Data Recovery Tips & Solutions

 Steps to Recover Files off RAW RAID Drive

Preparation: Free download and install iCare Data Recovery on a Windows computer. Please do the software on the RAID disk showing install the RAW file system.

 Step1. You enter the main interface of software, you must select the appropriate scan mode.

Step2. Choose the drive who has a RAW file and wait patiently when the software scans for the lost files.

Step3. Preview files after scanning and then you can save the lost files on another drive.

 Causes for RAID Drive RAW Error

RAW drive is a problem that usually occurs on all storage media, including memory card, USB drive, external hard drive and RAID hard drive and more. Everything happens because of certain reasons, while the causes of RAW RAID disk problem can be:

• RAID disk formatting is complete. Probably you accidentally format the RAID disk option. When you realize the error, click the Cancel button until formatting is complete. In this situation, when you double-click the drive again, you receive a message like drive is not formatted, format now you want and will restore the file from the RAID drive to the RAW format.

• RAID hard drive is damaged due to virus infection. If the drive is infected with the virus, it can corrupt the file system of the disc, in which the position RAID hard drive can display the RAW file system and become inaccessible.

• There are bad sectors on one or more hard drives (are) used to create the RAID array. If a hard disk has no bad sector, and the files are stored directly on the bad sectors, the RAID volume can report errors also RAW format.

As mentioned above, the most common reasons that can cause you to use RAID volume problem of RAW, in which situations you iCare Data Recovery to recover inaccessible data.

CHKDSK Is Not Available for RAW Drives in RAID Array

 When the disk drive error in RAW RAID array, it can give you a number of related information, such as display:

• CHKDSK is not available for RAW drives

• The type of file system is RAW

• You need to format disk before you can use it (or disk is not formatted would you like to format it now)

• RAID disk is not accessible, the space of 0 bytes and RAW

• You cannot run Chkdsk.exe

iCare Data Recovery can recover inaccessible files when you receive the same message over and cannot access all data on the RAID volume.

Convert RAID Partition RAW to NTFS

Step 2 - Select array members and RAID types

2.      Select all the disks that were members of the RAID

If case of RAID5 recovery with one of the member disks missing, select all the available drives. ZAR RAID recovery software will reconstruct the missing data automatically.

The order of disks is reconstructed automatically, you cannot specify it here.

3.      Select the RAID layout (also called "RAID level").

4.      Click "Next" to start the RAID reconstruction.

Step 3 - RAID layout reconstruction

This is completely automatic. It's probably been completed for a RAID rebuild before the progress bar reaches 100%. In an extreme case, the RAID recovery can be performed in less than 10 minutes. This is expected behavior.

Step 4 - Select the partition on the RAID

5.   Select the partition on the array you need to recover. Use  "More  functions..." button and run a partition recovery if required.

6.   Click "Next"

Step 5 - File system reconstruction

This part is fully automatic.

Step 6 - Mark files to copy

7.   Mark files and folders to recover by clicking their corresponding check boxes

8.   Click "Next"

Step 7 - Copy the files

9.   Enter the name of the folder for the recovered files

But do not be angry! Even if the external hard drive is formatted, you can still recover data from formatted with a professional data recovery tool. But you should avoid the use of an external hard drive for additional data storage because it can result in overwriting the data on the memory card drive. Moreover, it is best if you learn all the circumstances, when the external drive is formatted, some of which are mentioned below:

Mistakenly clicking on “Format” option: While ejecting an external hard drive of your computer, you can accidentally press the "Format" option instead of the "Eject". When you click the "Format" option, which will alert you by popping up a message asking if you are sure that the formatting or not. If you continue without worrying while your external hard drive is formatted and you will lose your data.

Formatting when memory is full: Your computer has the player with red when the portable hard disk is almost full. If you have the files on the external hard drive transfer, and if the file is very large, so you can format the external hard drive and later realize that he had the necessary files.

Formatting to get rid of corruption: external hard drive formatting is required if it was spoiled or logically corrupted for any reason. You cannot access training data and store it until you format it. So to make free external hard corruption and other faults, you must take it erases all data stored on it.

Can data be recovered from a formatted external hard drive?

Even if the computer has no manual option to recover lost files and folders from formatted external hard disk, it is possible to recover formatted data. Quite simply, you need to seek technical assistance or use effective third-party recovery software like Yodot to bring hard drive recovery in external HD data. Also, you can restore data from formatted, re-partition, damaged external hard drive or even if you are unable to work after a logical corruption. It supports the restoration of the famous brands of external hard drive data such as Seagate, Toshiba, Western Digital, Maxtor, Kingston, etc. on Windows systems.

Steps to recover formatted external hard drive data:

 Download Yodot Hard Drive Recovery software and install it to your computer desktop PC

 Run the installed application and follow the on screen procedures

 You will be presented with two options which are “Partition Recovery” and  “Formatted/Reformatted Recovery”

 Select “Formatted / Reformatted Recovery” option from the main screen continue

 The application scans and shows all the logical and physical drives     including your external drive

 Choose the external hard drive and click on “Next” button

 The software scans the hard drive and shows all the drives present in it

 Select the drive from where data is to be recovered and click on “Next”

 The tool scans the selected drive and displays all the recoverable files  from it

 Select the files and folders which you want to recover and click “Next”

 Preview the restored files and browse for the destination location to save your rescued files

 Useful Steps:-

Carefully disconnect external hard drive from computer and don’t take out removal drive in between data transfer process

Recover files from formatted hard drive is realistic

Formatting a disk is not the data on the disk; just delete data on the address tables. As formatted data repair is realistic. If you accidentally disc format useful files do not panic, a data recovery company can help you to get most of the information on the disk. And you can also programs that allow you to recover formatted hard drive you try

How to recover files from formatted drives by yourself

EaseUS Data Recovery Wizard is your best choice. This allows you to complete the work of recovery in a few simple clicks. You can download the software and follow the guide below to recover your lost data.

Step 1. Launch EaseUS Data Recovery Wizard and select the type of file you want to recover. Then click the "Next" button to proceed to the next step.

Tip: If you cannot start your computer, you can use the bootable disk data recovery or connect the hard drive to another computer as a slave to recover lost data.

Step 2. Select the disk where your lost data and click "Scan", the software will quickly analyze the selected drive to your target files. If you lost the partition, select "Lost Disk Drives" and "Scan" to continue the recovery process.

Step 3. After analysis, you can see one listed all recoverable files and select one you want. Then click on "Restore" to restore once. Here you need to store all recovered files to another drive to avoid overwriting data.

 The data on a RAID array inaccessible due to one of the following reasons:

 1. Deleted files, even when files emptied from Recycle Bin.

 2. Accidentally formatted, even if you installed Windows again. 

 3. The file system on the hard drive was RAW. 

 4. crashed Windows operating system. 

 5. Accidentally deleted or lost partition.

 6. Hard disk has been shared. 

 7. Partition error. 

 8. Accidentally close computer or remove the external device.

 9. Software, virus attack, hacker attacks, etc. 

 The above problems can be easily solved by EASEUS Data Recovery Wizard with a fast and efficient RAID recovery. How to recover data from RAID with EaseUS Data Recovery Wizard? EaseUS Data Recovery Wizard can support hardware RAID (RAID0, RAID1, RAID5, RAID10, etc.) support, while only EASEUS Data Recovery Wizard Professional is software RAID (dynamic disk).

  Is there anything  I should pay particular attention after the loss of data on the RAID?

The following suggestion should pay extra attention to after data loss.

1. Keep intact RAID array.

2. Do nothing (crushing / format) RAID partition that you do not lose data.

3. Data recovery software is not installed on your RAID partition to recover data.

4. Save the recovered data to another RAID partition that you do not want to restore data.

1. DiskInternals

DiskInternals Raid Recovery uses a fully automated system for data recovery from RAID. It is not mandatory to have an automatic data recovery with this software; You can also do it manually yourself.

Advantages:

·        The automatic mode allows users to sit back and let the software do it all.

·        It can switch between automatic and manual modes.

·        It automatically detects the disk array type.

Disadvantages:

·        The manual mode will cause the software to decide the array type based          on user inputs rather than the reality.

2. GetDataBack

GetDataBack software come in two forms, one for FAT and one for NTFS file systems. You can purchase based on your need.

Advantages:

·        Read only design; no accidental deletions are possible.

·        Supports SSD, USB, flash cards and all hard drives.

·        Supports NTFS, FAT12, FAT16 and FAT32 file types.

Disadvantages:

·        It tends not to work in a few PCs, especially with Windows Operating                  System.

 3. ReclaiMe Free raid recovery

ReclaiMe Free raid recovery is not an entirely free data recovery software. This is a platform where you can actually see which files are available for recovery. You can decide whether you have the data you needed or not.

Advantages:

·        You can view the directory, files and folders in the damaged disk for free.

·        Various levels of RAID could be recovered.

·        Most NAS devices are supported for data recovery.

Disadvantages:

·        Once you have identified the data you needed, you will have to purchase          some actual data recovery software or find space in your disk to copy                your data.

·        Runs only on Windows Operating System.

4. Zero Assumption Recovery

This software allows you to recover data from your storage drives with various issues to solve. raid data recovery is one of the options. This software performed a number of other functions.

Advantages:

·        It Can recover formatted volumes, deleted files and RAW files.

·        Special recovery of digital photos.

·        MBR damage recovery.

Disadvantages:

·        Runs only in Windows and Linux; not in Mac

·        The recovery process takes a long time and you cannot intervene in the             middle of about 3 hours.

5. R-Studio Data Recovery Software

This is a collection of software initially produced by R-Tools technology. It uses some of the advanced techniques and features in data recovery today.

Advantages:

·        Data pattern recognition and interpretation accordingly.

·        Non standard nested levels of RAID could be recovered.

·        Automatic RAID parameter recognition and consistency check.

Disadvantages:

·        No guarantee to recover all lost files.

·        Overwriting might occur if attempted to copy lost files to the same disks.

RAID mechanism can be seen in the two sections depending on the nature of the next RAID in addition to the RAID numbers. There are two hardware RAID and software RAID

Differences between Hard Raid and Software Raid

Hardware RAID

Hardware RAID means a mechanism based on the material. The equipment is designed and included in order to satisfy the RAID mechanism. It can be performed by means of a RAID-system board or be integrated into the motherboard itself. In this kind of individual drives technology are used, but the system has all the same disc. The resulting capacity RAID disk depends on the number of units, and the RAID level. Usually, the number of RAID, plus the ability resulting from the disk, because a lot of space for parity and make data recovery much easier than the previous level. For example, if the same number of disks with the same capacity is used RAID 0, the resulting capacity will be higher than when they are used in a RAID 6 disk.

Software RAID

Step 2: Run Restoration. If you should be using Windows 7 or Windows-8 then you may have to right-click Restoration and pick “Run as Administrator”. Next, pick the drive you intend to scan. Form it into the “All or part of the file” box, knowing the file name or at least a part of it. Should you simply leave it blank. You are able to verify the box “Include used clusters by other files” but when this pertains to the file you are currently wanting to recover then it will probably be damaged. You can now click “Search Deleted Files”.

Step 3: May read through the file checklist to get the record that you'd want to restore when it's completed checking you. Emphasize it as soon as you think it is and press “Restore by copying”.

Step 4: You'll now be questioned where you should save the document. If you try and save it to the same drive you are scanning you will be asked should you want to pick a different drive so you don’t overwrite the initial data. You ought to be ready to open it after you have done restoring the file.

I would recommend using is Recuva if Restoration can’t perform the job then your tool that is next. Similar to Restoration, Recuva is a free utility that let’s once your recycle bin has emptied you undelete records. It's unique scanning techniques than if the standard scans aren’t functioning Restoration including a “deep scan” element. Here is to use it.

Step 1: Download Recuva onto a drive besides the one that you need to recover files from.

Step 2: Run Recuva. You'll be presented with a wizard to consult you which kind of file you want to recover. In case you aren’t certain then simply choose “All Files”.

Step 3:  Where the files can be found next you will be requested. If these files were deleted in the recycle bin subsequently pick “In the Recycle Bin”.

Step 4:  You are now ready to begin your scan. This is also where you could decide to Permit Deep Scan if Recuva is having difficulty choosing the file.

Step 5: Now you can select the file you intend to recover, after the scan has completed. Find the file and press the button that is “Recover”. Choose a place that's not around the drive you want to recover from, usually, you may overwrite your file.

Disk Drill

Disk Drill is among the latest recovery apps for the Mac OS X software and it has easily been deemed one of many best. You are able to obtain the Fundamental Edition for free that will permit you to see a listing of the records that you could recover. If the files you wish to recover are found, after that you can choose the Pro Model and move forward using the restoration.

PC Inspector File Recovery

PC Inspector File Recovery is the recovery software. It’s however a decent restoration tool and can be utilized if you are not able to recover the files you will need with Recuva.

When you release PC Inspector File recovery, you'll need to select your language. After this, you'll be offered a pleasant screen providing you with three possibilities.

The first selection is “Recover Deleted Files”. This enables one to restore documents that have been permanently erased in the drive. When the deleted file hasn't been already overwritten this may simply operate.

The next selection is “Find Lost Data”. This enables you to recover information that has been dropped as a result of program freeze. Should you choose this option, you will be requested for the “start cluster”. Keep the entire drive to be scanned by the standard settings. The scan could take a number of hours-depending on what large your drive is.

The next selection is “Find Lost Drive”. If your drive letter is not arriving in My Computer or Windows Explorer make use of this solution. It'll make an effort to hook up with the drive and when productive, allow the data to be browsed by you.

Hiren’s BootCD

Hiren’s BootCD enables you to start in to a slimmed-down version of Windows named MiniXP in the bootable CD or bootable flash-drive and manage diagnostic utilities on a problematic PC. Recuva is among the tool that comes bundled with Hiren’s so you can manage it from the comfort of the CD. This is valuable in case you don’t possess a USB to IDE/SATA adapter or just don’t wish to take on the drive from your unit.

You'll need to link another drive for the machine like an external hard drive or a USB flash drive so you will have a spot to copy your recovered data to.

GetDataBack

When the free tools are not currently doing the secret then offer a try to GetDataBack. GetDataBack comes in one for NTFS, two distinct designs as well as the additional for FAT files system. If you prefer to make sure it’s going to function first before you pay $79 for your NTFS version they are doing possess a test version that may let you view what records it may recover. You can buy the full version there and right then without also needing to close out of the program if you like what you observe. When other healing practices have failed I know have experienced lots of achievement with GetDataBack.