Vappo

Steam Crave Dual series Mesh Deck is designed for Titan RDTA to build dual mesh coils for smooth flavor.

Here is the new Pandora MTL RTA by Yachtvape. The Pandora MTL RTA features the type of innovation we have all been craving. Starting from the top the Pandora has a well styled 510 drip tip with a threaded ultem tip, we understand there will be other colour options for this and the tank tube at a later date. To fill the Pandora there is a removable conical screw cap which reveals two nice size kidney holes, a tank extension tube can also be added to increase the capacity. The bell chamber is where the magic starts to happen, this is the snuggest of fits with the deck which produces flavour in abundance for your vaping pleasure. The deck is a two post system making the coil installation a very straight forward process. Beneath the coil the airflow innovation begins, there is a rotating barrel with five holes to select the airflow of either 1.0, 1.2, 1.4, 1.6 or 1.8mm to dial in the airflow. Lastly there is a more traditional airflow control ring around the base of the Pandora featuring five holes and an adjustable slit. All in all there are over 30 different settings to fine tune the airflow which we believe makes the Pandora jump out of the box for us.

Specification

Height (inc drip tip and 510)  49.7mm

Width 22mm

Material ss304

Capacity 2ML

Package Includes

1x Pandora MTL RTA

1x Tank Extension Tube

1x Spare Parts Bag

2x Cotton

2x Pre-made Coils (1.3Ohm)

1x Screwdriver

Vapefly Kriemhild 200W TFT Screen Box Kit comes with three output mode: VW/TC/Curve, these multiple modes will satisfy different vaping experience and taste. It is powered by dual 18650/20700/21700 batteries and supported 200W maximum output, fast charging with 5V 3A, also 5V 2A available. The TFT color screen will display data clearly. Moreover, it has three mesh coils for easy replacement, including 0.2ohm single mesh coil, 0.2ohm dual mesh coil and 0.15ohm Triple mesh coil. Customized your own vaping experience from Kriemhild Kit.

Features

Tank size: 26.0×55.5mm(with drip tip) Mod size: Size: 38.6×47.5×91.0mm Tank Capacity: 5ml Drip tip: 810 Coil Type: Single & Triple Material: SS+Derlin+Glass+Ni80 mesh coil Output power：5W-200W Resistance range：0.02ohm-3.0ohm Voltage range：6.4V～8.4V Charge: Type-C charge port Coil: Ni 80 trip mesh mesh coil (0.15ohm: 50-80W)        Ni 80 single mesh coil (0.2ohm: 50-80W) Thread: 510

It includes

1 x Kriemhild Tank

1 x Triple mesh coil(0.15ohm)

1 x Single mesh coil(0.2ohm, pre-installed)

1 x Glass tube

7 x O-rings

1 x Filling port silicon

1 x Pole silicon

2 x 18650 battery adapters

2 x Type-C charging silicon

1 x Waring card

1 x Type-C charging cable

The SMOK Fetch Pro Kit integrates the function of pod device and MOD kit in a portable unit. Powered by an external 18650 battery, the SMOK Fetch Pro Kit fires up to a maximum output of 80W. The colorful 0.96-inch screen shows all vaping data precisely. Above the display, you will find an air inlet bar. The SMOK Fetch Pro Pod is also air-adjustable at the bottom. The SMOK Fetch Pro has high compatibility with RPM coils and RGC coils. You are capable of choosing different RPM Pod and RGC Pod as you like. The standard 510 drip tip at the top brings flavorful taste to the vapers too. The SMOK Fetch Pro features large side fire key for easy and fast firing speed.

Parameters

Size: 93.5 x 46 x 22mm Battery: 1 x 18650 battery (not included) Standby Current: <200uA Drip Tip: 510 Capacity:  4.3ml/4.0ml Coil Compatible: RPM Coil/RGC Coil Input Voltage: 3.3V-4.2V Output Voltage: 0.5V-4.0V Resistance Range: 0.10-2.5ohm Output Wattage: 5W-80W Charger Output: 5V/2A Output Mode: Watt Charging Voltage: 5V Charging Port: Type-C Charging

It includes

1 x Fetch Pro Device

1 x Fetch Pro RPM Pod (RPM Mesh 0.4ohm Coil Pre-installed) (4.3ml)

1 x Fetch Pro RGC Pod (RGC Conical Mesh 0.17ohm Coil Powered by nexMesh Pre-installed) (4.0ml)

1 x Type-C Cable

Horizon Falcon 2 II Sub Ohm Tanks comes with pre-installed bulb glass tube that has a capacity of carrying e-juice up to 5.5ml. In addition to 5.5ml it also comes with a 3.4ml straight glass tube for straight look. The Horizon Falcon II tank uses the incredible Sector Mesh Coil that has no-thread design using a fan-woven mesh heating wire which is specially altered to maximize the air flow. The smoke is pushed upwards using a bottom up heating system of coil to enable the vapor compression that makes the vapor and the flavor dense and strong. Falcon 2 tank has a very handy push top fill design. Just push the top cap to the side and inject your e-juice in to the large filling holes that are leak proof. It has adjustable air flow slots on the bottom that can be adjusted by rotating the ring.

Features

25mm Base Diameter

28mm Glass Diameter

3.4mL Juice Capacity

5.2mL Maximum Juice Capacity - Bulb Glass Edition

Superior Stainless Steel Construction

Pyrex Glass Reinforcement

Push-to-Slide Top-Fill System - Button Lock

Bottom Airflow Control - Dual Slotted Design

Horizon Sector Mesh Coil Technology

0.14ohm Sector Mesh Coil - rated for 70-75W

Conical Tapered Mesh Coil Design - Compresses Flavor

Plug 'n' Play Coil Installation

Sloped Resin Widebore Drip Tip

Gold-Plated 510 Connection

Available in Rose Gold, Rainbow, Carbon Black, Stainless Steel, Blue

What’s Included

1-Horizon Falcon 2 Tank

1-Sector Mesh Coil 0.14ohm

1-3.4ML Straight Glass Tube

Here is the latest Augvape Intake Sub Ohm Tank, a a collaboration with Mike Vapes.It’s a 25mm Tank with huge juice capacity up to 5ml. Augvape developed an innovative coil called Clapton Mesh, which provides better flavor and longer lifespan than regular mesh coil, and the flavor from this Clapton Mesh is RDA level. What's more, the airflow is from top to the bottom and direct to the coil which makes it leak proof like intake RTA. Wood pulp cotton combination also makes the flavor come out the first puff.

Main Features:

1. Innovative clapton mesh for better flavor and longer lifespan

2. Come with Intake Clapton Mesh 0.2Ω & Intake Mesh 0.15Ω coils

3. 5ml big juice capacity, easy top refill & leak-proof design

4. 25mm diameter, top to bottom airflow system

​Packing list:

1 x Intake Subohm Tank

1 x Bubble Glass 5ml

1 x 0.15Ω Regular Mesh Coil

2 x 0.2Ω Clapton Mesh Coil

2 x O-rings

1 x User Manual

1 x Warranty Card

Check out the newest Voopoo Drag X 80W Pod System Kit,this kit is made of metal and leather, so Drag X is not only soft, but also has advantages of anti scratch, anti perspiration and anti fingerprint. It is powered by single 18650 battery. With the new GENE.TT Chip, Drag X features fast ignition (only takes 0.001s) and high burst. GENE.TT Chip also offers intelligent functions such as PUSS and SCORE ranking mode. In addition, the SCORE ranking mode helps you continuously unlock the new level from "IRON" to "KING" according to the cloud size of each suction. It comes with 5-80W power range to fit your needs and the 80W max power will enable you to make bigger flavorful clouds. Drag X is designed with the innovative infinite airflow system that supports the regulation of any size of airway. Most importantly, you can enjoy the most comfortable experience through this system no matter which kind of coil or different parameters are set! As for the pod, it can hold 4.5ml big e-juice capacity and adopt a wide range of coils, including RBA. 510 adapters and other new technologies are also be added to this pod. Drag X is equipped with 0.15ohm and 0.3ohm PnP coil and it is compatible with all PnP coils.

Check out the newest THC Tauren Max RDTA,with the advanced structure of dual coils and 2ml/4.5ml e-liquid capacity! The ingenious Y-shape build deck will only make the coil installation easier. Moreover, the 3D honeycomb airflow system is effective to provide you smoother airflow and big clouds. You can also enjoy a variety of airflow options plus the dual AFC ring, which to satisfy your special requirements. In general, the Tauren Max RDTA is a strong vaping device for your amazing vaping.

