#workshopcleaning

Explore Delta Solutions' range of industrial vacuum cleaners designed for heavy-duty applications. Enhance efficiency with our reliable cleaning solutions.

Since a large variety of manufacturing operations are carried out in the workshop, many oils such as mechanical oils, cutting fluid, fatty oils and vegetable oils are left on the floor. If they are not cleaned for a long time, it is easy to form a heavy coat of grease on the ground. For proper cleaning, please refer to the following methods:

1.        If there is less oil on the floor of the workshop, you can use mop and bucket to scrub directly. Dip the mop into a bucket containing the ground oil cleaning agent and water and then scrub.

2.        If the oil on the floor is not treated in time, a strong degreaser should be used, because the oil may have penetrated into the ground. When the oil is heavy, it can be cleaned with the stock solution.

3.        If the workshop area is too large, you can use automatic cleaning equipment such as floor scrubber. There are currently three types of floor scrubbers: walk-behind floor scrubbers, ride-on floor scrubbers and autonomous floor scrubbers. The cleaning principle of the three floor scrubbers is the same. In the first step, scrub the floor with a brush or pad. In the second step, rinse the ground with fresh water. In the third step, pump the waste water back to the floor scrubber recovery tank. Finally, dry the ground with a squeegee.