You know in the solids control system, there are so many pipe lines. If you want to learn more, please view below links:

1). https://solidscontrolstock.blogspot.com/2018/09/offshore-drilling-solids-control.html

2). https://solidscontrolstock.blogspot.com/2018/09/offshore-drilling-solids-control_28.html

Do you know how to match the right size of solids control equipment? Please open the following link and read carefully!

Solids control system is used to store, configure, circulate and purify drilling fluid. To make sure the drilling fluid's good performance, different drilling rigs has different solids control equipment. According to SY/T6223-2005 "Use and Maintenance of Drilling Fluid Cleaning Device", the 4000-7000 meters' drilling rig solids control equipment is as below: 

http://solidscontrolstock.blogspot.com/2018/09/solids-control-systems-composition.html

Kosun Decanter Centrifuge is a device used in separating suspension of solids for drilling purpose. It has been designed for Oilfields and Industrial purposes that are seeking an environment friendly solution. Its speed ranges from 0n to 3900 RPM, generating centrifugal forces reach up to 3000G.

The main advantages of Kosun Decanter Centrifuge:

1- It has a continuous dewatering in an enclosed unit, which reduces factory nuisances and cost of deodorizing premises.

2- The machines are cleaned automatically.

3- All mechanical safety mechanisms constitute part of the standard main equipment.

4- It is highly suitable for all sludge types, even the most difficult ones.

5- It is highly automatic and self-dependent machine with easy maintenance.

6- It has a very wide application range. The decanter centrifuge can conduct an effective separation as good as filtering centrifuge and can finish the separation despite failed filtering centrifuge.

7- Decanter Centrifuge can also be used for liquid clarification. It helps separation of lighter solids from heavier liquids.

8-It is usable in both high and low temperatures.

9-  It has a Great Adaptability. It is capable of producing force even greater than the gravity, precisely 14,000 times greater than the gravity.

10- It grades the particles based on the size.

Kosun,as Decanter Centrifuge Manufacturer, establishment in 1992, has been the major supplier of solids control system products in the field of China’s oil & gas drilling equipment, the earliest and only one decanter centrifuge manufacturer in five provinces in Northwest China, and the producer of the first-generation high-frequency drilling fluid shale shaker in China. (Editor:Kosun Lily.Wang)

Kosun- Solid Control System Company

Tel.: +86 29 87304914/86-13891934239

Email:[email protected]

Contact person: Lily Wang

Company Video:https://www.youtube.com/watch?v=X7mtwj1ktGg

Online consulting:

http://www.kosun.com

http://www.kosuneco.com

The particular solids control system might remove the large solid contaminants in the drilling mud to minimize the solids content to ensure that to protect the transferring send that used to transfer the particular mud back the machine for reusing. GN just simply finished one set mud solids control system along with VFD decanter centrifuge intended for mining project in Southeast Asia.

This system is a two stages separation design product; the equipment configuration is as beneath: 1 . Shale shaker unit GNZS594E-HB used for coarse strong particle separation. This shale shaker unit could also be utilized as a high G pressure drying shaker with variable G force up to eight. 4-panel screen makes a more substantial area for drying often the drilling mud. 2 . VFD design decanter centrifuge system used for fine solids separating. The first one unit centrifuge operates at a middle speed to eliminate most of the solids to reduce often the gravity. The following second device VFD control centrifuge might run at a high speed to get rid of the ultra fine solid waste to make the drilling mud clean. 3. Screw pump prepared to transfer the dirt to the centrifuge. Horizontally set up at the flank of the reservoir, it helps to tank leading more space for operation mobility. 4. Mud cleaner reservoir used as sand pitfall and active mud hard drive. This system is to remove the sound particles in the drilling soil to make the drilling fluids using again. After the solids being taken off, the fluids could be piped back for reuse as well as the pump would be also guarded as there are less solids dust. Mud solids control strategy is very common product and alternative that GN provides. For this reason, GN could provide parting system used for oil going, no dig drilling task and some other industrial sturdy and liquid phase separating. For more information, welcome send you email or call devoid of any hesitate.

Related Posts

Drilling Waste cuttings Decanter Centrifuge

GN Equips the Solids Control Equipment with Own Fabricated Control Panel

Solids control system is for...