#linearguideways

THK is known for its commitment to innovation and continuous improvement in motion control technology. THK Ball Screw/Spline are components used for motion in a rotational system. Applied in automotive systems, such as steering columns, to achieve controlled linear movement.

To Know More Visit: https://www.seimitsu.in/THK-Linear-Motion-Ball-Screw-Precision-Ball-Screw-Spline.html

Drop us an email at [email protected]

THK is known for manufacturing Linear Guideways, Ball screws, LM Guide Actuators, Cross Roller Ring, Cam Followers, Linear Bushing, and other industrial products. THK Cross Roller Ring is a rotary roller with high rotation accuracy. They are known for their integration in robotic joints with difficult motion and load requirements. THK Cross Roller Rings are available in various models such as:

-Model RU: It consists of inner and outer rings, with mounting holes on both rings which enables stable and accurate rotation.

-Model RB: The outer ring is separable while the inner ring is integrated with the main body.

-Model RE: It is used where the outer ring requires high rotation accuracy.

-Model RA: It is a compact model with thin outer and inner rings with a lightweight design structure.

To Know More Visit: https://www.seimitsu.in/THK-rotation-Cross-Roller-Ring-Cross-Roller-Ring-Inner-Ring-Rotation-Outer-Ring-Rotation-Model-RU.html

Email us at [email protected]

Linear Motion Blocks from Tallman Robotics Limited  SNTC/SNW Linear Motion Blocks.  1. The slider and guide rail are made of stainless steel and carbon steel respectively.     Including sliders, rails, and other metal accessories such as steel balls, retainers, etc., all made of stainless steel material with anti rust properties. 2. Adopting a Gothic four point contact design.     Capable of withstanding loads in all directions, with strong rigidity and high accuracy. 3. Rolling cycle system.     Sliders, rails, steel balls, retainers 4. Reserve oil injection holes on the cover side to inject oil or grease into the interior of the slider for lubrication. 5. Product specifications, models, and characteristics of interchangeability and non interchangeability     Two types of linear slide rails, non interchangeable and interchangeable, have the same specifications and dimensions. The difference is that interchangeable slide rails can be used interchangeably for single shipments, which is more convenient. However, their combination accuracy cannot meet the customized accuracy requirements of non interchangeable slide rails However, SNT has good size control and strict quality requirements in manufacturing, and interchangeability can also meet the needs.

The THK Linear Guideway (Linear Motion) is a highly advanced system that enables linear motion through the integration of rolling components between a rail and a block. This system is capable of creating high-precision, energy-efficient, high-rigidity, and high-speed machines with extended lifespans, and is used in a variety of industries, used in Machine Tools, Semiconductor and LCD Manufacturing equipment, Industrial Robots, Automobile Industry, Aerospace, Medical, and Assistive industries, among many others.

The semiconductor and LCD panel manufacturing equipment is essential for the production of all kinds of electric and electronic appliances, including PCs, cell phones and flat-panel televisions. THK’s products can meet the high technology need for fine movement control.

Applications: LCD Panel Prober Table Units, Glass Substrate Conveyor Equipment, IC dicing saws

Following Linear Guideways are using for above applications:

1. SRS LM Guide: The SRS LM Guide is a miniature type with a compact structure. Part of the LM Block is made of resin to reduce weight. Also, the ball cages eliminate the friction between ball cages and retains lubricants, thus achieving low dust generation.

2.  RSX/RSX-M1: The RSX LM Guide is a two-row gothic arch groove structure, compact, can take loads in any direction and can be used in a single axis where space is required or where moments act.

Here in India SEIMITSU Factory Automation Pvt. Ltd. is an authorized distributor of THK Linear Motion System and we have 12 branch offices as well across India such as Mumbai, Surat, Ahmedabad, Vadodara, Delhi, Faridabad, Ghaziabad, Hyderabad, Chennai, Coimbatore, Bangalore, Pune (Head Office).

