Saw Horses
Ok so I have a small history in wood working. I don’t know how to make a lot, but I do know how to make saw horses. I made these saw horses and they have come in quite handy. I enjoy wood working and you can’t really get by with out these.
They aren’t too hard to make, and if you need some help no worries. Here you go:
Cost:- about $12 each
Time:- 10 – 15 minutes each with air nailer
Skill Level:- beginner
Get two 12′- 2 x 4s and one 10′ – 2 x 4
Build 36″ wide…….34″ high ……legs spaced 33″ across the front and 21″ across the ends, lower brace at 22″ from top
Using 3″ screws, assemble the 3 top boards to make the beam
Attach the legs using a framing square to square the legs to the beam
Attach the bottom rails last
(all boards are 2 x 4s)
Now you’ll notice in my picture, that I did not add the bottom rail. I did this because of the limited space I have right now. if you have any questions feel free to message me here!!! Thank you
They Should look like this:
