Welcome to My Personal Artistic Hell

Bucky: just rip the bandaid off, Sam. 

Sam: I think we’re into each other. like. in love and all that shit. 

For those of you that don’t know what 4c hair is, 4c hair is a hair texture type that contains coils to small and tight that the hair appears to be more puffy rather than curly ( like to photo below ) this is in NO WAY to be confused with curly hair. there is a drastic difference.

As a black artist that primarily draws characters with 4c hair, I’ve been asked many times to do a tutorial on 4c hair so here we go~

before we get into 4c hair, lets take a moment to fully understand it by talking about hair texture in a general sense first

let’s take a look at this example of straight hair vs curly hair ( 1 type straight hair vs 3 type curly hair )

If you take a moment to compare the two you’ll notice straight hair is flat, it has no texture. Straight hair perfectly hangs down similar to liquid-like silk. It’s lack of curl pattern is the reason as to why it hangs perfectly flat.

curly hair on the other hand doesn’t lie down flat and silky like straight hair, It’s more thick. Curly hair in it’s raw and unstyled state has a trapezoid like shape this is because the sides of the hair spread more outward.

So why is this? Why is straight hair flat and curly hair thick?

the answer to that question is a thing called piling up. When it comes to hair texture, the shape of the hair strands aren’t the only thing that matters, its how the strands coexist with each other, Curly hair strands coexist by piling up on top each other.

moisture also effects hair texture too, different hair types absorbs moisture differently, thus the thickness of each hair type is different. 

…..soooo, how does this all relate to how to draw 4c hair?? 

Well let’s take a look at the drawing below. Notice how the arrows go outward more as the hair texture gets curlier. As we’ve already discussed, this is because hair piles up, The curlier the hair texture, the more it piles up on each other, the bigger it gets, the more outward the arrows go.

Out of any hair texture, 4C hair has the most curls. Because of this, the hair piles up on each other so much that it doesn’t lie down flat like straight hair, nor does it make a trapezoid like shape like curly hair, it instead becomes more cloud like.❤️

This is what you need to take into account when it comes to drawing 4C hair.

Think of it as piling up a bunch of cotton balls on each other. The most cotton on top of top to lead to a bigger patch of  cotton. this is 4c hair.

How to not draw 4c hair:

Garnet fanart. Let’s talk about Garnet Fanart. I notice a trend that when artists draw Garnet from Steven universe, her hair texture is usually changed to 3 type curly like texture. This subtle form of White washing has confused me because this is inaccurate. 

Garnet’s hair is in the shape of a cube. Though 3 type hair piles up on each other, it isn’t curly nor thick enough for their hair to stay in the shape of a cube. Curly hair lies down more than 4c hair. So garnet’s hair being in the shape of a cube is a dead giveaway that it is 4C. Why do you think hairstyles like flat tops are usually seen on black men with 4c hair? It’s because, the 4c hair texture is thick and strong enough to stay in whatever shape you put it in.

please, if you’re drawing a character with 4c hair, avoid drawing it like curly 3 type hair, this is very anti-black and texturist.

So, how do you draw 4c hair?

honestly, its the most easy thing in the world

i wanna clarify that blobby looking 4c drawings ( like the one on the top left ) can work depending on how cartoony your art style is.

Another thing that I want to greatly clarify when it comes to drawing 4C hair is, YOU. DONT. NEED. TO. DRAW. EVERY. HAIR. STRAND!…..like, seriously. I’ve gotten many messages about how 4C hair is hard to draw, and it’s always left me confused; but then I find out that the same people that have trouble drawing 4C hair, attempt to draw every single strand of hair. This is unnecessarily time consuming because it’s merely impossible to get every single detail down, especially when you have a simple cartoon style. 4C hair does not require much effort, all you’re doing is drawing lumps. It’s that simple, nothing more nor nothing less.

The reason why I greatly advise all of you to avoid drawing every single hair strand is because in real life, when you look at a 4C textured Afro, your eyes don’t pick up on each individual hair strand like straight or curly hair. 4C hair, appears to be more undefined and cloud like, so attempting to draw each and every individual strand is unnecessary and will most likely end up looking inaccurate.

IT EVEN HIGHLIGHTS THE ULNA BONE  

Arm view: Red = Deltoids (all three heads are in one color) Blue = Latissimus Dorsi Green = Biceps Brachii Yellow = Triceps Brachii

Forearm: Red = One of the wrist flexors Blue = Brachioradialis

Back view, left side: Red = Deltoids (all three heads are in one color) Blue = Latissimus Dorsi Green = Infraspinatus, Teres Minor, Teres Major Yellow = Trapezius (all groups one color)

1. How you can hear them all trying not to laugh

2. The shear amount of friends he had to get together to make this

@fuckyeahgratsu​ request for @divinion1990​

AO3 | FF.Net

A Matter of Trust

Summary: Natsu and Gray would always fight, both with and without magic, their opposing natures and personalities almost demanded it, but behind all the insults and blows there was a friendship built on trust and respect.

