#ncaseykeycustom

Finishing off this 3-1/4” deep x 1/8” kerf cut with a sawzall since the Makita X2 only cuts 2-9/16” deep. We clamped up four 3x10 PT arbor beams for batch cutting. All the beams and rafter tails dropped in fairly easily except the last one. There’s always that one beam or door or piece of crown that just gets you at the end of the day. 🤯 Check our story line for some video of this cut. 👍 And thank you for following along! . . Builder: @christnerbros Project: #NCaseyKeyCustom . . . #trim #finish #frame #custom #carpentry #woodworking #precision #carpenter #building #thisiscarpentry #sarasota #sarasotaflorida #srq #ninzanstudio #BIBBOA #PTArbor (at Casey Key)

Intracoastal waterway view from a bedroom window seat. Simple and clean white trim with a site built cubby storage bench (plywood and poplar). We’re in the finishing touch stage of this project for #christnerbros . . Builder: @christnerbros Project: #NCaseyKeyCustom . . . #trim #finish #frame #custom #carpentry #woodworking #precision #carpenter #building #thisiscarpentry #sarasota #sarasotaflorida #srq #ninzanstudio #BIBBOA (at Casey Key)

#NCaseyKeyCustom One of four 11x11 x 122” poplar columns. This one was fabricated to conceal a 4x4 structural steel post. We started with kerf cuts in order to relieve the cupping in the solid 1x12 poplar stock (thanks @michaelaustinfinecarpentry for this tip), then assembled the three lock mitered sides with 1x ribs, pocket screwed in for easier assembly and rigidity. The two column faces that were in contact with the steel post had to get rabbeted down to 1/4” thickness (we used a dado stack on the table saw and the RO125 sander with 40 grit Granat to hog out the rabbet). Lastly, we put PL Premium where necessary on the steel post and placed the 4th side into position. The edges were lock mitered so it came together very well. Overall, these four columns took longer than I anticipated, but they are built very well and I’m happy with the result. . . . #trim #finish #frame #custom #carpentry #woodworking #precision #carpenter #building #keepcraftalive #moderncraftsman #thisiscarpentry #sarasota #sarasotaflorida #srq #ninzanstudio (at Casey Key)

The guys finished up the beamed ceiling in the library today and did a great job!. This room gets a fantastic quality of light in the afternoon. It’s my favorite space in the entire house. In order to install the beams on the right side, we had to remove the in-place wall cabinets and then reinstall them at the end of the day. That’s how we roll. 👊 #NCaseyKeyCustom Builder: @christnerbros . . . #trim #finish #frame #custom #carpentry #woodworking #precision #carpenter #building #keepcraftalive #moderncraftsman #thisiscarpentry #sarasota #sarasotaflorida #srq #ninzanstudio (at Casey Key)

We finished up this white oak ceiling today at the @christnerbros #NCaseyKeyCustom job site. We were supplied prefinished cerused solid white oak click-together flooring boards (finished oak which was then white washed by the painters before install). We snapped chalk lines to find center, carefully laid out the coursing from center, scribed in the starter course and than went to town. The two darker pieces you see are 12” and 24” long boards which we ran out of in the white wash. No worries as the painters will hit them to blend in. I’m thinking a tiny cove molding to finish off this tray. #whiteoak #ceilings #coastal #gulffront #waterfront . . . #trim #finish #frame #custom #carpentry #woodworking #precision #carpenter #building #keepcraftalive #moderncraftsman #thisiscarpentry #sarasota #sarasotaflorida #srq #ninzanstudio (at Casey Key)

We started setting interior doors at the #NCaseyKeyCustom @christnerbros build today. The new 96” Stabila level is really shining for these tall doors. 📷 by @paper.and.wood . . . #trim #finish #frame #custom #carpentry #woodworking #precision #carpenter #building #keepcraftalive #moderncraftsman #thisiscarpentry #sarasota #sarasotaflorida #srq #ninzanstudio (at Casey Key)

Admiring the handsome stained cypress 1x8 T&G v-joint ceilings installed at the #NCaseyKeyCustom project by @christnerbros ....the framing sub did this work and man does it look good! 👍Drywall in progress and soon finish work will begin. #caseykey #finishcarpentry . . . #trim #finish #frame #custom #carpentry #woodworking #precision #carpenter #building #keepcraftalive #moderncraftsman #thisiscarpentry #sarasota #sarasotaflorida #srq #ninzanstudio #BARRIERISLANDBROTHERS (at Casey Key)

This past week we revisited this job site to install sliding panels into a frame that was missing parts from when we did the window and door package installation a few months ago. First photo shows the impressive super wide (20 feet?) Origin folding door at #NCaseyKeyCustom project by @christnerbros - Origin has a facility in Venice, FL which I’ve toured and was majorly impressed. Has anyone else installed or spec’d this product? This project is coming together quick...exterior trim and stucco is looking good! 👍 . . . #trim #finish #frame #custom #carpentry #woodworking #precision #carpenter #building #keepcraftalive #moderncraftsman #thisiscarpentry #sarasota #sarasotaflorida #srq #ninzanstudio