#ict professionals

You must submit a KA02 (Knowledge Assessment) report if you want to work as an engineer in New Zealand but don't have the required citizenship. It evaluates applicants and determines whether they are eligible to immigrate to New Zealand. 

But this question is raised when a candidate lacks the necessary ICT abilities, and they must therefore submit the KA02 report. Even if you didn't major in ICT, you could still acquire a job in New Zealand by demonstrating your work experience there.

What is the KA02 report?

Knowledge Assessment (KA02) is a technical report used to evaluate candidates for migration to New Zealand. An applicant must have the necessary ICT skills and knowledge to be eligible to migrate to New Zealand.

IPENZ evaluates a candidate based on their skill set. Candidates must submit a report to IPENZ detailing their qualifications and work experience in the field of ICT. 

IPENZ is a professional organization for engineers in New Zealand. The organization's members are either engineers or people with a connection to the engineering field in New Zealand.

IPENZ knowledge assessment types

Applicants for New Zealand skilled migration can submit either of the two reports listed below, depending on their work experience and skills.

KA01 Report

Suppose the country from which the candidates graduated is accredited to the Washington Accord, and the university of graduation follows the guidelines of any New Zealand university. In that case, the applicants must submit a KA01 report to IPENZ for skills assessment.

KA02 report

If the University of Graduation is not affiliated with the Washington Accord or any other New Zealand university, applicants must submit a KA02 report to IPENZ for skill assessment.

What should you know before applying for the KA02 Skill Assessment?

You should not begin filling out the application form until you thoroughly review the requirements and documentation. The first and most important step is to read the instructions thoroughly. Then, candidates must ensure their fundamental qualifications and knowledge align with the guidelines. You must fill out the KA02 Report with the specifics of these requirements to substantiate their claim that they are qualified to apply.

Engineering applicants must submit three to four projects based on personal engineering activities approved by IPENZ. To pass, you must provide valid documentation.

Your project reports should be precise and concise. Mention your project's main goal, the total time required to complete it, your position in the firm, the jobs you did, the tasks completed, the challenges encountered, and the organizational structure.

Consider the technical aspects of your projects and the calculations and codes used. At least two examples must be included with the project's design. Additional inventions and documentation developed throughout the project work may be included.

You must assert your skills and qualifications to previous employers, coworkers, and bosses. You must write your report in English and avoid using ambiguous terminology.

What are the most common problems candidates face?

There are several reasons why your KA02 application may be denied on the first attempt. You are not the first engineer to face such rejection, and many have suffered the agony of being rejected for the reasons listed below:

Inadequate competence components are present in the KA02 application.

The use of complicated terminology and long phrases.

Documents are either missing or insufficient to support your engineering activity claim. It will also contain proof of your payment slips.

Incompetent to provide adequate designs, computations, and other technical proof

Plagiarized material and failure to meet deadlines

Why do we recommend professional assistance?

How can you be eligible for a Permanent Residency in Australia with ACS RPL?

A successful ACS RPL report necessitates a great amount of effort on the applicant's part. They must collect the necessary materials, format the report according to ACS rules, and generate an RPL report with the assistance of professionals. If you're unsure what each of these three categories comprises, reading this blog will help you figure it out. Take a deep breath and read through the blog from beginning to end.

To be reviewed by ACS based on an RPL report, you must submit two project reports using the ACS Project Report Form. The project for one report must have begun within the last three years, and the project for the second report must have started within the last five years.

RPL ACS Migration Skills Assessment Criteria

Applicants with tertiary credentials with little or no ICT content or no recognized tertiary qualifications should use the RPL application process.

Suppose you have an AQF Diploma or above with insufficient ICT content. In that case, you will need 6 years of relevant work experience performed at any point in your previous work history and a suitable Recognition of Prior Learning (RPL) application.

To meet the applicability requirements if you don't have a recognized higher education, you'll need 8 years of real work experience and a valid Recognition of Prior Learning (RPL) application.

Required Documents for RPL ACS

If you don't have a formal education, you must have a minimum of eight years of work experience. You needn't have two more years of work experience for the ANZSCO job code you're searching for. ACS RPL Reports can be obtained by submitting the following documents:

Certificate of birth or passport

Name change evidence

Resume 

Proof of educational qualifications: a bachelor's degree (or a master's degree if you already have one) with information such as:

Education/degree title award

Mention the name of the university where you received your degree.

The completion date of the education degree.

You can find information about your course, such as your grades for each topic or part

A color scan of the job references on firm letterhead or a third-party statutory statement. The following items must be included in the job experience document:

Employment start and end dates If you're still working, enter 'To date' as the finish date.

Throughout the onboarding process, all work activities and duties are explained.

Whether the job was full-time or part-time should be included, as well as the number of hours worked per week.

It is mandatory that the author sign their name, position, and contact information on the letterhead of the organization. A letterhead must be signed by the author with their name, position, and contact information.

Important documents for Permanent Residency

The Police Clearance Certificate must be filled out and signed by the user. In the past ten years, PCCs are required for all countries where you spent more than 12 months.

English language tests, such as the ILETS or PTE, are required.

You must demonstrate your education and experience.

To obtain an Australia PR, a health examination must be performed by recognized physicians. HIV/AIDS and tuberculosis screenings

 Attach photocopy of passport's identity pages. The color copy of the passport should be notarized.

A validated birth certificate or a passport are required as proof of age.

Education qualification and work experience letter from the previous ten years.

Income tax documentation over the prior three years, such as Form 16 or ITR

Three passport-size photos are needed.

Qualification requires notarized mark sheets and a degree.

For Australia 189/190 visa applicants, Form 80 must fill out their residential and travel information.

