If you are looking for a cost-effective way in order to keep your garage looking fresh and presentable all the time, you have to invest on high quality garage floor paint. As a matter of fact, using this kind of coating will not only make your garage look more aesthetically pleasing, but will also make the concrete on your floor more durable as well.
The main reason why these paints are used is their ability to resist oil accumulation, grease and dirt among many other contaminants. It also protects the floors from wear and tear.
Epoxy is a copolymer, which means it is formed from two different chemicals. In this case, the chemicals are referred to as the resin and the hardener.
With this said, it will be a good idea for you to plan out the over-all look that you want to achieve by updating your garage. As a rule of thumb, pick out a garage floor paint that comes from the darker side of the color wheel, so as to make sure that it will be much easier for you to clean your garage.
You will also need to clean it using some mild acid and then scrub it thoroughly. These are usually referred to as acid etching.
After you have immaculately cleaned your garage floor, you are ready to get this project started. It is best to apply the epoxy coating on a day when the weather is between 50 and 80 degrees Fahrenheit and when no rain is in the forecast, as moisture, heat and cold affect the paints ability to bond properly. Applying the paint outside of these conditions can cause bubbling and peeling.
Industrial strength garage floor paint does not only give a refreshed look to a surface, but also gives an additional layer of protection to the floor. This means that you will be able to keep your floor smooth and crack and bump-free for years without having to go out of your way in maintaining it.
After doing these, the garage floor should then be left overnight to dry. During epoxy paint application, It is important to ensure a consistent application. You should also make sure that the humidity is at the accepted levels to prevent the coating from blistering and discoloring. Two to three coats of the paint are usually adequate. If you do a proper install of epoxy paints, you a assured of years of service and if you maintain the surface regularly you can further its lifespan.