Z-lion Concrete Tools

Resin triangle diamond polishing pads are designed to be used on oscillation grinders such as FEIN MultiMaster,Dremel Multi-Max etc. for polishing corners，edges and other small areas where floor grinders and hand-held grinders can not reach. Dot pattern good for both wet and dry polishing.

Popular size of resin triangle diamond polishing pads are 3"(80x80x80mm) or 4" (93x93x93mm). Available grits 800# 1500# 3000# 7000# Resin triangle diamond polishing pads in dot pattern can be used in both wet and dry applications. The pads are in special triangular shape in order to reach the furthest depths of corners and edges. Used after vacuum brazed or electroplated triangle polishing pads for fine polishing of corners and edges. Used on oscillation sanding machines such as FEIN MultiMaster,Rockwell SoniCrafter, Dremel Multi-Max, Ryobi detail sanders etc.

Z-LION dot pattern resin triangle diamond polishing pads are widely used in concrete floor polishing industry for polishing corners and edges where general grinding machines can not reach. The special features of Z-LION resin triangle polishing pads are as follows: High quality diamonds and resins are used in the formula to ensure good polishing quality and long lifespan. New technology instead of hot pressing is used to make this pad to ensure its high quality and quality consistent. With high heat resistant resins and unique dot pattern design, the pad can work well with or without cooling water. No resin transfer, nice clarity and high gloss after polishing. High temperature resistant glue is used to glue the velcro, no velcro peeling off even under high temperature in dry polishing application.

Dry resin triangle diamond polishing pads are designed to be used on oscillation grinders such as FEIN MultiMaster,Dremel Multi-Max etc. for dry polishing of corners，edges and other small areas where floor grinders and hand-held grinders can not reach. Special honeycomb pattern good for dry polishing.

Popular size of dry resin triangle diamond polishing pads is 3"(80x80x80mm). Available grits 50# 100# 200# 400# 800# 1500# 3000#. Unique honeycomb design good for dry polishing. Bigger particles on the rim reduce the possibility of particle peeling off, increase life of the pad. The pads are designed in special triangular shape in order to reach the furthest depths of corners and edges. Usually used for dry polishing of corners and edges on concrete floor surface. Used on oscillation sanding machines such as FEIN MultiMaster,Rockwell SoniCrafter, Dremel Multi-Max, Ryobi detail sanders etc.

Z-LION honeycomb dry resin triangle diamond polishing pads are widely used in concrete floor polishing industry for dry polishing of corners and edges where general grinders can not reach. The special features of Z-LION honeycomb dry resin triangle polishing pads are as follows: High quality diamonds and resins are used in the formula to ensure good polishing quality and long lifespan. New technology instead of hot pressing is used to make this pad to ensure its high quality and quality consistent. With high heat resistant resins and honeycomb design, the pad works excellent in dry polishing applications. High heat resistant glue is used to stick the velcro, no velcro peeling off in dry polishing application without any cooling water.

Z-LION 10 segment diamond grinding puck is a popular diamond tool for fresh concrete floor polishing and used concrete floor restoration. Straight edge, bevel edge and round edge segments are all available. Come with velcro back or metal back and with multiple holes and pins configurations to fit a wide range of floor grinders. Metal back also can be mounted to magnetic tool holders.

Popular size is 3”(76mm, 80mm or 83mm in diameter), 4” is also available. 10 segments with thickness of 8mm provide super grinding capacity and long life. Straight edge, bevel edge and round edge segments are all available. Straight edge with better cutting capacity, bevel and round edge are better for lippage removal. Rubber layer in the middle to absorb the vibration. Come with velcro back or metal back and with multiple holes and pins configurations to fit a wide range of floor grinders like HTC, STI, Onfloor, Diamatic, SASE etc. Velcro back is good for quick change. Metal back also can be mounted to magnetic tool holders or quick change adapters. Soft, medium and hard bond are available for different hardness of concrete floors. Extra soft, super soft, extra hard and super hard are also available if needed. Available grits: 6#,16#,30#, 50#, 70#, 100#, 120#, 200#, 400# The tool can be painted in different colors as per grit number or as per bond hardness.

