#nightmareinsilver

Old paddock boots that I refurbished for the cosplay

This was my first time using leather paint and I have to say I am very pleased with the Angelus brand of leather paint. I have worn these in the rain and through puddles, and they have held up 100%.

After the boots were done, I started on the vest. I had an old black vest lying around the house that was sort of the shape and size I wanted. I don’t have a dress form, so I put it on myself, inside out, and used safety pins to make it the size I needed, then hand sewed around the safety pins. Not ideal, but it works.

I had a spare pair of black jeans, button down light blue shirt and a plain bow tie that I just ended up cel shading.

The only item that I really couldn’t figure out was the purple frock coat. Try as I might, I couldn’t find one to modify. So the coat was actually made by my friend Heather Long. I did alter the length after NYCC. 

With the clothes themselves all set, for the most part anyay, it was time to paint. This was my first time trying to recreate the art style of Borderlands, often referred to as cel shading. I have a few “art of Borderlands” style books that I poured over before I sat down to attempt this.

Other than the accessories and anything leather, I used the same materials and techniques for each article of clothing. Instead of describing each seprate piece, I’ll just explain what I did to achieve the overall look.

When you look at a Borderlands character on screen, it can be a bit overwhelming. So many colors, and so many nuances of each color. I did my best to visually sift through all that, and try to establish what I thought was the base color.

Once the base color was determined, I just added blotches, blobs, shading, low lights, highlights and other variations of the base color itself throughout each piece. I recommend keeping your fabric wrinkled and using those wrinkle as guidlenes for where the lines and shading would fall naturally.

Once all of that dried, I then went over different sections of the fabric with white and black lines. To get that crisp, almost comic book looking outline of each piece I used black sharpie, and white fabric pens as well as white fabric paint.

When I sat down to do the coat, I wanted something a little different than just cel shading. During a second playthrough of Tales from the Borderlands, I noticed Rhys and other characters had interesting logos and designs on the back of their jackets. I ended up putting a chessboard pattern on the back as a homage to the chess game between the 11th Doctor and Mr. Clever in the episode.

Great shot of the chess board and my Judd Nelson pose

The materials that I used for all of the clothing items were craft paints that I had around the house. Any brand works, but I prefer Americana paints. I then added an additive that you use to make the paint water proof and used various sized brushes. Dry brushes are also very useful if you have them.

Black sharpies of different sizes and any fabric markers are also very helpful. Heat setting is required to make the paint waterpfoof, so if you mess up before you add sharpies, you can wash the clothes and start over.

A few tips if you decide to undertake cel shading clothing: Until now I hadn’t noticed that there aren’t many thing in Borderlands that are true black. Due to the art style most things that appear black are in reality shades of grey, with a grey base colr. This makes it easier to add the lines, shading, and what not.  Looking back, I should have bought GREY clothes. It was a ton of work to make the pants look like they were a mixture of greys. And as a result of so many laers of paint, they are stiff, lost their stretch and feel an entire size smaller! So I would recommend grey fabric as a base for black clothing and buy a size larger.

The pants are so stiff that I think they will stand up on their own

This entire process was way more fun than I thought it would be and I’ve since become addicted to cel shading anything I can. I may or may not have started cel shading my guest room. 

After the clothing was finished, I started on some accessories and props. The first being the easiet – a wee little cybermite that I cel shaded. My cosplay of Mr. Clever always has a cybermite on my lapel, so I took one of my older ones and repainted it.

You can’t have a Borderlands character without some sort of weapon, so I painted a nerf gun that looks similar to the one that Clara Oswald holds in the episode.

I have never had to carry a gun for my Mr. Clever cosplay before so weapon checks are sort of new to me. I didn’t want to go through that at NYCC so I came up with a clever, no pun intended, way around it.

I took a photo of each side of the gun. Went to Staples and had them printed on heavy cardstock. Then I cut around the guns, glued them together between a piece of cardboard then added some black electical tape around the edges.  Viola. Instant weapons check approved gun that is lightweight, and also acts a fan when it gets hot. It was a huge hit at the con. A few security guards were like “ we have to check your…wait..is that flat?” And they proceeded to play with it. I highly recommend doing this!

