Error 0x800CCC0F when sending or receiving email,Error 0x800CCC7D when sending email,Error 0x800CCC78 when sending,Error 0x80040119 when sending,Sending reported error 0x80042109,Outlook cannot connect to your outgoing smtp server,Error 0x80040119 when sending,0x80040119,outlook Unknown error,Unknown error,error messages when you try to read,Error 0x80042108 when receiving messages,5.5.0 smtp,553 sorry,Outlook Send Error,The operation failed,Object not found,An object could not be found,Your Outlook profile is corrupt,Your automatic SMTP settings are not picked up correctly,Sending Receiving reported error,Outlook data file cannot be accessed,error 8004010F,Emails are being saved to the wrong location,your Outlook profile is configured incorrectly,Outlook does not have enough permissions to write to the data files,Sending reported error 0x800CCC80,None of the authentication methods supported by this client are supported by your server,Your outgoing mail server settings are wrong,Outlook error code 8,Outlook is unable to connect to the proxy server, Task reported error 0x8004210A,the operation timed out while waiting for a response from the receiving server,Your connection to the mail server is too slow,You are sending or receiving large series of emails or a really large email attachment, Your incoming outgoing emails are being scanned by an anti-virus,The Outlook Send & Receive job is being blocked by a firewall,
Task – Sending reported error (0x80042109) : Outlook cannot connect to your outgoing (SMTP) e-mail server.
Check your outgoing server name, the port number and SSL setting, and the authentication setting. Open the Account Settings dialog, double click on the affected email account. Is the server name correct? Click the More Settings button. Check the authentication settings on the Outgoing server tab, and the port number and SSL settings on the Advanced tab.
Error 0x800CCC0F when sending or receiving email.
Usually caused by Antivirus software scanning email, but antispam scanners may cause Outlook to return this error as well. Disable the email scanning or increase the timeout setting. Also, make sure your firewall is allowing the scanner software to connect to the Internet.
Error 0x800CCC7D when sending email
This error code means you have SSL enabled and your mail server doesn’t support SSL. Disable SSL in Tools, Email Accounts, double click on the account, More Settings, Advanced tab. The error message may say that it’s a Secure Sockets Layer error.
Error 0x800CCC78 when sending
Verify the address you have entered in the From field is correct. Make sure there are no leading or ending spaces or other simple to overlook typos in your address. Verify sending authentication is correct in the Outgoing server tab of the More Settings dialog.
Error 0x80040119 when sending
“0x80040119″ and“Unknown error” error messages when you try to read, send, receive, or deletee-mail in Outlook (814441) Disable the application accessing Outlook’s data and restart Outlook. You may need to reboot the computer before Outlook will send.
Error 0x80042108 when receiving messages.
There are a couple of causes for this error. You may have SSL enabled and don’t need it or you are running Norton Personal Firewall 2002 or Norton Internet Security software.
#5.5.0 smtp;553 sorry, that domain isn’t in my list of allowed rcpthosts (#5.7.1)
This means the server you are trying to send to is blocking mail sent from your server. You’ll need to contact the recipient’s administrator or send your message using a different mail server.
553 5.7.1 Sender address rejected: not owned by user
This means you are not using the correct outgoing (SMTP) server authentication settings.
In Outlook 2007, go to Tools, Accounts Settings. In Outlook 2010 and 2013, go to File, Account Settings. Double click on the email account then click MoreSettings. Select Outgoing Server tab. Select Log on using and enter the username and password that can send using this SMTP server. Enable SPA only if your server supports it.
. An object could not be found” or “Object not found”
Description: the “object not found” error message is triggered when you are trying to send an email from Outlook. The regular reasons are:
· Your Outlook profile is corrupt
Solution: go to the Windows Control Panel -> Mail -> Mail Setup -> Show Profiles -> Add. Create a new Outlook profile, add your email account(s) to it, open Outlook with your new profile and try sending the message again.
