#traeger problems

In comparison to a charcoal or gas grills, Traeger Grills (Traeger Smoker) are relatively high tech. They are relying upon several components that operate in unison to make a set-it and forget-it BBQ encounter. Consider it: an automatic auger provides the ideal number of pellets into the fire to set up the desired cooking temperature. Subsequently, detectors and an electronic control board speak back and forth to maintain that equilibrium accurately.

However, the cornerstone of the advantage is technologies, and now and again, you will encounter difficulties. The majority of the problems are simple to diagnose and fix with only small troubleshooting. They place it at 250°F and watch as the electronic screen climbs to 280°F for a few moments or briefly drops to 215°F. 

Considering that the Traeger Digital Elite Controller is found on models such as the Lil Tex Elite, Renegade Elite and Traeger Century 22 (also referred to as the Costco Traeger) are designed to keep +/20°, it has to be broken. Right? Not automatically.

Are People Abnormal Swings Standard?

Before pulling out your hair trying to Heal you, Traeger, stop and consider if there is a problem. Frequently what users perceive as an issue is the way the Traeger Grill was made to get the job done. 

Whether Traeger--or some other pellet grill manufacturer --says their grill can preserve a specific temperature range, the amount given is the average for a whole cook. Occasionally it will get nearer to the stable temperature, and sometimes it'll drift farther from it. Following is a straightforward method of looking at it: If within the span of a three-hour cook your Traeger retains its temperature over 10°F half the time but just 30°F another half of the moment, it is still within the specified range of +/-20°. Bear in mind, and it's a type of the whole cook, not only one data point.

When assessing temperature swings along with your Traeger, there is one more factor to consider: the ailments. When Traeger says, a grill may maintain its temperature within a specific range (like +/-20°), which claim is generally accompanied by an asterisk. Consequently, if you are cooking a complete load on a windy October day where the exterior temperature is hovering around 60°F, it is reasonable to the Traeger's temperature to drift beyond the +/-20°.

What Pellets Are You Currently Using

Believe it or not, the pellets would be the principal source of temperature changes in almost any pellet grill. Not many smoker pellets will be the same. Some create more ashes than others. Whenever there's a lot of ash floating around from the grill, the RTD probe, which measures the grill's temperature and squeezes it to the control, can not get a precise reading. This could result in false readings on the electronic screen, or the power may become confused, presuming it requires to nourish more/fewer pellets into the fire than it does.

Traeger advises that you utilize their pellets, in part because these are the only pellets that they could guarantee are excellent quality. Though your Traeger should operate perfectly well on any caliber BBQ pellet, keep in mind that the very first query any service representative will ask during is in case you are using Traeger pellets.

Even when you're utilizing quality pellets, then make sure to regularly wash excess ash from the fire pot and grill inside using a Shop-Vac or home vacuum to maintain your Traeger doing its very best. While it's suggested that you wash your Traeger each 2-3 utilizes, it is a fantastic idea to do this after a very long all-day cook where ash is most very likely to accumulate.

Have a look at the Fire Pot

The fire kettle in your own Traeger Grill is uniquely designed to optimize airflow. There are a particular number of holes which are just sized and strategically positioned to feed sufficient oxygen into the flame to keep the fire burning in the desired temperature. More than any other area on a pellet grill, the flame kettle withstands the many duress. 

Consistent exposure to elevated temperatures and also the continuous heating and cooling causes it to be vulnerable to corrosion and clogging. As time passes, perforations and openings may grow from the steel, enabling enhanced and unwanted airflow into the flame, making it more challenging for your grill to regulate its cooking temperature correctly.

The flame kettle is the most commonly replaced part on a Traeger and can be easily swapped for a different ordinary steel flame kettle or updated with a stainless steel Traeger fire kettle, which is stronger and should last the life span of your barbecue.

Like the flame pot, the heat diffuser and drip pan onto your own Traeger are made from regular steel. And like the flame pot, the heat diffuser regularly suffers damaging heat. The drip pan, however, receives a double dose of rust causers--it absorbs radiant warmth from the and can be subjected to moisture in the kind of drippings. 

If part starts to destroy, then your Traeger could grow hot spots. Much like all the flame kettle, the heat diffuser and drip pan can also be available in stainless steel--or you may buy all three components as a Premium Package.

Examine the RTD Probe

If everything else appears to be in sequence --you are using high pellets, the flame pot is in great shape --you might have to check the RTD probe. The RTD acts as a thermostat and also measures the internal temperature of the grill and then feeds the data back to the controller board. Much like in your residence, if the thermostat is weak, your restaurant will not be able to correctly regulate its temperature.

The easiest way to check the RTD would be to utilize a remote thermometer such as the iGrill. While the RTD and thermometer readings might not line up precisely (they likely assess the temperature at several periods ), they need to be shut and should dovetail throughout a twenty five minute evaluation cook.

In case you don't have a remote thermometer or do not wish to experience the procedure of analyzing your RTD, do not worry. Through the process of elimination, you can zero in on it because a likely culprit--whether it is not the pellets, the grill is clean, along with your fire kettle and lover are in excellent working order, it is most likely the RTD. And, as it is quite cheap, Traeger is generally great about sending a replacement RTD while your barbecue is under guarantee. Even if your barbecue is outside of guarantee, the RTD signifies a speedy and reasonably priced fix.

Another frequent Traeger Grill difficulty is that the fire is heading out mid-cook, and it is usually rooted in precisely the very same problems that produce strange temperature swings, together with the top trigger being bad pellets which make excessive ash. If a lot of ash builds up from the flame pot throughout a cook, then it may cut off airflow and suffocate the flame, snuffing it out.

Similarly, a bad RTD that is relaying inaccurate readings may get the control to ditch too many pellets, preventing it from having the ability to keep a fire.

In the end, since the induction fan helps feed oxygen into the fires, if it is not working, that might cause the flame to go out.

Pellets Are Not Being Fed into the Fire Pot

Wood pellets are fed into the fire kettle from the hopper with a rotating auger that is powered by a motor. After turning in your own Traeger, you need to hear it start to move (note: it might take a few seconds). You may even look down to an empty hopper and visit a part of the auger. When it is not moving, it might be a faulty engine.

If the drill is not moving, but the engine is friendly, there might be a pellet jam preventing the auger out of spinning. Clearing the jam necessitates eliminating the hopper and performing some light mechanical function, however, there are loads of incremental videos which simplify the procedure and reveal precisely how to take action.

If the auger is bringing pellets into the fire kettle, but they are not light, there is a fantastic possibility the igniter is poor. It is possible to check if it is working by running the grill. The suggestion of the igniter goes to the fire pot and ought to shine once the grill is switched on.

If the igniter is functioning correctly, but the pellets are not light, then the fan could be to blame. With no essential airflow or oxygen, the flame might not be mild. Again, listen to the noise of the fan humming to make sure it is working.

Traeger Error Codes

While not each Traeger issue will create an error code, Traeger Grills are made to understand when there are specific issues.