“What kind of loser doesn’t know how to swim?” Natsu mocked Gray as he ran, trying to stay out of the ice mage’s reach.

“So what if I don’t know how to swim?” Gray yelled as he punched the stupid grin off Natsu’s face. “At least I know how not to be an asshole.”

“You’re a loser on that one too,” Natsu shouted in annoyance, not wanting to admit the punch had hurt. He kicked Gray’s legs out from under him quickly and pinned him to the ground.

Gray maneuvered out from under him and reversed their positions. “Who’s the loser now?” Gray grinned triumphantly at the fuming Fire Dragon Slayer.

“Ow, you bastard!” Gray screamed as his skin began to blister where he’d been touching Natsu, causing him to let go. “Gramps said no magic in the guild!”

As someone who’s reported alt-right harassment and rhetoric on various social media sites and been told “there’s nothing here that violates our TOS,” seeing what RPGnet is doing is a welcome breath of fresh air.

step one build that shit in minecraft

step two take a fuckin screenshot n then trace that shit

step three what the fuck is up!

1. Definition

Texturing is a technique that involves adding local shading and details on surfaces to better represent the material of an object. This technique is of course closely linked to shading in general. This is usually applied after defining a global shading.

From left to right :

Lineart

Global shading

Completed sprite

One of the big differences between global and local shading is homogeneity. The very principle of global shading is to give a sufficiently contrasting effect between the shaded and lit areas to bring out volume and depth. Conversely, a texture must be as homogeneous as possible. It must be able to be applied on large, uniform surfaces, without making it look bad.

2. Applying a texture

A texture being homogeneous in terms of its luminosity/contrast, if it is applied to an object without taking into account the global shading, we will lose any effect of volume and depth.

A texture applied to a sphere without shading. Only the deformation of the texture can give us a clue on the shape of the object, but it is still difficult to discern. Homogeneous contrast When applying a texture to an object, shadows must also be taken into account. It is therefore important to maintain a uniform contrast between colours. A dark line separating a light zone from a dark zone should not keep the same colour between these two zones.

The color of the line will be lighter on the lighter side and darker on the darker side to preserve its contrast with the background. In the same way it is possible to apply a texture or pattern on a shaded object, by proceeding to a simple color shifting in our palette.

Combination of a texture (left) and an object that is not textured but shaded (middle).

3. Local shading

Since shading is used to highlight the bumps, there are generally two possible cases:

A groove

A bump

Each of these cases can be more or less accentuated by playing on the colors, the intensity of shadows and lights.

On the upper line, troughs ranging from the weakest to the strongest bumps. On the second line, these are bumps that stand out. The mastery of these light bumps is very important, it is the basis of the textures, and will make it possible to manage all the simple cases, such as wood or matte plastic. Example of application on a simple object:

4. Reflections

The application of a reflection is done in a simple way, by applying diagonal strips of light of varying thicknesses, and following a few rules.

A trough or bump will create an offset at the reflection level (proportional to the height change). As for the shadows, there is no absolute, depending on the palette or the material represented, it is possible to lighten or not the area at the reflection level. It is also important not to have parallel light bands on faces that are not oriented in the same direction, as on this cube:

Concrete example of the application of a gold texture on our drawers:

Or, added reflections on our previous crate:

5. Dithering and granularity

Dithering consists in creating a new false color from a checkerboard or other regular pattern of two colors close enough to give an illusion of mixing. The closer the colours are, the stronger the illusion will be. The more the colours are contrasted, the stronger the granularity effect will be.

Dithering is basically used to obtain fake intermediate shades on limited palettes, but it is also very useful for making complex and rough textures.

Example of complex dithering separating 3 colors over a wide area.

The nature of the pattern totally changes the roughness aspect. Example of the application of a sandy rock on our drawers:

Or add grain to our crate:

6. The art of destruction

The more complex a texture is, the more it will combine fundamental techniques such as bumpiness, reflections or granularity. However, some materials need to go further, by cutting, slash or breaking the base support.

Cuts It works much like bump, but on a much finer surface. We are subject to the same rules, of which here is a summary image:

From the finest to the most pronounced, on the first line of the cuts, and on the second of the bumps. A concrete example on our crate:

Exercises

Since nothing beats practice to learn, here is a series of examples from the simplest to the most complicated.

For each exercise resolved, post your results.

Mastering tools

Add a strong bump on the text of this image, except the ‘x’ which must be a groove (the center must be dug more strongly than the rest of the ‘x’):

Palette:

Add reflections on the image obtained between the two red lines shown below:

Now cut and break the letter ‘e’ as well as possible.

Add grain to the letter ‘l’.

Finalize a sprite

Texturize/colorize this sprite:

Palette:

Add reflections on the inside of the doors to give the impression that there are windows.

Add damage (cuts etc) on the right side of the wardrobe.

Make a variant of this cabinet by redoing it in gold using the palette of the gold drawers example in the tutorial. Palette:

Do the same with the sandy rock. Palette:

Sample solutions

Here are some solutions by a talented friend :

Gif process