#ledlightforyoutube

Wholesale Beauty 39 inch 12 tubes Photographic Selfie Led Ring Light With Tripod Stand For Live Stream Makeup Youtube Video 1、 Product instruction digital photography light take the circle as the center outward radiation design, showing sunshaped shadow. Itis controlled by microcomputer chip, digital tube display. And it is made up of 12 tubes of high power's aluminum. The color temperature is from 3200K to 5600K, it can adjust continuously. The characteristic of stable color temperature, high CRI and long lifetime, t Output power is stepless adjustment, here has built-in temperature protection circuit built-in automatic cooling system. This light provides the high quality and power continuous source for real shed base, television, beauty and make up, traditional film photography, digital photography and photographic teaching and other fields. 2、Technical data Specification : Input Voltage: 24V 8A LED Outer Power: 180W Ra:90 Color Temperature:3200k-5600k Input VoltageAC 110V-240V LED number: 1152pcs Dimmer: Stepless adjustment Size: 92cm

1) .LED lamp arms 2) .Body 3) .Shose 1/2/3 4) .Lamp adjusting joint 5) .DC socket. 6) . Holder locking screw A 7) .Body holder 8) Holder locking screw B 9) .Multi-function adjustment knob 10) .Power switch 11) .Display panel 12) .DC power adapter(24V,8A) 13) .AC connect cable 14) .Phone holder Usage: 1. Take out the light from the packagejnstall it on the tripod, 2. Press power switch to turn on the light .when the display screen show the powe’you will enter the brightness adjustment model.The brightness can be adjusted step by step from 5% to 100% increasing clockwise and decreasing step by step in the counterclockwise direction.Each toggle button changes by 1%. 3. In the power-on state,press the switch knob to enter the color temperature adjustment mode when the display shows the color temperature value.The color temperature can be adjusted from 3200K to 5600K,gradually increasing in the clockwise direction, decreasing in the counterclockwise direction,and changing the toggle button by 100K. 4. Press the switch knob to switch between the color temperature adjustment mode and the brightness adjustment mode. 5. Press and hold the switch knob for 2 seconds.When the display show OFF^the device is turned off and the power can be turned off 6. Adjust the arm joint to adjust the LED arm angle and can be retated 90°. 7. The front and rear angle of the lamp body can be adjusted through holder locking screw A