#ftta patchcord

Fiber Optic Patch Cable|FTTA Waterproof FullAXS DLC-ODVA DLC IP67 7.0mm Outdoor Fiber Patch Cord

These corrugated steel tape armored cables are suitable for installation in aerial or duct environment for long haul communication, LAN, especially suitable for the situation of high requirements to lateral pressure resistance.

In the GYTA cable, single-mode fibers are positioned in the loose tubes, which are made of high modulus plastic materials, while the loose tubes strand together around metallic central strength member into a compact and circular cable core. For certain high fiber count cables, the strength member would be covered with polyethylene (PE). The water-blocking materials are distributed into interstices of the cable core, and the Aluminum Polyethylene Laminate (APL) is longitudinally applied around the cable core before a PE sheath is extruded over it.

Characteristics:

1.Excellent mechanical and temperature performance  2.Special tube filling compound ensure a critical protection of fibre and resist the water  3.Single steel wire as the central strength member to withstand axial loads  4.100% core filling water prevent cable jelly to ensure the cable watertight 5.AL tape longitudinal cover cable core as moisture barrier  6.Outer sheath protects cable from ultraviolet radiation

Standards:

GYTS/A Comply with standard YD/T901-2009 as well as IEC 60794-1

Temperature Range:

Transportation:-40℃~+70℃;Installation:-5℃~+50℃;In use:-40℃~+70℃

 Fiber optic jumper patchcord OM3 aqua FC to FC multi-mode patch cord

Product Description: he 62.5/125μm OM1 multimode fiber optic cable is suitable for fast Ethernet, gigabit Ethernet and fiber channel applications, such as in data center, telecom room, server farms, cloud storage networks, and any place fiber jumper cables are needed.

Features:

Compliant with international standards such as ANSI, Bellcore, TIA/EIA, IEC, also accord with the industrial standards of Telecom in China Realize the active link of optic fiber transmission Low insertion loss and high return loss Excellent repeatability and interchangeability 

The compact, self-supporting fig 8 aerial fiber optical drop cable was developed to interconnect optical equipment indoors and outdoors in FTTH network branches, it is an enhanced performance FTTH solution. The cable constructed with 2 core single mode bend sensitive fibers (ITU-T G657A/G652D), protected by two strength member and a messenger wire. This cable is very light and easy to install and strip.

Features:

1).Special Low-bend-sensitivity fiber provides high bandwidthz and excellent communication transmission property.

2).Two parallel strength members ensure good performance of crush resistance to protect the fiber.

3).Single steel wire as the traditional strength member ensures god performance of tensile strength.

4).Simple structure, light weight and high practicablity.

5).Novel flute design, easily strip and splice, simplity the installation and maintenance.

6). Low smoke, zero halogen and flame retardant sheath.

Application:

1).Access network

2).Local area network (LAN)

3).Used end users directly cabling

4).Fiber optic communication system