Gun and its flat counterpart

I am holding the flat gun in this picture from NYCC

In the actual game, you can equip your characters with mods that give them certain abilities and bonuses. In the Pre-Sequel, you can play as a Dopplganger of Handsome Jack so I searched for some of his mods and found one in purple which seemed perfect. I made the mod with cardboard, covered it in craft foam, modge podge to set, and installed led lights. The first time I wore it I put it on my belt which didn’t work. It kept falling off. I eventually put it on my lapel and wore it like Jack does. Unfortunately, someone glomped on me at a con and broke it, so I recently had to remake it all over again.

No Borderlands costume would be complete without cel shading on yourself. This was a huge challenge for me for a few reasons. One, I’m visually impaired so doing line work like this was challenging. Two, I am highly allergic to so many materials and ingrediants that finding a make up brand that I could wear was a trial and error process that ended up with many break outs and rashes before I found the perfect combination.

I used mostly eye liner pencils and liquid eye liner to achieve the look. The Wet n Wild liquid eye liner lasts forever, and is actually difficult to remove, but that is not a bad thing as it stood up to the heat of a very crowded venue.

As for the cel shading itself, I relied on many refernce photos of various characters in the game. I started with the eyebrows first as that seemed to frame the face nicely and give me a nice mischvieous look. I then just outlined the bones of my face, adding some random lines here and there. It never looks the same way twice, but that’s ok. Playing with different angles, lines, shading etc is half the fun!

The only real challenge were my hands. The make up didn’t last that long on my hands so I had to touch it up throughout the con. I also eventually started to use band aids that I cel sahded to cover up a tattoo on my inner wrist.

Figuring what to do with my hair is an on going process that I still haven’t 100% mastered. I opted to not use a foam wig as I have over heating issues on a cool day let alone trying to wear one if it gets warmer. I have had adverse reactions to craft foam in the past, so I don’t want it touching my skin, and lastly, I think a wig AND a facial prosthetic would be too much for me. So I decided to just cel shade my hair.

This takes forever to do, and I’m still figuring out better techniques every time I wear it.

I have a really great brand of colored gel, called Mofajang which I apply with a baster brush that you would find in the kitchen gadgets aisle. I also use a clean mascara brush to add some finer lines here and there. Set with way more hair spray than I ever used in the 80’s and it becomes fairly waterproof.

I have learned that due to how hard the make up and hair color is to remove, I really need to wear this on the LAST day of a con. I made the mistake of wearing it on day one of Long Island Who one year, and spent hours scrubbing my skin and hair for the next day. Far better to just leave the con with a tad bit of left over cel shading. Which makes it very interesting when you stop at a roadside bathroom on the trip home.

With the entire costume done it was time to work on the actual cyberplanner appliance. 

Next time I make a variation of Clever, I will make this FIRST. Making these pieces is the bane of my existence – I love wearing them, hate making them.  It’s a long process.

I am allergic to latex, silocone, scuply, most clays, and so many other things that seem to be every cosplayers go-to. When I made my first cyber piece back in late 2013, I spent weeks trying to find a substance that would keep attached to my face all day without causing a rash. Like an alchemist in a fantasy novel, I submerged myself into creating the perfect concoction. It took 22 days to finish the final product.

I admit that I rushed a bit on the Borderlands one.  As a result, it doesn’t quite fit as well as my others, and is a bit heavier than I expected. I only added two working lights, instead of the usual four, to hopefully balance the piece out. It lasted through two full days of a con, despite the heat of a crowded venue, but I did end up tweaking it a bit after. Even with the tweaks, it still doesn’t fit as well as I would like. It is too heavy and brings down the entire left side of my face, making it difficult to keep my eye open at times. I really need to sit down and force myself to make a new one.

There are a few more things that I would like to add to this costume eventually. Like a belt of grenades, and maybe another gun. But aside from that, I am incredibly pleased with how this costume turned out. It is by far, my favorite Clever variation that I have done.

I hope this post gives you the inspiration to go off and cel shade something, and possibly even play some Borderlands!