Z-LION 10 segment diamond grinding pucks are for grinding concrete floor and get it ready for polishing. Especially good for heavy duty grinding. The special features of the tool are as follows: High quality diamond is used in the matrix to make the tool with good grinding capacity. Diamond segments are hot-pressed and professionally welded onto the base plate. Density of segments is reasonable and professional welding help to extend the lifetime of the disc. Segments are super aggressive and with longlife. 10 segments with thickness of 8mm will cover 20000-40000 square feet. Rubber layer in the middle with correct hardness will absorb the vibration and at the same time increase the adhesiveness of velcro as well. No risk of velcro peeling off. High quality velcro back, with good adhesiveness even when the tools are worn out. With multiple holes and pins configurations on the back the tool can be mounted to a wide range of floor grinders without an adapter.

Z-LION double bar dovetail diamond grinding shoes is a popular grinding tool in the market. Mainly used on Husqvrana floor grinder for concrete floor surface preparation like lippage removal, thin coating removal, rough surface grinding etc. Attach to floor machine via dovetail on the back which is similar to Husqvarna redi-lock.

Come with special dovetail on the back to fit Husqvarna floor grinder. 2 rectangle segments 40x10x10mm. Segment shape can be changed to round, rhombus, coffin, arrow etc. Single segment or double segments are all available. Like the traditional trapezoid grinding tools, the tool is mainly used for lippage removal and surface grinding on concrete floor, coarse grits can be used for removing thin coating on the surface of concrete floor as well. Soft, medium and hard bond are available for different hardness of concrete floors. Extra soft, super soft, extra hard and super hard are also available if needed. Available grits: 6#,16#,30#, 50#, 70#, 100#, 120#, 200#, 400# The tool can be painted in different colors as per grit numbers or as per bond hardness.

Z-LION double bar dovetail diamond grinding shoes are for Husqvarna floor grinder which is one of the most popular concrete floor grinding machines in the market. The special features of the tool are as follows: High quality diamond is used in the matrix to make the tool with good grinding/cutting capacity. Diamond segments are hot-pressed and professionally welded onto the metal base. Density of segments is reasonable and professional welding help to extend the lifetime of the tool. Segments are super aggressive and with longlife. 2 rectangle segments 40x10x10mm will cover 6000-18000 square feet. Besides the matrix, segment shape, segment numbers as well as the layout of segments will affect cutting capacity and life of the tool as well. We have a wide range of segment shapes and layout options to help customers to find out the most suitable tool quickly. Dovetail on the back fits Husqvarna grinder precisely. A rubber hammer is enough when you need to remove the tool from tool holder.

Z-LION double button trapezoid diamond grinding plate is a typical shape of concrete grinding tools which matches with most floor grinders in the market. Trapezoid grinding plates are widely used for concrete floor surface preparation such as lippage removal, thin coating removal, rough grinding etc. Bolt to machine via the 3 holes on the plate, different hole size for different floor grinder.

Typical trapezoid shape matches with most floor grinders. 2 Round segments diameter 25mm and thickness 12.5mm.Mainly used for lippage removal and surface grinding on concrete floor, coarse grits can be used for removing thin coating on the surface of concrete floor as well. Bolt to floor grinding machines via the 3 holes on the plate, universal 3-M6 holes for floor grinders like STI,SASE etc. 3-D9mm holes for Chinese floor grinders such as Xingyi,ASL etc. For Diamatic or Blastrac grinder there are 2 sets of holes. Segment shape can be changed to rectangle,rhombus,coffin,arrow etc. Number of segments can be reduced to one or increased to three. Soft, medium and hard bond are available for different hardness of concrete floors. Extra soft, super soft, extra hard and super hard are also available if needed. Available grits: 6#,16#,30#, 50#, 70#, 100#, 120#, 200#, 400# The tool can be painted in different colors as per grit numbers or as per bond hardness.

