

Select ‘Open Split View.’

Two Safari windows will now open side by side on your iPad screen.

Tip: If you have a keyboard attached to your iPad, then you can also press the ‘CMD+N’ buttons to access Safari’s split view.

How to open a link directly in the split view

While browsing, if you got a link that you want to open in the split view, then follow these steps.

Launch your ‘Safari.’

Locate the page that has the link you want to open in the split view.

Tap the link for a few seconds.

Select ‘Open Split View’ in the pop-up menu.

The link will instantly open in the new Safari window in the split view. You’ll now see two Safari windows on your iPad screen, one with the first web page and another with the webpage of the selected link.

How to open a tab in the split view

Instead of switching between the tabs, you can open them in the split view to make your work easy. Here is how.

Launch your ‘Safari.’

Decide the tabs you want to open in the split view.

Now, tap and hold that tab.

Drag the tab toward the right or left wherever you want to open it into the split view.

Drag it toward your desired side and release.

That’s it! Your tab will be opened in the split view.

How to close or merge Safari’s split view

Closing the split view is much simpler than opening it, as well as you’ve various ways to do so. Moreover, Safari also gives you a choice to merge tabs and close tabs. If you just want to exit from the split view without closing the tabs of a Safari window, then you can choose ‘Merge Tabs’ or choose ‘Close Tabs’ to close all the open tabs of a Safari window and exit split view. Here is how.

Decide the Safari window you want to merge or close from the split view.

Now, tap the ‘Tabs’ icon near the lower right corner of the Safari window you’re going to merge or close. Doing so shows you several options for tabs in a pop-up menu.

Select ‘Merge All Tabs’ to exit the split view and open all tabs in normal view.

Or, select ‘Close All Tabs’ to close all the tabs open in that Safari window and exit split view.

Tip: You can also tap the ‘X’ icon of any of the Safari window opened in the split view to close its entire tab and exit split-view instantly.

I’m Justin Hinkle and I have always loved Ohio. It has been a source of joy and comfort to me for many years. I am currently working for Office.com/Setup at Newyork but still think of Ohio.

Along with iOS 13 and iOS 13.1, Apple has also launched something new for Apple TV users, and it is tvOS 13. This time, Apple has included a lot of new features and functions from a whole new home screen to gaming controllers support. Not just these, for the first time Apple has brought Control Center for the Apple TV. Just like iPhones and iPads, users can also use the Control Center on their Apple TV. This makes controlling the TV much more comfortable than earlier. Users can switch profiles, view and control playing media, sleep their TV, adjust audio outputs, and much more using their TV’s Control Center. If you’ve also upgraded your Apple TV to tvOS 13 but didn’t know where to access Control Center or confused about using it, then don’t stop reading. You’ll get all your answers in this article.

How to access Control Center in your Apple TV

Accessing Control Center is just as simple as starting your TV. But this time, you’ll have to use the ‘TV’ button instead of ‘Power’. Here is how.

Start your Apple TV.

Now, locate the ‘TV’ button (a round button with a TV symbol) on your Siri remote and press it for a few seconds.

Your Apple TV’s Control Center will appear on the screen. It will show you the time and date at the top, User profiles, Sleep option, Search button, and more.

How to use Control Center in your Apple TV

Now, you need to select an option from the Control Center with your Siri Remote to use it. You can choose ‘Sleep’ to put your TV into sleep mode, choose a user profile to switch to it or select ‘Search’ to find anything, and so on. Here is how to use the Control Center of tvOS 13.

Switching users profile using Control Center

To switch between the user profiles on your Apple TV:

Start your Apple TV.

Access the ‘Control Center’ by pressing and holding the ‘TV’ button on your Sir remote. You’ll now see all the available user profiles just below the time.

Move to the profile you want to switch to and select it using your remote.

Putting your Apple TV into sleep mode using Control Center

To activate the sleep mode on your Apple TV,

Access the ‘Control Center’ by pressing and holding the ‘TV’ button on your Sir remote.

