Honketel

These corrugated steel tape armored cables are suitable for installation in aerial or duct environment for long haul communication, LAN, especially suitable for the situation of high requirements to lateral pressure resistance.

In the GYTA cable, single-mode fibers are positioned in the loose tubes, which are made of high modulus plastic materials, while the loose tubes strand together around metallic central strength member into a compact and circular cable core. For certain high fiber count cables, the strength member would be covered with polyethylene (PE). The water-blocking materials are distributed into interstices of the cable core, and the Aluminum Polyethylene Laminate (APL) is longitudinally applied around the cable core before a PE sheath is extruded over it.

Characteristics:

1.Excellent mechanical and temperature performance  2.Special tube filling compound ensure a critical protection of fibre and resist the water  3.Single steel wire as the central strength member to withstand axial loads  4.100% core filling water prevent cable jelly to ensure the cable watertight 5.AL tape longitudinal cover cable core as moisture barrier  6.Outer sheath protects cable from ultraviolet radiation

Standards:

GYTS/A Comply with standard YD/T901-2009 as well as IEC 60794-1

Temperature Range:

Transportation:-40℃~+70℃;Installation:-5℃~+50℃;In use:-40℃~+70℃

Importance of fiber cable adaptor and its makes use- There are several specific styles of fiber connectors that evolved so we will talk about fiber connectors are quite famous terms. Most well-known connectors in use in recent times have a few, common positioned factors however honketel.com produces great beneficial fiber optical cables for connecting functions.

 How is fiber optic cable utilized in fiber cloth making it beneficial?

The most important component wherein the fiber is installed is the ferrule. The ferrule is a long, thin cylinder with fiber installation within the center hole. The center hole is sized of wholesome fiber's cladding diameter that's 125um. Fiber connector ferrules are made from several styles of materials such as ceramic(Zirconia), stainless metal, and plastic. The ferrule's interest is to center and align the fiber and protects it from mechanical damage. The prevent of fiber is at the pinnacle of the ferrule, wherein the fiber prevents is polished effortlessly each flat or with a curvature. The ferrule is installed withinside the connector body and then the connector body is hooked up to the fiber optic cable structure. Finally, a strain-consolation rubber boot protects the connector-cable junction. Unlike most virtual connectors, Fiber optic fast connector usually now not have male-female polarity. 

Why are Fiber connectors known as mating sleeves receptacles? 

Most fiber connectors are made most effective for connecting functions for the diverse electric line. Instead, fiber connectors mate to each distinction in fiber adapters which can be often referred to as mating sleeves or coupling receptacles. Fiber optic adapters used to mate specific connector sorts in conjunction with an FC connector to an SC connector are referred to as hybrid adapters. Although this technique requires the use of separate adapters, it otherwise reduces fiber connector inventory requirements due to the fact now you need to stock one shape of connector most effectively. Another benefit is that fiber adapters can be designed to mate one shape of the connector to each different, that's a big plus compared to virtual connectors. The fiber's plastic coating is stripped first in advance then the fiber is inserted withinside the ferrule. The center hole through the ferrule is large and enough to wholesome the fiber cladding (this is usually 125um after fiber coating is stripped off) but is enough to hold the fiber in a tough and speedy characteristic without in addition moving. Last phrase and conclusion Fiber optic epoxy or adhesive are injected into the ferrule hole in advance then the fiber is pushed in to hold the fiber in place. The epoxy or adhesive is then cured in an immoderate temperature oven in line with the adhesive producers' instructions.

LAST WORD AND CONCLUSION

 Finally, the fiber prevents is polished to a smooth face on polishing films. The ferrule is then slipped inner each different hollow cylinder in advance of its miles installation withinside the connector body. The connector body includes one or extra quantities that are probably assembled to hold the cable and fiber in place. The connector body is manufactured from metal or plastic. The ferrule prevents protruding beyond the connector body so it may slip into the mating sleeves (fiber adapters). A stain-consolation rubber boot is ultimately slipped over the cable prevent of the connector to defend the cable-connector junction point. In fiber, optic circulation is a part of containers or fiber patch panels, and an array of connector adaptors are installed internally, geared up to plug an input fiber cable in an unmarried side and an output cable withinside the distinction. Fiber connector adapters are also installed in wall outlets, just like the famous telecall phone jacket.

  indoor 12 core fiber optic single mode distribution cable

  Item No. : 520   Hits : 231   Post Time : 2022-1-8

   REQUEST A FREE QUOTE    

Description :                                                           