· Your automatic SMTP settings are not picked up correctly
Solution: manually configure your outgoing SMTP server settings in Outlook. The easiest way to do it is by removing your email account (from the Outlook file menu -> Account Settings) and adding it again (this time make sure you do not use the option to auto-detect mail server settings). If you are unsure about the SMTP values, please contact your email provider.
· While using Outlook in Workgroup or Corporate modes, one of your Outlook PST data files was moved or erased
Solution: create a new Outlook profile and re-add your data files to it. For step by step instructions, please see
http://support.microsoft.com/kb/292022
2. Sending / Receiving reported error: “
Outlook data file cannot be accessed (error 8004010F)
Description: the error message is triggered when you are sending or receiving emails. The regular reasons are:
· Emails are being saved to the wrong location
Solution: If you are using multiple email account or data files, it is possible that Outlook tries to save emails to a wrong location. To solve it, please remove your Outlook data files from your Account Settings -> Data files list and add them back again. Alternatively, you can also try by changing the folder where emails are being delivered (select the desired account from File -> Account Settings and click on “Change Folder”).
· Your Outlook profile is configured incorrectly
Solution: create a new Outlook profile and add your existing data files to it by following these steps: http://support.microsoft.com/kb/292022
· Outlook does not have enough permissions to write to the data files
Solution: this situation usually happens if you upgraded to Windows 7/8 while keeping your Outlook installation in place. To solve it, you have to take ownership on the data files by following these steps:http://technet.microsoft.com/en-us/library/cc753659.aspx
3. Sending reported error (0x800CCC80): “None of the authentication methods supported by this client are supported by your server”
Description: the error message is triggered when you are trying to send an email from Outlook. The regular reason is:
· Your outgoing mail server settings are wrong
Solution: edit your account settings and mark the option “Log on to incoming server before sending mail”. To reach this option, go to your Outlook File menu -> Account Settings -> double click on your email account -> More Settings -> Outlook Server -> mark the option “My outgoing server (SMTP) requires authentication”, then mark the option “Log on to incoming server before sending mail”. You can also try to use the “Repair” option available on your Account Settings window.
4. Outlook error code 8: “Outlook is unable to connect to the proxy server”
Description: the error message is triggered when you are trying to send or receive emails from Outlook, through a proxy server. The regular reasons are:
· Your Windows root certificates are outdated
Solution: open Windows Update and look for updates to the Root Certificates list. Mark these updates and install them.
· You are using a self-signed certificate
Solution: by default, a self-signed certificate is added to the Intermediate Certification Authorities. You have remove it from there, then import it to the Trusted Authorities list.
Here is a step by step tutorial on how to add a Certificate to Windows.
5. Task reported error 0x8004210A – “the operation timed out while waiting for a response from the receiving server”
Description: the error message is triggered when you are trying to send or receive emails from Outlook. The regular reasons are:
· Your connection to the mail server is too slow
Solution: try freeing up your Internet connection by closing downloads or other in-progress online activities. If the problem persists, try to increase your mail server time out periods: go to the Outlook File menu -> Account Settings -> double click on your email account -> More Settings -> Advanced -> increase your server timeouts period.
· You are sending or receiving large series of emails or a really large email attachment
Solution: if you are sending or receiving a large email attachment, your email account remains locked while the operation is performed. If this operation takes more than your automatic Send & Receive periods, the next Send & Receive job will start while the previous one was not completed it. In this case, the mail server will time out or it will respond with error 0x8004210E: “Your mailbox is already locked”. To solve it, simply wait for the large email to be sent or received. Alternatively, if your email account offers web access, connect to your mailbox from your Internet browser and delete those incoming messages that are not important. This way, you will ease your Outlook Receive task.
· Your incoming / outgoing emails are being scanned by an anti-virus
Solution: On some occasions, an email anti-virus may interrupt or delay your Outlook Send & Receive process, causing Outlook to wait too much for the emails to arrive or to be sent. Disable your anti-virus for this operation. If the problem persists, contact your anti-virus provider.
· The Outlook Send & Receive job is being blocked by a firewall
Solution: A firewall may prevent Outlook from reaching your mail server, so please disable your firewall (or add Outlook to its allowed/white list).
