#inductor kit

ATH10KR8B is a newly developed NTC thermistor of our company, Analog Technologies, Inc. This thermistor is the replaced version of our ATH10KR8, which has stopped production. ATH10KR8B series thermistors can be applied for temperature sensing for laser diodes, optical components, etc.

This thermistor is glass encapsulated with high accuracy and high stability. The resistance accuracy is up to 1%. It comes with very short response time. Similar to ATH10KR8, ATH10KR8B series also has three versions, ATH10KR8B, ATH10KR8BT65, and ATH10KR8BT65S. ATH10KR8B comes with bare leads, non-sealed; ATH10KR8BT65 comes with leads covered with high temperature plastic tubing, non-sealed; ATH10KR8BT65S has two leads covered with plastic tubing, sealed. Sealed thermistor can be used in severe environment.

This thermistor comes with compact size, with diameter 0.8mm. The length of the two leads is 65mm. The maximum power at 25°C is 18mW. The temperature range is also very wide: from -55°C~250°C.

The physical photo of ATH10KR8B series thermistor

Besides this thermistor, we have many other types of thermistor: such as ATH10KL2A, ATH10K1R25 and so on. Thesethermistors can work with our TEC module, TEC controller, and Heat sink to achieve a highly stable thermal system.

If you want to know more, please contact us.

SMT Inductor kits are designed and produced by Analog Technologies, Inc. It has been sold in US and overseas market for over 20 years with nearly 100% good feedback. This inductor kit has been improved in some aspects such as compartment lid. The original inductor kit has square compartment lids and doesn’t leak large-size components, such as 1206 or larger, but would leak small size parts; the improved one has round lids and doesn’t leak components even down to 0402. There is one top cover that holds down compartment lids from opening up during storage and transportation. There is a foam pad inside the top cover, which can keep all the coverlets closed when the top cover is closed and locked. We are doing our best to improve and optimize our inductor kits all the time.Inside the inductor kits, there are 128 individual compartments, which holds a certain amount of inductors of a certain value. All the inductors in the inductor kits come from renown manufacturers. Refilling is allowable and easy.