1.Distribution Optical Fiber Cable

2.The multi-fiber distribution indoor cable is cabled with a PVC sheath or LSZH outer sheath after  the single mode or multi-mode single-core tight-buffered optical fiber 

3.The cable core intert wisted with several high-strength aramid yarns  

Features :

1.Good mechanical and environmental performance;

2.Flame-retardant properties to meet the requirements of the relevant standards;

3.The mechanical characteristics meet the requirements of the relevant standards;

4.Soft,flexible,easy to splice,and with big capacity date transmission;

5.Meet various requirements of market and clients.

https://www.honketel.com/honketel/attach/product/2021827101659.jpg

  indoor 12 core fiber optic single mode distribution cable

  Item No. : 520   Hits : 231   Post Time : 2022-1-8

   REQUEST A FREE QUOTE  

Description :                                                           

1.Distribution Optical Fiber Cable

2.The multi-fiber distribution indoor cable is cabled with a PVC sheath or LSZH outer sheath after  the single mode or multi-mode single-core tight-buffered optical fiber 

3.The cable core intert wisted with several high-strength aramid yarns  

Features :

1.Good mechanical and environmental performance;

2.Flame-retardant properties to meet the requirements of the relevant standards;

3.The mechanical characteristics meet the requirements of the relevant standards;

4.Soft,flexible,easy to splice,and with big capacity date transmission;

Features: Compact size

High coupling efficiency

High reliability

Stable at high temperature Application: 

Various parallel optical transmission areas

Applied to QSFP,SNAP12 AOC,HDMI

Specifications:

Parameters

Specifications

Unit

Number of channels

4.8.12

ch

Material

Quartz,Tempax,Pyrex

V-groove Pitch

250 or customized

um

Polishing Angle

45 or customized

degree

Polishing Direction

Top to Bottom or Bottom to Top

Fiber Type

SM 9/125,MM 50/125,62.5/125 or customized

um

Pigtail Type

Ribbon, scattered

Pigtail Length

Customized

m

Connector

MPO/MTP

MT Insertion Loss

Low IL

<=0.35

dB

High IL

<=0.7

Db

 Fiber Mark

Blue/orange/green/brown /gray/white/red/black/ Yellow/Violet/rose/Aqua

Package Dimension

Customized

mm

Operating Temperature

  -40~85

degree

Storage Temperature

  -40~85

 Fiber optic jumper patchcord OM3 aqua FC to FC multi-mode patch cord

Product Description: he 62.5/125μm OM1 multimode fiber optic cable is suitable for fast Ethernet, gigabit Ethernet and fiber channel applications, such as in data center, telecom room, server farms, cloud storage networks, and any place fiber jumper cables are needed.

Features:

Compliant with international standards such as ANSI, Bellcore, TIA/EIA, IEC, also accord with the industrial standards of Telecom in China Realize the active link of optic fiber transmission Low insertion loss and high return loss Excellent repeatability and interchangeability 

The compact, self-supporting fig 8 aerial fiber optical drop cable was developed to interconnect optical equipment indoors and outdoors in FTTH network branches, it is an enhanced performance FTTH solution. The cable constructed with 2 core single mode bend sensitive fibers (ITU-T G657A/G652D), protected by two strength member and a messenger wire. This cable is very light and easy to install and strip.

Features:

1).Special Low-bend-sensitivity fiber provides high bandwidthz and excellent communication transmission property.

2).Two parallel strength members ensure good performance of crush resistance to protect the fiber.

3).Single steel wire as the traditional strength member ensures god performance of tensile strength.

4).Simple structure, light weight and high practicablity.

5).Novel flute design, easily strip and splice, simplity the installation and maintenance.

6). Low smoke, zero halogen and flame retardant sheath.

Application:

1).Access network

2).Local area network (LAN)

3).Used end users directly cabling

4).Fiber optic communication system

  SC/UPC Drop Fiber Optic Patch Cord/Armored patchcord/Drop cable patch cords

Product Description:A Constructed with a buffered fiber surrounded by an helical stainless steel armor, a layer of kevlar yarn, braiding and TPU outer jacket. It is perfect for military emergency communications, broadcast television, emergency rush through optical fiber communications, mining and other outdoor applications.

Features:

1. All kinds of optical fiber patch cord, optical cable, fiber patch cord, SM & MM available. 2. Standard & custom configurations. 3. Meets Telecordia-GR-326-CORE specifications. 4. Low insertion loss. 5. Ultra low back reflection. 6. For 3.0mm, 2.4mm, 2.0mm jacket or 900μ M buffer. Application: