Group 7 Computer Performance Task

We now attached all the necessary wirings especially from the buzzer and the PIR MOTION sensor, since the house structure is already done. 

DAY 4: The continuation of the soldering of the wirings of the PIR motion sensor. The continuation of the miniature house and the programmer researching for reference for setting up the whole robot 

Progress of the team for this day.......The house almost finished and well done. If time would allow, we could attach the buzzer and the PIR motion sensor.

DAY 3: The continuation of the making of the house. While doing this, we first had to fit in the walls properly in order for the other components to be fitted according to our plan. Yeshua and Michael on the right side picture is starting to solder the wires of the PIR motion sensor.

We started making the base of the miniature house. And if time would allow us, we could start making the structure of the house as a whole.

We planned about the miniature house since, we’re going to use the miniature house for our robot, because basically our robot SeSy is to prevent unwanted guests to go to the house through the buzzer 

The picture of the plan, a little bit blurry but at least we made one, especially that this type of robot we’re going to make is for houses.

Michael Tan

PS: click the pic to read the description of our illustration.