Features:

Dual coil max RDTA Originality & Dual-Y-Shape build deck Triple sides with 3D holes honeycomb airflow Dual AFC ring with multiple airflow options 2 & 4.5ml bulk capacity Various refill system without oil leaking

It comes with

1 x MAX RDTA

1 x 4.5ml Pyrex Glass

1x Allen Wrench

1x Slotted Screwdriver

1 x Spare Parts Pack

1 x User Manual

The Smoant Knight 80W Pod System Kit is a delicate compact multifunctional RBA pod mod device. Smoant Knight 80 kit uses a single replaceable 18650 battery to provide vape support and can transmit power output up to 80W. Besides, the Smoant Knight 80 pod kit is equipped with an advanced AI smart ANT-chip and buck boost chip that supports atomizer memory function, can automatically adjust the output according to the coil and provide a constant output to provide the first-class flavor. It's worth noting the Knight pod kit compatible with all Smoant Pasito coils. It is also compatible with new design RBA that supports single and dual coil build. Compatible with a total of six types of coils. Displaying relevant vaping data on the 0.96 inch OLED Screen, the Smoant Knight 80 Kit relays important vaping info back to the user. As for the Knight Pods, it can store up to 4ml of e-juice, adopts a leak-proof system, independent air-flow control system, new child lock system. Compact, powerful performance, pure flavor, excellent vapor experience.

Features: 1. Replaceable single 18650 battery 2. Advanced AI smart ANT-chip and buck boost chip 3. Max out 80W power can satisfy the demand of your cloud 4. Clear and minimalism 0.96 inch OLED screen 5. 4ml cartridge capacity 6. New child lock system and many protections 7. Compatible with 6 types of coils (Knight 80 Coils & RBA and all Smoant Pasito coils including the Pasito RBA) 8. Knight 80 RBA supports single and dual coil build 9. Independent air-flow control system

Here is the newest VOOPOO X217 TC box mod,great craftsmanship and quality, gives you enjoyable senses. The mod requires two 21700 batteries self-developed with the power capacity up to 7500mAh, it is long lasting and durable. What's more, it also compatible with 18650/20700 battery. On the side of battery covers, it is designed with a "V"shaped colorful breathing LED light, which realizes a stylish vape experience. The breathing LED light starts to flicker?the longer you inhale, the faster the frequency of light flashing will be. With its powerful max output, you will enjoy intense vaping clouds. Voopoo X217 utilizes 21 bits of high-end geek customized chip, the fastest speed only 0.01 second. The mod comes with 1.3inch TFT color screen, flattening the UI interface with the features of clearness and conciseness and the style of user-defined interface. The surface of the X217 adopts the the skill of the sand blast, which realizes a smooth and delicate sense of touch. Main Feature:

Omega Coil 18650 Stabilized Wood Mod is the second mech mod of Ultroner, which adopts high purity brass to reduce the internal resistance of stabilizewood and to improve electrical conductivity. Omega Coil used single 18650 battery. Moreover, stablewood is applied on its pipe casing with a waistline style and a carved design for a more comfortable grip.

Features:

Here comes the long-awaited Wotofo Profile Unity mesh RTA,a collaborative success by Wotofo, MrJustRight1 and The Vapor Chronicles.It all started with the passion and suggestions from customers across the world.Now this is the answer to all those voices for a Profile mesh RTA.

New Drip Tip Design Comes to Profile.

It’s made of fairly thick resin for comfy touch on lips.

You’ve got to try it and enjoy airy draws with dissipated heat.

It’ll be the start for you to rethink how drip tip matters.

Tongue & Groove Top Cap Is Brought In.

Conversations about leakage are going to stop.

Just slide the cap tongue into the tank groove and turn clockwise to close.

Refilling and sealing get way simpler.

When Bigger Capacity Is Up To You.

If the fun is running short, simply make it long.

3.5ml --> 5ml

43% Bigger.

Soft. Stable. Smooth.

Adjustable airflow.

From tight to loose.

In your control.

It’s The Enemy Of Burnt Taste.

Get ready for a whole new juice flow experience.

You’ll be impressed at such non-stop flow and rapid e-liquid feeding.

Bi-Level juice feeding ports. Ingenious design.

What's old is new again.

It’s optimized from the Profile RDA build deck.

Easy to wick, easy to build on.

And it’s powered by nexMESH OFRF, the triple density mesh coil.

It’s Engineered For Flavor Success.

It has a deck-chamber linkage system.

The deck follows the chamber always,

S2 Squonk Box Mod-Mass Mods x Augvape

A collaboration between Mass Mods and Augvape who have partnered to offer you the best squonking experience you can buy. The power you expect from any Mass Mods device, without having to make a huge outlay. CHARACTERISTICS

Detachable individual doorBottle: 8 ml soft siliconeBattery: 1x 18650 (NOT INCLUDED)Materials: Plastic body and anodized aluminum doors for optimum protection against wear.

Mosfet mounted in low resistance PCBNOTE: Mechanical mod with protections, the wiring and electronic board are not covered and may have contact with the liquid if you do not have proper maintenance of the device.

THE KIT CONTAINS