Z-LION double button trapezoid diamond grinding plates are for concrete floor surface preparation. It is one of the most popular diamond tools for concrete floor preparation. The special features of the tool are as follows: High quality diamond is used in the matrix to make the tool with good grinding/cutting capacity. Diamond segments are hot-pressed and professionally welded onto the trapezoid plate. Density of segments is reasonable and professional welding help to extend the lifetime of the tool. Segments are super aggressive and with longlife.2 round segments dia.25mm with thickness of 12.5mm will cover 8000-20000 square feet. Metal back with correct thickness ensure segments be worn out completely even when fitted in the bay of tool holder. With 3 threaded holes,3 through holes or 3 threaded holes and 3 through holes, the tool can be mounted to a wide range of floor grinders in the market. Suitable for both light weight grinders and heavy duty grinders. With metal back can be mounted to magnetic quick change adapters too so will work on popular grinders like HTC, Husqvarna,Lavina as well.

Z-LION diamond grinding cup wheel is mainly used on hand-held grinders like Hilti for rough grinding and shaping of concrete surfaces, edges or corners where floor grinders can not reach. Arrow cup wheel comes with arrow diamond segments.

Popular size of arrow cup diamond grinding cup wheel is 5inch and 7inch.5inch usually comes with 8 segments and 7inch comes with 12 segments. Metal base comes with several big holes to reduce weight of the tool, provide more efficient dust collection and keep the diamond segments cool. Usually comes with 22.23mm bore, can be with M14 or 5/8-11 thread as well. Mainly used on hand-held grinders like Hilti, but can be used as grinding head on some walk-behind floor grinders as well. When used on hand-held grinders mainly for grinding and shaping of edges or corners where floor grinders can not reach. Soft, medium and hard bond are available for different hardness of concrete floors. Extra soft, super soft, extra hard and super hard are also available if needed. Available grits: 6#,16#,30#, 50#, 100#, 200#, 400# The tool can be painted in different colors as per grit number or as per bond hardness.

Z-LION arrow cup diamond grinding wheel for hand-held grinders for concrete grinding. The special features of the tool are as follows: High quality diamond is used in the matrix to make the tool with good cutting/grinding capacity. Diamond segments are hot-pressed and professionally welded onto the metal base. Density of segments is reasonable and balance of the tool is good so extend the lifetime of the tool. Diamond segments can be change to other shapes like rectangle,rhombus,T shape, S shape, L shape etc. Number of segments can be increased or reduced depending on specific application. Cup wheels with fewer segments offer faster, more aggressive grinding; while cup wheels with more segments provide smoother finishing and longer life. Metal base comes with big holes to reduce total weight of cup wheel, provide more efficient dust collection and cool down segments during work. Every cup wheel has to pass our balance testing, so the tools are in good balance, work smoothly and wear reasonably. Work with hand-held grinders, cover small areas that floor grinders can not reach.

Wet resin diamond polishing pads are designed for wet polishing of concrete floors. Made with high quality diamonds and high quality resin to ensure high quality polish, fast polishing, high gloss, nice clarity and long life.

Diameter is 3" (76mm) and thickness 10.5mm. Available grits 30# 50# 100# 200# 400#. Unique formula ceramic bond make the tool much more aggressive than resin polishing pads, remove scratches of metal grinding pads efficiently. Chamfer edge pattern with wide slots easy to let slurry come out during polishing. Widely used as transitional polishing pads between metal grinding pads and resin polishing pads to reduce some steps of resin polishing pads to save labor and cost. Rubber between resin and velcro to absorb vibration and at the same time to increase adhesiveness between velcro and diamond work surface. Velcro back for quick change. Different velcro color for different grits. Mainly used on floor grinders for concrete floor polishing.

Z-LION 16K wet resin diamond polishing pad is one of the most popular wet resin concrete floor polishing pads in the market. The special features of this polishing pad are as follows:

High quality diamond and high quality resin are used in the formula to ensure fast polishing and high gloss. Though the pad was designed or wet polishing, most of our customers prefer to run it dry and it works same well in most applications. Hot press time and temperature are set during production to ensure quality consistent. This wet polishing pad wears evenly, a set of 12pcs covers 8000-15000 square feet. Rubber layer in correct hardness, to absorb vibration and at the same time to increase adhesiveness between velcro and resin. No velcro peeling off so the pad can be used out. With this polishing pad we can get nice clarity and high gloss in wet application and most dry application.

