FRK – Optical Phaser
"Characteristics: The phaser has 2 channels, A and B, that can be used:
in chains: Channels A and B are wired in series: the sound crosses channel A and then channel B. This mode makes it possible to reinforce the effect produced.
in parallel: Channels A and B are wired in parallel: The sound applied at the entrance of channel A crosses channel A and channel B. This mode allows you to bring stereo to a mono sound.
independently: Tracks A and B are used independently. The sound applied at the entrance of channel A crosses channel A, the sound applied at the entrance of channel B crosses channel B. This mode allows:
apply the effect to a stereo sound (e.g. channel A = left, channel B = right)
apply the effect on 2 different sounds, as if you had 2 distinct phasers (e.g. channel A = guitar, channel B = synthesizer)
2 oscillators make it possible to modulate the 2 channels, and to vary this modulation thanks to the façade potentiometers. The 2 channels can therefore be modulated independently or synchronized.
Details:
2 x 6.35mm mono jack inputs
2 x 6.35mm mono jack outputs
230Vac power supply, IEC cord provides
Internal power supply 30Vdc rail-to-rail
Aluminum sheet, local walnut boards"
cred: etsy.com/FRKElectronic
