#triphase

Próxima sesión el 1 de febrero. No sería un regalo genial? Pues con nuestra #tarjetaregalo puedes hacerlo. #scolalaarena #Gijón #scolaperfumes #depilación #triphase #depilclub #regalosparatodos #reyesmagos #lamagiadelanavidad (en Scola- La Arena)

RX01 SEMI-AUTO COIL WINDING MACHINE 相片擁有者 JK machine 透過 Flickr： RX01 SEMI-AUTO COIL WINDING MACHINE This machine can be made multi-type, multi-layer winding, is able to wind 1-10 wires at the same time, can automatically groove Automatic tap, equipped with two square shaft winding used alternately, its adaptable wire diameter ranges from ¢25 to ¢180 mm. Starting winding point, line width, winding speed, slow start, slow stop, row line direction, parking on ends, Automatic homing, automatic starting, automatic slot, auto tap, etc can be set automatically. Ribbon cable on the slider is equipped with 1-10 of pay-off arm, high and low Angle can be arbitrarily adjusted; Equipped with 1-20 ¢210 mm * 320 mm steel barrels; Equipped with a complete set of 16 mm * 16 mm * 625 mm square shaft; High efficiency and easy operation; OEM available, same quality much lower price.

CZ02 SLOT INSULATION MACHINE 相片擁有者 JK machine 透過 Flickr： Description: CZ02 Slot insulation machine(single slot shape) Stator stack height: 10mm-100mm Max. Stator O.D.: φ200mm Stator I.D.range: φ17mm-φ90mm Height of edge folded: 2mm-5mm Max. thickness of insulation paper: 0.15mm-0.3mm Paper feeding length: 12mm-40mm Tact time: 0.4-0.5 s/slot Air pressure: / Power supply: 380v/ 50Hz Three-phase four-wire Power: 0.75Kw Dimension (L*W*H): 960mm *1100mm * 900mm Weight:≈250kg

QX02 COIL INSERTING MACHINE 相片擁有者 JK machine 透過 Flickr： The coil inserting prcoess is the most important process in the manufacture of a stator for an electric motor. The coil insertion tool is the key part of coil inserting machine. In order to keep the coil inserting smoothly, we design and manufacture various kinds of insertion tools with absolutely high quality, well resistent. This machine conducts gang control to inserting main shaft, wedge paper feeding shaft and wedge magazine indexing shaft through PLC control system assembly, cooperating with intelligent human-machine communication system. It conducts enamelled wires insertion, slot wedge cutting and moulding, also the wedges insertion into the stator slots when coil insertion, which completes the single/multi phase coil insertion and slot wedge insertion at one step. The machine has the advantages of even wire push torque, stable moulding of slot wedge, high production efficiency, low cost, easy and reliable use and maintenance. Adopts AC servo motor system as source of active force, alternating frequency motor as wedge punch power; Adopts Chinese/English HMI operating control, and has function of breakdowns self-diagnosis; Adopts stepper motor for wedge paper feeding, could each slot set by slot skipping, wedge self-decides overall length feeding, cutting off, punching to shaping, free set of wedge inserting slot and wedge numbers; Tact time≤25s/phase(auxiliary time not included); Has special control switch for debugging; Has pre-deceleration function for wedge punching and coil inserting; Free set of push up height and stop time at the HMI; Industrial PLC: MITSUBISHI from Japan; Servo motor and controller: MITSUBISHI from Japan; Sensor elements: OMRON from Japan.

ZX03 MIDDLE FORMING MACHINE 相片擁有者 JK machine 透過 Flickr： Description: ZX03 Middle forming machine (with cuff) Stator stack height: 15m-160mm Stator I.D.: 30-120mm Max. Stator O.D.: 160mm Displacement of oil pump: 30F Power supply: 380v/ 50Hz Three-phase four-wire Power: 3.75Kw Dimension(L*W*H): 630mm*1200mm * 2400mm Weight:≈1200Kg

BX08 DOUBLE SIDE LACING MACHINE 相片擁有者 JK machine 透過 Flickr： Loading stator vertically; equipped with pressing, automatic feeding, automatic cutting device, etc,; overhang winding adpots twin needle lacing by servo system simultaneously; needle transpositioning, hookin and stator indexing are controlled by servo system; spindle adopts frequency speed control; slot by slot lacing, interval lacing, and fancy lacing could be achieved by setting in human-machine interface; characterized by compact appearance, fast speed, low noise; simple peration and easy tooling change. Equipped with pressing, automatic feeding, automatic cutting device . Overhang winding adpots twin needle lacing by servo system simultaneously Spindle adopts frequency speed control; slot by slot lacing, interval lacing, and fancy lacing could be achieved by setting in human-machine interface . High efficiency and easy operation OEM available, same quality much lower price Characterized by compact appearance, fast speed, low noise; simple peration and easy tooling change.

ZX05 FINAL FORMING MACHINE 相片擁有者 JK machine 透過 Flickr： Description: ZX05 Final forming machine (with no cuff) Stator stack height: 15m-160mm Stator I.D.: 30-130mm Max. Stator O.D.: 200mm Displacement of oil pump: 20F Power supply: 380v/ 50Hz Three-phase four-wire Power: 1.5Kw Dimension (L*W*H): 630mm*1300mm*2000mm Weight:≈1000Kg