Dry resin diamond polishing pads are designed for dry polishing of concrete floors. Made from high quality diamonds and high temperature resistant white resin to ensure high quality dry polish without resin transfer. Nice clarity and high gloss.

Diameter is 3"(83mm) and thickness 10.5mm. Available grits 50# 100# 200# 400# 800# 1500# 3000#. Popular pie shape with wide slots easy to let debris come out. Made with high temperature resistant white resin, works excellent in no water application. Unique formula ensure high quality polish, no resin transfer, nice clarity. Rubber between resin and velcro to absorb vibration. Velcro back for quick change. Different velcro color for different grits. Can be used on traditional planetary floor grinders and power trowel polishing machines.

Z-LION 16AD dry resin diamond polishing pad is one of the most popular dry resin concrete floor polishing pads in the market. The special features of this polishing pad are as follows:

High quality diamond and high heat resistance white resin are used in the formula to ensure fast polishing and high gloss, no resin transfer in dry application. New technology instead of traditional hot pressing is used to produce this pad, easier to control the quality and ensure quality consistent. This dry polishing pad wears evenly, a set of 12pcs covers 8000-15000 square feet. Rubber layer in correct hardness to absorb vibration and increase adhesiveness between velcro and resin. High temperature resistant glue is used to adhesive the velcro, no velcro peeling off even under high temperature in dry polishing application, so the pad can be used out. With this polishing pad we can get nice clarity and high gloss when it gets to 800 grit. Works same well both on planetary grinders and in power trowel polishing system.

Z-LION sintered metal diamond polishing pad is a one mold sintered grinding and polishing tool for concrete floor polishing. Mainly used on power trowel floor polishing machines. Coarse grits can be used for rough surface grinding. But the tool is mainly used as transitional polishing pad between segmented metal grinding tools and resin polishing pads, works excellently on removing scratches of segmented metal tools.

Diameter is 3"(76mm) and diamond thickness 4mm.

One mold sintered, like resin tools when we change the mold we get a different pattern. OEM/ODM is a good option for this tool, everyone can have your own unique design. The tool can be designed with clockwise or counterclockwise direction or no direction. Rubber layer in the middle to absorb the vibration and increase adhesiveness of velcro. Come with velcro back for quick change. Different paint and velcro color for different grits. Mainly used on power trowel floor polishing machines. Works in wet application. Mainly used as transitional polishing pads between segmented metal tools and resin pads, works excellent on removing scratches of segmented metal tools. Coarse grits can be used for rough surface grinding as well. Soft, medium and hard bond are available for different hardness of concrete floors. Extra soft, super soft, extra hard and super hard are also available if needed. Available grits: 30#, 50#, 70#, 100#, 120#, 200#, 400#,800# The tool can be painted in different colors as per grit number or as per bond hardness.

Trapezoid PCD grinding discs are the most aggressive concrete floor grinding tools. Mainly used for removing thick epoxy coatings on the surface of concrete floors. Two 1/4 quarter round PCD and one rectangle wear bar on trapezoid is an excellent choice when removing heavy coatings. Clockwise and counterclockwise rotational direction are interchangeable.

Typical trapezoid shape matches with most floor grinders. 3-M6 threaded holes, 3-D9mm through holes, Diamatic/Blastrac 6 holes are all available. Two of 1/4 quarter round PCDs and a wear bar which is usually in 30grit. PCD can be 1/2 round as well and wear segment can be in the shape of rectangle, round, arrow etc. Mainly used for removing floor coatings like paint, glue, resin, epoxy etc. Especially good for removing thick/heavy epoxy coatings. Clockwise and counterclockwise rotational direction are interchangeable, fit all the major planetary floor grinders. Besides typical Trapezoid,HTC, Husqvarna, Lavina, Terrco, Werkmaster, Scanmaskin, Contec connections are all available.