Thank you for your valuable attention and please write us at Contact Person Email Id: [email protected]

THK LM Guide Model HCR, HSR-M1 and HSR-M1VV uses in Satellite for the application of Planetary Observation.

This is observatory’s telescope that moves very slowly to observe the stars of the night sky. Vibration-Free, smoothly moving linear guidance systems move quietly as they support the telescope and observatories dome.

LM Guide Mode HCR: The HCR LM Guide allows clearance-free, highly accurate circular motion as opposed to sliding guides or cam followers. You can easily assemble this model by simply mounting the LM Rail and LM block with rail. It allows circular motion of 5 m or greater. Which is impossible for swivel bearings.

LM Guide Model HSR-M1: The HSR-M1 high temperature type LM Guide is capable of being used at the service temperature of up to 150° C thanks to THK’s unique technologies in material, heat treatment and lubrication. The use of stainless steel in end plates and high temperature rubber in end seals achieves the maximum service temperature.

LM Guide Model HSR-M1VV: The HSR-M1VV LM Guide for medium to low vacuum is highly effective in a broad range of environments ranging from atmospheric pressure to vacuum (10-3 pa). A newly developed dedicated labyrinth end seal and special grease help to ensure stable rolling resistance.

Here in India, SEIMITSU Factory Automation Pvt. Ltd. is an authorized distributor of THK and for getting detailed technical information or selection parameters about THK Linear Guideways please do contact us.

Reference link: https://www.seimitsu.in/THK-Linear-Motion-LM-Guide-Full-Ball-Type-LM-Guide.html

Click here to download technical catalogues: https://www.seimitsu.in/pdf/E_01_LMGuide.pdf

For more details contact us: +91 9975185459

Concern Person Email Id: [email protected]

How Linear Guideways does use in Aerospace Industry?

Now a day’s aerospace industry is also demanding for high performance products and systems in Aircraft which is able to survive in unfamiliar environment. THK’s Product Linear Guideways developed for use in special kind of operating environments and equipments are being manufactured from spacecraft bodies to its seat mechanism.

Seat Sliding working Mechanism:

LM Guide Radial Model SR is used often in the aircraft seat sliding mechanism of small size aircraft because the floors are using in Aircraft which are made of steel metal. It is very difficult to place equipment in aircraft and oftenly mounting and measuring related errors arise and become lengthy process therefore despite being all those scenario Linear Motion Guideway Radial Type Model SR is having a unique and excellent capabilities to be absorbed error and optimal capability to be mounted directly on the aircraft floor as result of assembly work is reduced.

Unique Features of LM Guide Radial Type Model SR:

1.      Compact, Heavy Load: Linear Guideways Radial Type Model SR is designed in way that to be used in space constraint place. It has low sectional height and placed ball contact structure robustly in radial direction as a result of optimal for horizontal guide units.

2.      Mounting accuracy can easily be achieved: LM Guide Radial Type model SR is self –adjusting type which is capable of absorbing an accuracy error correspondence and maintain level between two rail, due to its preciseness property it is highly accurate and able to achieve smooth motion easily.

3.      Low Noise Features: The endplate is mounted at the bottom end of LM Block and ensure to be received a smooth motion easily and low noise due to circulation of Balls at moving area/turning area.

4.      High Durability: Though under excessive load differential slip of balls are minimal as result of get high wear resistance and long term maintenance accuracy is achieved.

5.      Stainless Steel Material available: LM Block, LM Rail and Balls are made of stainless steel.

SEIMITSU is an authorized distributor of THK Linear Motion in Pune. We have 8 branch offices across India include Mumbai, Chennai, Surat, Bangalore, Coimbatore, Hyderabad, Ahmedabad and Delhi.

Detailed product information please visit our website: www.seimitsu.in

Please reach on below contact details for further clarifications: Email Id: [email protected]

Phone no.: +91 (20) - 46212700