Right Angle Gearbox is used to transmit the Rotary motion in 90 degrees. This SMD Gearbox uses a Bevel Gearset of which the axis driven is perpendicular to the axis of the driving gear.

SMD Right Angle Gearbox – SRAS Series size 40 is the precision Gearbox available in the market with nominal output torque ranging from 44 Nm to 1370 Nm with the total reduction ratio available from 1:1 to 1:200. The Right Angle Gearhead is attached with a single-stage planetary Gearbox to achieve reduction with maximum output torque. SMD Can provide different types of output such as Shaft type, Collar, Clamp type and Hollow Bore type. The housing is made up of aluminium and the shaft and gear material are made up of SCM440 alloy steel.

The Sizes available for Right Angle Reducer are 40, 60, 90, 120, 150, 180,220. If the reduction is needed upto 1:1 or 1:2, it can be provided with a bevel gearhead, if the requirement for a particular application is above 1:2 a Planetary gearset is attached at the input section and with the combination of both large reduction ratios with high output torque can be achieved.

 For More Information, Visit :-

Website - https://www.smdgearbox.com/right-angle-gearbox

SMD Right Angle Gearbox uses straight bevel gears to transmit torque in 90 degrees. This Gearboxes are generally used where there is space constraint and is designed with a aim to save customers time on design stage and maintenance stage. SMD also offers various customization in Right Angle Reducer as per customer specific applications. SMD Right Angle Gearbox has diversified appearance and maximum reduction can be achieved by combination with planetary gear reducer. This gearboxes are maintenance free due to synthetic lubrication provided in the Gearbox and multi directional mounting is possible duo to tapping holes are provided on the five faces of the Gearhead.

 For More Customization, Contact us on :-

Mail – [email protected]

Phone No – 7030669818

Website – www.smdgearbox.com

A Right Angle Gearbox is used to transmit Rotary Motion in 90 degree. This Series can be customized to get three directional outputs I.e. Single Output Shaft, Two Directional Output Shaft and Three Directional Output Shaft. This particular Gearbox comes with dual shaft end where the reduced output can be achieved in the Rotary Motion form. The Application can be directly coupled with the output shaft for further transmission of Motion.

 For More Information,

Website -  https://www.smdgearbox.com/right-angle-gearbox

SMD Right Angle Gearbox transmits the Motion in 90 degree and comes with Planetary Gear Set attached which has total reduction ratio ranging from 1:4 to 1:200.It comes with the shaft output and can be modified according to the customer needs.

 For More Information visit,

Website - https://www.smdgearbox.com/right-angle-gearbox

SMD has introduced new Rack and Pinion Series with Gearbox where Rack Module is 1.5 and its length is 100 mm. The Pinion is coupled to SMD Right Angle Gearbox SS42 hence through which input is provided. The Right Angle Reducer can have ratios between 1:1 and 1:100. The nominal output torque of this Gearbox is 13.7 Nm. This Gearbox is a light Weight which weighs only 1 kg. The Rack is coated with black oxide coating to prevent rusting. The Rack is Surface finished in 2 ways either Ground or Milled.

For More Technical Information :-

Visit - https://www.smdgearbox.com/right-angle-gearbox

Reference Link - https://dribbble.com/shots/17558217-SMD-Gearbox-Solutions-with-Rack-Pinion

Mail ID – [email protected]