#tech support.

Windows errors are the common problem with computers. It is very easy to fix the error, if your computer is working. You can browse the web, search for more details about the error, and find its resolution. However, if the error occurs during the installation of Windows, then it becomes difficult to fix it. Additionally, you will also face issues while finding out the exact causes of the problem. You might have received the error “0x0000000A” during ‘Windows XP’ installation. Read the blog to know how to fix the problem, if the error occurs during the installation process:

Causes of the Error

‘Windows XP’ might show you the error during the installation due to multiple reasons. Following are the few common causes for the same:

1. You might face the error, if you are using a faulty hardware. 2. Windows will show you the error, if your device drivers are incompatible. 3. Wrong disk fragmentation might also lead to the problem.

Blue screen errors are very critical, and these errors may cause serious PC problems. When you face the blue screen error, then the entire program running on the system stops, and you will not be able to use your computer anymore. You need to fix the blue screen error very carefully because a minor mistake while troubleshooting leads to an irreparable damage. If you are a new user and your technical knowledge is not strong, then you can call computer support executive to get instant tech help.

PC Support Tips to Fix the Error Code

If you receive “0x0000000A" error message during the installation of Windows XP, then the problem is with the hardware components installed on your computer. 

If your hardware is compatible, then you need to check other hardware issues with your system. It requires advance troubleshooting steps that might also involve changing the ‘CMOS’ settings, or replacement of your computer hardware. Incorrect changes to the ‘CMOS’ settings can lead to the serious computer problems. If you don't have adequate technical knowledge, then you can call computer support firms for online technical support to fix such a complex issue.

Troubleshoot Method 1: Specify the Hardware Abstraction Layer (HAL)

Read the below guidelines for the same.

During the ‘Windows XP’ installation startup, you need to press the ‘F5’ key on your keyboard when the “Setup is inspecting your system hardware configuration” message appears. When prompted, you have to make sure that you will specify the correct computer type and HAL (Hardware Abstraction Layer). Mostly, the computer uses a single processor. If your system also has a single processor, then simply select the ‘Standard PC HAL’ computer type from the menu. Now restart your computer and reinstall the ‘Windows XP’ again. Now, check whether the problem gets resolved or not. If not, then follow the second troubleshooting method to fix the problem.

Troubleshoot Method 2: Turn Off Features in ‘CMOS’ Settings

You must ‘Turn off’ all the below mention features in the ‘CMOS’ settings of your system to find the cause of the problem:

1. All the caching, including L2, internal/external, ‘BIOS’ and write back caching on disk controllers. 2. Any ‘BIOS-based’ virus protection features 3. Plug and Play. 4. All shadowing feature.

Now, reinstall the ‘Windows XP’ again and check whether the problem got fixed or not. If it gets fixed, then try to find out which above mentioned feature is causing the error. To check this, you need to re-enable these features one by one at a time and restart your computer after enabling each feature.

Conclusion