Cut and pasted from a civil engineering group on Facebook:
A variety of common wood joints used in woodworking and carpentry. Let's break down some of these joints:
Simple Joints:
Butt Joint: The simplest joint, where two pieces of wood are simply butted together. Not very strong on its own, often reinforced with glue and screws.
Mitre Joint: Two pieces of wood are cut at a 45-degree angle and joined to form a 90-degree corner. Often used for picture frames and decorative elements.
Interlocking Joints:
Dovetail Joint: A strong joint used in drawers and boxes. Interlocking pins and tails create a very strong connection.
Half-Lap Joint: Two pieces of wood are overlapped, with a portion of each piece removed to create a flat surface for joining.
Mortise and Tenon Joint: A classic woodworking joint where a tenon (a projecting piece) on one piece fits into a mortise (a hole) in another. Strong and used in furniture and construction.
Scarf Joint: Two pieces of wood are cut at an angle and joined to create a longer piece. Used for lengthening boards.
Mechanical Joints:
Biscuit Joint: Thin, oval-shaped biscuits of compressed wood are inserted into slots cut into the joining pieces. Glue is then applied, and the pieces are clamped together.
Dowel Joint: Round wooden dowels are inserted into holes drilled in both pieces of wood, providing a strong mechanical connection.
Pocket Hole Joint: A specialized jig is used to drill angled holes into the edge of one piece of wood. Screws are driven into these holes to connect the pieces.
Other Joints:
Box Joint: A series of interlocking fingers create a very strong and visually appealing joint.
Dado Joint: A groove is cut into one piece of wood to receive the edge of another.
Bridle Joint: A variation of the mortise and tenon joint, with additional interlocking elements.
Rabbet Joint: A groove is cut into the edge of one piece of wood to receive the edge of another.
Tongue and Groove Joint: A tongue (a projecting piece) on one board fits into a groove in another. Commonly used in flooring and paneling.
Half-Dovetail Joint: A simplified version of the dovetail joint, often used for drawer boxes.
Key Considerations:
Strength: The strength of a joint depends on the type of joint, the wood species, the quality of the joinery, and the glue used.
Appearance: Some joints are more visually appealing than others, making them suitable for decorative purposes.
Application: The choice of joint depends on the intended use of the piece and the desired strength and appearance.
This image provides a valuable overview of the various wood joints used in woodworking and carpentry. Understanding these joints is crucial for any woodworker or DIY enthusiast.