Z-LION Trapezoid PCD coating removal tools work excellent on removing all kinds of coatings on concrete surface and get the floor prepared for grinding. The special features of the tool are as follows: High quality diamond is used in the matrix of wear bar and high quality PCDs make the tool with good grinding capacity. PCDs and wear bar are professionally welded onto the trapezoid metal base, extend the lifetime of the tool. PCDs are slightly higher than the wear bar which acts as stabilizer and depth guide ensure the PCD to remove coatings effectively and efficiently without damaging the concrete. PCDs are direction-specific,operator need to check the direction of rotation of the grinder heads and mount left or right hand PCDs to match. We mark left or right hand direction on the tool or paint different color for left and right hand for operator to pick the correct tool quickly.

Z-LION double rhombus wing plate diamond grinding tools are used on HTC floor grinder for concrete floor surface preparation and restoration. Mount to HTC floor grinding machines via the special wing plate which is known as HTC EZ-change in concrete polishing industry.

Come with special wing back plate to fit HTC floor grinders. 2 rhombus segments which is bigger than double round.Segment shape can be changed to rectangle, round, coffin, arrow etc. Single segment or double segments are both available. The tool is for HTC floor grinders and mainly used to removal thin coatings,lippages on concrete floors, and for shaping and rough grinding of concrete floors to get it prepared for polishing. Soft, medium and hard bond are available for different hardness of concrete floors. Extra soft, super soft, extra hard and super hard are also available if needed. Available grits: 6#,16#,30#, 50#, 70#, 100#, 120#, 200#, 400# The tool can be painted in different colors as per grit numbers or as per bond hardness.

Z-LION double rhombus wing plate diamond grinding tools are for HTC floor grinder which is one of the most popular concrete floor grinding machines in concrete polishing industry. The special features of the tool are as follows: High quality diamond is used in the matrix to make the tool with good grinding/cutting capacity. Diamond segments are hot-pressed and professionally welded onto the wing back plate. Density of segments is reasonable and professional welding help to extend the lifetime of the tool. Segments are super aggressive and with longlife. 2 rhombus even bigger than the double round D25x12.5mm segments will cover 8000-20000 square feet. Besides the matrix, segment shape, segment numbers as well as the layout of segments will affect cutting capacity and life of the tool as well. We have a wide range of segment shapes and layout options to help customers to find out the most suitable tool quickly. Special Wing plate fits HTC grinders perfectly. A rubber hammer is enough when you need to remove the tool from the tool holder.

Z-LION double button wedge-in diamond grinding plates are used on Lavina floor grinders for concrete floor surface preparation and restoration. Mount to Lavina floor grinding machines via the wedge-in backing plate. The plate can come with 3-M6 holes and be used as typical trapezoids as well in some applications.

Come with special wedge-in backing plate to fit Lavina floor grinders. 2 Round segments diameter 25mm and thickness 12.5mm.Segment shape can be changed to rectangle, rhombus, coffin, arrow etc. Single segment or double segments are both available. The tool is for Lavina floor grinders and mainly used to removal thin coatings,lippages on concrete floors, and for shaping and rough grinding of concrete floors to get it prepared for polishing. Soft, medium and hard bond are available for different hardness of concrete floors. Extra soft, super soft, extra hard and super hard are also available if needed. Available grits: 6#,16#,30#, 50#, 70#, 100#, 120#, 200#, 400# The tool can be painted in different colors as per grit numbers or as per bond hardness.

Z-LION double button wedge-in diamond grinding tools are for Lavina floor grinder which is one of the most popular concrete floor grinding machines in the market. The special features of the tool are as follows: High quality diamond is used in the matrix to make the tool with good grinding/cutting capacity. Diamond segments are hot-pressed and professionally welded onto the wing back plate. Density of segments is reasonable and professional welding help to extend the lifetime of the tool. Segments are super aggressive and with longlife. 2 round segments D25x12.5mm will cover 8000-20000 square feet. Besides the matrix, segment shape, segment numbers as well as the layout of segments will affect cutting capacity and life of the tool as well. We have a wide range of segment shapes and layout options to help customers to find out the most suitable tool quickly. Special wedge backing plate fits Lavina grinders perfectly. A rubber hammer is enough when you need to remove the tool from the tool holder. The plate can come with 3-M6 holes and be used as typical trapezoids as well in some applications.

Ceramic transitional polishing pads are mainly used after metal grinding pads and before resin polishing pads to remove coarse scratches of metal grinding pads and get concrete floor prepared for polishing by resin polishing pads. Transitional polishing pads are usually much more aggressive than resin polishing pads.

Diameter is 3" (76mm) and thickness 10.5mm. Available grits 30# 50# 100# 200# 400#. Unique formula ceramic bond make the tool much more aggressive than resin polishing pads, remove scratches of metal grinding pads efficiently. Chamfer edge pattern with wide slots easy to let slurry come out during polishing. Widely used as transitional polishing pads between metal grinding pads and resin polishing pads to reduce some steps of resin polishing pads to save labor and cost. Rubber between resin and velcro to absorb vibration and at the same time to increase adhesiveness between velcro and diamond work surface. Velcro back for quick change. Different velcro color for different grits. Mainly used on floor grinders for concrete floor polishing.

Z-LION 16CT ceramic transitional diamond polishing pads also called diamond hybrid polishing pads or semimetal polishing pads. It is an ideal transition tool between metal grinding pads and resin polishing pads in concrete floor polishing industry. The special features of our transitional polishing pads are as follows: High quality diamond and ceramic materials are used in the formula to make the pad aggressive enough to remove deep scratches left behind by coarse grit metal bond grinding pads efficiently. Hot press time and temperature are set during production to ensure quality consistent. The first grit after metal bond polishing pads wears faster, fine grit connects to resin polishing pads lasts longer, average life of a set of 12pcs around 5000-12000 square feet. Rubber layer in correct hardness, to absorb vibration and to increase adhesiveness between velcro and ceramic working surface. No velcro peeling off so the pad can be used out. With this transitional polishing pad used between metal pads and resin pads, we can reduce several steps of resin pads, save time, save labor and cost.

Diamond sponge polishing pads are designed for cleaning and polishing concrete floors. Impregnate diamonds into nylon fiber and hold the diamonds in place by unique technology, making the pad with high performance and long life. Can be used on floor grinders for concrete floor restoration or on scrubbers for janitorial maintenance,polishing and burnishing.

Popular sizes are 17", 21" and 27". Fiber thickness 25mm. Available grits 200# 400# 800# 1500# 3000# Sponge polishing pads are special floor polishing pads with diamonds impregnated in nylon fiber base. Nylon fiber in mesh structure good for heat dissipation, so the pad will not overheat and dye the floor when run in dry. With mesh structure we can also dry the pad quickly after wet use so the pad will not decay and split. When for concrete floor restoration,sponge polishing pads can be used to clean the floor or to polish the floor as substitute of fine grit resin polishing pads. Sponge pads are also widely used for daily janitorial maintenance.

Z-LION Diamond sponge polishing pad also called diamond soft fiber polishing pad or diamond impregnated polishing pad. This big diameter pad is ideal for daily janitorial maintenance. The special features of our sponge polishing pads are as follows: High quality diamonds are used in the formula and then impregnated in nylon fiber. With unique technology diamonds can be held in nylon fiber in place. It can remove scratches and stains on concrete floors more efficiently and last longer. Special 25mm thick nylon fiber in mesh structure, soft but with strong grip. High quality fiber base ensure diamond work surface can be used out. Mesh structure fiber can be attached to grinder or scrubber directly without velcro back. Can be used in wet or dry applications. When in wet application, need to wash and dry it after use. When in dry application, don't run it for a long time. Diameter from 3" to 21", 24" 25" 27"and 36" are all available.

Flexible wet resin polishing pads are widely used in concrete floor polishing industry. Floor grinders work efficiently because of their big footprint，but they can not reach to the edges and corners of the floor. Hand-held grinders will solve this problem. Flexible resin polishing pads are used on hand-held grinders to polish the edges and corners.

