A rubber-based adhesive form is called a contact adhesive, also known as "contact cement." Rubbers, including polychloroprene, could be found in both natural and synthetic contact adhesives.

When materials over which a contact adhesive has been placed establish contact, unlike removable adhesives, the bonding is permanent.

Features of contact adhesives

Liquid contact adhesives are accessible in water or solvent form. Although many contact adhesives sold as solvents are hazardous and combustible, they have the benefits of rapid drying and bonding.

The contact adhesive needs to be placed on the two surfaces that need to be joined for it to function. Therefore, the contact adhesive cannot be used to connect the two surfaces immediately. However, the bonding should wait until the contact glue has dried. However, once the contact glue has dried, which can take up to 24 hours in some cases, the bonding procedure is often fairly quick.

The two surfaces can be joined once the contact adhesive has dried. After the adhesive has cured, the bonding procedure can typically be completed in 30 minutes (and occasionally, even in less time). Since the bonding is permanent and repositioning is practically impossible, a high level of accuracy is needed. Due to this, only one or two of the contact adhesive-bonded surfaces can be separated from one another.

 Where do people utilize contact adhesives?

Rust Converter by Technical Beacons

Rust Conversion coatings are formulated from chemicals that alter different types of surfaces and create a superficial layer over them to act as the protective shield. The chemical coating helps in improving paint adhesion and preventing corrosion to undercut the coatings. 

Technical Beacons supply and manufacture commercial and industrial cleaning products that provide a safe and effective solution for the long life of products.

Our value for money solutions backed by exceptional customer services delivers quality solutions and not just quick fixes.

Weicon Smoke Detector Test Spray | Technical Beacons

WEICON Smoke Detector Test Spray is ideal for a secure checking of the correct functioning of optical resp. photoelectrical smoke detectors and smoke switches.

The spray helps to carry out a functional test without agglutinating the electronics. In this way it is guaranteed that the detector or switch work without disruption. The spray does not contain any solid substances and evaporates without leaving residues. Thus the functionality of the devices is in no way affected.

SOME PROPERTIES OF SMOKE DETECTOR TEST SPRAY

This spray stimulates smoke and helps in testing the performance of smoke detector test spray for commercial and residential purposes. It is an aerosol spray and you can use it by standing on the floor.

Dry Film MoS2 Lubricant is a next generation lubricant with unique properties and advanced technology. This lubricant offers excellent protection against wear and corrosion, reduces power consumption, increases efficiency, and extends the lifetime of mechanical parts. It maximizes efficiency and reduce energy costs.

DEVCON Plastic Steel Putty (A) – SET 0.5 KG

Plastic Steel® is the original metal-filled epoxy putty used for hundreds of routine maintenance, production, and tooling applications. Patch and repair areas where welding or brazing would be undesirable or impossible.

KEY FEATURES

Bonds to most metals, concrete and some plastics

Cures at room temperature and forms a tough durable metallic mass that can be drilled, tapped, machined or painted