Now, move and highlight the ‘Sleep’ button given in the Control Center menu.

And, select it to activate sleep mode.

Doing so, put your TV instantly into the sleep mode without asking for any confirmation.

Changing the audio output of your Apple TV using Control Center

Access the ‘Control Center’ by pressing and holding the ‘TV’ button on your Sir remote.

Now, move and highlight the ‘AirPlay’ button given in the Control Center menu at the bottom left side.

Select the ‘AirPlay’ button to view available audio outputs.

Now, highlight and select the new audio output you want to use with your Apple TV.

Search anything in your Apple TV from Control Center

To find anything in your Apple TV easily:

Access the ‘Control Center’ by pressing and holding the ‘TV’ button on your Sir remote.

Move and highlight the ‘Search’ button given in the Control Center menu at the bottom right side.

Select the ‘Search’ button to get the search field with the screen keyboard.

Now, type what you want to search using your Siri remote or any other method. You can use Siri dictation to speak and search, connected keyboard or an iOS device to type in.

You’ll see one or more results for your search, highlight and select the movie or show you want to play. With this all, tvOS 13’s Control Center also displays the title of the currently playing music or videos.

I’m Justin Hinkle and I have always loved Ohio. It has been a source of joy and comfort to me for many years. I am currently working for McAfee.com/Activate at Newyork but still think of Ohio.

Facing a Blue Screen Death (BSOD) error might make you worried. In this, the error message states ‘System_Thread_Exception_Not_Handled.’ There is a solution for this problem. Go through this blog carefully to know about it in detail.

Here’s the way of fixing Bthhfenum.sys Blue Screen Error

Go for system restore

Firstly, visit the Start menu.

Then, write Recovery into the search box.

After that, press the option from the search results.

Next, note that the window is displayed.

Then, press on the Open System Restore.

You do have the option of choosing Recommended Restore—Press the option after it and do according to the points given on the screen for completing the procedure. But you might wish to select ‘Choose a different restore point.’ This shall provide access to every present restore point so that you can select the one that you like.

If you went for ‘Choose a different restore point,’ press the Next option and put a tick mark on the square after ‘Show more restore points.’ Remember the time your system was working properly and choose the option from the given list.

Then, press on Next.

After that, tap Finish.

Lastly, press the Yes option whenever given the alert stating, ‘Once started, System Restore cannot be interrupted. Do you want to continue?’

Go for an SFC SCAN

Firstly, visit the Start menu.

Then, write CMD into the search bar.

After that, do a right-click on Command Prompt from the search results.

Next, choose Run as administrator.

Then, press the Yes option on the UAC confirmation prompt.

Into the elevated Command Prompts window which gets displayed, write or copy-paste sfc/scannow.

After that, tap Enter.

Note: If you write the command, you need to have space before ‘/scannow’.

Next, give time for the system scan to get over. It will take some time.

Lastly, restart the system.

Go for the Blue Screen troubleshooter

Firstly, visit the Start menu.

Then, press on Windows Settings.

After that, press on Update and Security.

Next, tap on Troubleshoot.

Then, press on ‘Blue Screen’.

After that, tap on the ‘Run the troubleshooter’ option.

Go for installing the device drivers one more time

Firstly, visit the Device Manager by putting the combination of Windows+X and pressing the option from the menu.

Then, see the window that gets displayed, you might get a Yellow triangle exclamation symbol on center. Do a right-click on all of them.

Next, from the context menu, you need to choose ‘Uninstall’.

After that, press on OK whenever the prompt asking for confirmation gets displayed.

Next, reboot your device.

Then, return to the Device Manager.

After that, press on the Actions option.

Next, choose the option stating ‘Scan for Hardware Changes.’

Lastly, whenever the scan is over, press on Install driver.

I’m Justin Hinkle and I have always loved Ohio. It has been a source of joy and comfort to me for many years. I am currently working for McAfee.com/Activate at Newyork but still think of Ohio.