Available size from 2" to 6", thickness 3mm. Available grits 50# 100# 200# 400# 800# 1500# 3000#. 5" and 6"pads are mainly used on hand-held grinders for polishing edges and corners of concrete floors where floor grinders can not reach.3" and 4" pads can be used on light weight floor grinders for fine polish of concrete floors. 2" mini pads can be glued to big diameter rubber or nylon fiber to be buffing pad like Vortex pads then be attached to scrubbers, floor grinders or power trowel floor polishing machines for concrete floor polishing. No rubber between resin and velcro ensure the flexibility of the pad. Velcro back for quick change. Different velcro color for different grits.

Bush hammer on wedge-in plate for Lavina floor grinder are widely used for pulverizing the surface of concrete floor to get aggregate exposure, for texturing and grinding concrete floors to get decorative finish or anti-slip finish or for coating removal. It is an ultra aggressive tool for concrete floor preparation.

Bush hammer roller with 2 rows(30 teeth) or 3 rows (45 teeth) of carbide tips held by metal frame which bolted to Lavina wedge-in plate. Conical carbide tips which welded on the roller keep rotating and hitting on the concrete floor to create bush-hammered surface. Bush hammer is a multifunction tool. Can be used to pulverize the surface of concrete floor to get aggregate exposure; or to create rough hammered surface on used concrete floor for holding new layer of concrete or coatings like epoxy; for texturing and grinding concrete floors to create decorative finish like naturally weathered rock or anti-slip finish; or for coating removal,etc.

Z-LION bush hammer with wedge-in plate for Lavina floor grinder for texturing and grinding concrete floors to get hammered profile. The special features of this tool are as follows: High quality carbide tips (teeth) are used to make the hammer, with long service life. Carbide tips are professional welded onto the roller, extend lifetime of the tool. The inside of the roller is made of bearing, sleeve, spring washer and filled with grease. The roller always rolls smoothly. Wax is used to seal the roller to prevent dust going into the bearing and stop the roller. Frame which to hold the roller bolted to Lavina wedge-in plate via 4 stout screws, no break under repeated hitting. The number and layout of teeth on the roller can be changed. 2 rows of 30 teeth or 3 rows of 45 teeth are both available. And roller can be replaced when carbide tips are used out. Special wedge-in backing plate fits Lavina grinders perfectly. Sliding in and out from the tool holder easily.

Z-LION 10inch diamond grinding wheel is designed to be fitted on 250mm single head floor grinders like Blastrac. Mainly used for concrete floor surface preparation and restoration such as leveling and smoothing concrete floors, coating removal, rough surface grinding etc.

Diameter of the 10inch diamond grinding wheel is 250mm which brings the maximum output of 250mm working area. 20pcs of rectangular segments, segment size 40x10x10mm. Besides the center hole, there are 8 countersink holes. With these holes, the grinding wheel can be mounted to most single head floor grinding machines conveniently. Blue color for hard bond segments for soft concrete; Green color for medium bond segments for medium hard concrete; Red color for soft bond segments for hard concrete. Available grits: 6#,16#,30#, 50#, 70#, 100#, 120#, 200#, 400#. Mainly used on 250mm single head floor grinders like Blastrac, EDCO, SPE, MK, etc. for coating removal, lippage removal, or for the initial steps in concrete polishing procedures.

Z-LION 10inch diamond grinding wheel is designed to be fitted on single head floor grinding machines for concrete floor grinding. The special features of the tool are as follows: High quality diamond is used in the matrix of segments to make the tool with good cutting/grinding capacity. Diamond segments are hot-pressed and professionally welded onto the metal base. Density of segments is reasonable and balance of the tool is good so extend the lifetime of the tool. Diamond segments can be changed to arrow shape, rhombic shape etc. And number of segments can be 10, 16, 20 or made as per demand. When there are fewer segments the grinding wheel is more aggressive and cuts faster; when there are more segments it works more smoothly and lasts longer. You can always get the right tool for your job. Besides the center hole and countersink holes, more holes can be drilled onto the metal base to make the grinding wheel fit for more floor grinding machines.