#m-diag

Notices about LAUNCH ICARSCAN Software installation

If you are installing Icarscan APP (ezdiag) and software in android system , please pay attention to the above points.

1. If you install Icarscan through scanning the QR code, please do not use the software like QQ or WeChat to scan the APP. Be sure to scan the installation with a web browser.

2. If you encounter the following error information, the software is not fully installed.

When the software download is complete, please do not click "installing” on the image as below. The system will be installed automatically. No human operation is required. If you click "installing”, the software will stop installing and it will not work properly.

The correct operation is shown below, and the system will be installed automatically. Don’t click "installing” with your hands.

If you click "installing”, the installation will stop.

Then you need to delete the APP and the software and reinstall it.

3. The methods to remove software are as follows:

<1> You have to connect your phone with computer

<2> Remove the cnlaunch folder from your phone. <3> Delete "EZdiag” APP. <4> Reinstall "EZdiag” APP and follow step 2 to download each car software and special function.

The most important point is software can install automatically. Cannot be clicked ” installing ” during software installation.

4.The language of your phone must correspond to your software language. If your phone’s language is different from the software language, it will cause the software fail to install.

5. If you encounter the following problem, it is also because the software is not installed. So there will be two versions of the software.

<1> You have to connect your phone with computer

<2> Remove the cnlaunch folder from your phone. <3> Delete "EZdiag” APP. <4> Reinstall "EZdiag” APP and follow step 2 to download each car software and special function.

6. You Can’t use two mobile phone bluetooth connection ICARSCAN at the same time: if a mobile phone bluetooth has been connected to ICARSCAN, another phone’s bluetooth will not be able to find the ICARSCAN.

LAUNCH ICARSCAN and Vpecker Easydiag , which one is a better OBD2 fault code reader ? One of our customer has tested both and make a comparison of Vpecker easydiag wifi diagnostic scanner and LAUNCH ICARSCAN OBD2 Scanner (Super LAUNCH X431 IDIAG Update Version) on Several Models.

Tested Tool: LAUNCH ICARSCAN ( Super LAUNCH X431 IDIAG )

VPECKER Easydiag

Tested Model Mazda 6 GH 2.0 Diesel 2008 Toyota Honda Scion

Tested Results

Functions To be Honest, LAUNCH X431 ICARSCAN OBD2 Code Reader have a lot more options on that car then vpecker, for example on engine it can only read few parameters and it can read and clear trouble codes thats it nothing else on engine not even dpf regeneration, idiag have more to offer for that car, I tested on few more cars. I think what is can do more with special functions is for Toyota, Honda, Scion. But since it is original OBD2 code reader and softwar price is ok for it. It can do newest cars till 2017, software support online update. It can free to select 5 brand car software with 3 special functions, if you want to extra software, price is 39USD per brand ( Cost $158 ) So for now vpecker OBD2 scanner is good because it can do multi-brand cars. But software for this scanner is older. I think it is good for older cars. Price is $159, the functions are close to Delphi Autocom, but it is limited to do special functions.

VPECKER Easydiag Special Function

LAUNCH ICARSCAN Special Funtion

I should say, each one have its own merits and demerits, but both Vpecker Easydiag and LAUNCH ICARSCAN are good work till now. It is a successful purchase from China.

LAUNCH X431 Easydiag 2.0 is basically the same OBD-II Bluetooth device - but the software supplied with it is different - and the way it's sold is different.

Easydiag 2.0 is without ANY vehicle/manufacturer specific diagnostics capability. As delivered it will do just OBD-II and some ABS diagnostics. Generic OBD-II. It won't read the 30 or so modules in your Cayenne.

To get it to do that - you have to purchase the software for Porsche - which includes ALL Porsche cars. As someone mentioned - that's about another $50, so you're in at about $100 to JUST read Porsche codes. If you want additional vehicle manufacturers (all your cars aren't Porsches) - each manufacturer will cost you another $50. So - the adaptor and 2 cars costs the same as the ICarScan one - which includes in the $158/price - the ability to choose 5 different car manufacturers and 3 special functions. ICARSCAN replacement LAUNCH X431 IDIAG , LAUNCH X431 Easydiag 2.0, LAUNCH M-DIAG Elite.

So that's why not-really and no. But sorta.

http://www.obd2tool.com/article-200-Is+ICARSCAN+same+or+old+version+of+LAUNCH+X431+Easydiag+.html

Which is best for you? Dunno. At the time I bought mine - the Launch tool (made by the company that writes the software running on the ICarScan ) wasn't readily available.

I only know one person who bought the one from Launch - and he seems happy with it. If you notice - there are versions of it available for around $80 that include 2 vehicle manufacturer's diagnostics. That's not a bad deal either.

I haven't worked with that tool, and haven't tried the software. I know from seeing it - the software has some differences from the ICarScan software. Dunno if the differences are simply cosmetic or significant. If someone wants to buy one and send it to me I could do a side by side comparison. That might be interesting.

Turn on your Android/IOS phone to find the main APP (EZdiag) and software APP ( US&Europe car, Asia1 car , China ), such as picture:

2.For example, you want to remove LAUNCH ICARSCAN US&Euro car, 2.1 Click this icon

, you will see:

2.2 Click OK , The page will turn to EZdiag APP

2.3 Turn off EZdiag APP and go to US&Euro car APP

 , Click login

2.4 The page will turn as this picture :

2.5 Finger Hold the screen for 3 to 5 seconds, the screen will turn to this page:

2.6 Click OK, in this way, You can delete all the US&Euro car of diagnostic software.

3.If you want to remove icarscan special features and Asian1 car models diagnostic software, 3.1 Click

3.2 Click OK , The page will turn to EZdiag APP

3.3 Turn off EZdiag APP and go to Asia1 APP

, Click login

3.4 The page will turn as this picture :

3.5 Finger Hold the screen for 3 to 5 seconds, the screen will turn to this page:

7. Click OK，in this way, You can delete all the Asia1 car of diagnostic software.

Launch ICarScan is a professional automotive diagnosis tool which manufactured by LAUNCH company. This is a specially designed auto code reader. ICarScan is a smart phone based vehicle OBD2 and full sysatem diagnostic tool designed with the professional technicians and DIY enthusiasts in mind. 1-1

There are 5 reasons for you to get Launch Icarscan :

1.Launch Icarscan Build-in bluetooth, easily connects with Android/IOS smart phone and tablet. The device is small and portable, yet powerful enough to rival its competitors.

2.Launch Icarscan replacement LAUNCH X431 IDIAG , LAUNCH X431 EZdiag  and LAUNCH M-Diag. Users have the option to purchase manufacturer spceific carline software based on their needs. LAUNCH ICARSCAN Support the generic OBD, CAN bus, and proprietary protocols of over 70 car manufacturers and 2, 500 car models. 8 free brand of software for your selection:5 car line choice(fullfunction software), 3 special function software choice. If you need more other softwares, pls buy it from APP store.

3.Launch Icarscan Support Special Functions like RESET SAS, RESET BMS, RESET BLEED, RESET BRAKE, RESET DPF, RESET ETS, RESET GEAR, IMMO & key programming, RESET INJEC, RESET OIL, RESET TPMS and so on.

4.Launch Icarscan Support Multi-Language: English, Chinese, Spanish, French, Russian. You can choice the language by yourself.

5.Launch Icarscan ( M-diag ) Update Software Online. You can free to download any 5 software with 3 special functions in any time.

Forget the password ? Please check the steps how to find it back as following : 1.Run Icarscan APP "EZdiag”

2.Click "Need Help?”at the bottom

3.Click " Forget Password?”

4.Enter in your email address which you registered before, click "OK”,you will receive the email for the new password

ICarScan User registration and login Enter your email address to apply for a user account

2.iCarScan device activation Enter the S/N and A/C (Activation Code) in the password envelope to activate the iCarScan device.

3.iCarScan device installation Step 1: Find the OBDII port, which is usually located underneath the dashboard; Step 2: Plug the iCarScan into the OBDII port of the vehicle and the LED indicator will light up to show the operating status.

1.Remove the iCarScan device after using. Do not leave it in the OBDII port; 2.Turn off the ignition before plugging or unplugging the iCarScan device. 4.Purchase diagnostic software Stepl Tap on "Full-System Scan" to enter the car line software list or "Special Tools' to enter the tool software list; Step2 Select the software, tap on the vehicle name or tool name to see more software details; Step3 Tap on "Buy It Now' to enter the purchase confirmation page; Step4 Tap on "Pay" and follow the instructions to complete payment.  

Download and Install the EZdiag App 1 EZdiag App available on the Apple App Store and Google Play Store. 2. Scan the QR Code to download the App