Significance of RPL report preparation 

Your RPL report is based on real-world work experience. If the report contains inaccurate information, it will be rejected.

Give credit if you use someone else's ideas, examples, or diagrams.

Make certain that your RPL report is plagiarism-free. Copying from the internet is not a smart idea. If plagiarized content is discovered, you will be reported to the IBP Department and may face a ban. As a result, utilize samples as a reference and become acquainted with the writing format.

The ACS employs sophisticated tools to detect plagiarism, such as the Turnitin program. As a result, ensure that your report is written entirely in your own words. Check it for plagiarism even if you wrote it yourself to avoid unintentional plagiarism.

The job descriptions you use must be related to the job obligations of the ANZSCO code list occupation you're looking for.

Write the perfect ACS RPL report

Think about the project you're working on. Choose the one that will allow you to demonstrate your knowledge and skills as indicated in any of the ANZSCO codes for which you are applying.

Mention the project's information in each of the report's obligations, including the project's name, the linked firm, and the work you were assigned.

Provide a detailed description of your roles and functions for each project. Describe how your ideas in each project's conception and development resulted in the desired outcome, emphasizing your skills.

Describe the approaches used in each project's System Analysis and Design phase.

Mention the programming languages that were utilized in the project to demonstrate your programming abilities.

To demonstrate your database administration knowledge, go over all of the database management approaches used in the project.

To exhibit your management abilities, including the quality assurance procedures you employed when developing the project. Give a thorough explanation of how the project's security mechanisms functioned.

Provide a compelling outline of your ICT management operations, stressing the range and nature of your skills and responsibilities.

CDRWritersHub for your assistance

Learn the basics of RPL report writing for ACS skill assessment

Migrant engineers who meet the ACS ICT Skill Assessment criteria are eligible for the ACS RPL program. The Australian Computer Society (ACS) is the only organization with access to the skill assessment. The applicants must follow the ACS (Australian Computer Society) booklet, which contains all of the guidelines and tips for the RPL Report. Applicants must complete the ACS Recognition of Prior Learning (RPL) document and upload it as a PDF to the application form.

 Guidelines to prepare RPL report

Recognition of prior learning should be documented in the format recommended by the assessing body, ACS. If you do not follow the RPL examples, your RPL report will be rejected. Here are some words of advice on how to write an RPL report.

When writing your ACS RPL report, you must use accurate data and information. Your visa may be cancelled if you use fraudulent data.

The RPL report contains two main project reports highlighting your professional years over time, and this should be your report and not copied from other sources. 

The ACS has the authority to verify whether the RPL's report is yours or not. They may use TURNITIN software to detect duplicates. As a result, please prepare your report as soon as possible. It isn't supposed to correspond to any other migrants.

If any testing point is plagiarized, your submission will be reported to the Australian Government, your expertise assessment will be withdrawn, and fees paid will not be refunded because you provided false information. So, be cautious at this point.

Follow the migration skill assessment booklet for the Australian Computer Society (ACS) rules. 

  Format of RPL Report for ACS Australia

Section 1: The Key Areas of Knowledge

The applicants must include their qualifications and work experience in this section and demonstrate that they possess the required skills. There are two subtopics in this as well: 

Essential ICT Knowledge

General ICT Knowledge

Section 2: The RPL Project Report

The RPL project report describes the projects you participated in and allows you to demonstrate your abilities as an ICT professional. Each project report should be completed by an ICT professional. This RPL project report is intended to enable you to show your expertise in the knowledge area mentioned in Section 1. The ACS requires two copies of the RPL project report, and the first must be from the previous three years and the second from the previous five years' time.

Qualifications criteria

An Applicant's qualification must meet a broad definition of ICT, which is defined as a profession trusted by society for conceiving, creating, implementing, maintaining, managing, and disposing of ICT infrastructure, products, processes, and services in a broad professional environment—preparing students to work as ICT experts is one of the main goals.

The ACS Skill Assessment is required for those applying for an Australian Skilled Migration Visa. Candidates must meet a variety of qualifying categories and eligibility requirements and criteria before applying for an ACS Skill Assessment. The applicant's experience and skills should align with the degree or certificate obtained. The candidate's ambition is to live and work permanently in Australia.  

The RPL application process should be used by applicants who have tertiary credentials with little or no ICT content or who do not have any recognized tertiary credentials.

1. If your diploma is an AQF Diploma or higher with inadequate ICT content, you'll need 6 years of relevant work experience at any point in your previous work history and an acceptable Recognition of Prior Learning (RPL) application.

2. To meet the suitability requirements, if you do not have a recognized higher education, you must have 8 years of relevant work experience and a successful Recognition of Prior Learning (RPL) application.

You must demonstrate your ICT skills and submit two project reports for your RPL application.

Tips to prepare an excellent RPL Report for ACS Australia.

Fill in the name of the Area of Knowledge topic you want to explain in the box.

In the expandable typing area, explain how you acquired the knowledge and demonstrate the breadth.

In your explanation, you do not need to cover all of the subtopics in the Area of Knowledge, and at least TWO subtopics must be addressed. 

Explain yourself clearly and succinctly.

Each explanation should be between one and one-half pages long.

Why should you choose us for your ACS RPL assessment?

Detailed information on RPL Report Writing Services for Australian Computer Society

Applicants who do not have ICT qualifications or any tertiary ICT qualifications can apply for the RPL skill assessment in Australia. The Australian Computer Society (ACS) is a recognized organization that evaluates your competence level. RPL report is presented to ACS to assess applicants' knowledge and skills as part of the ACS Australia Migration Skills Assessment.

The well-documented RPL report aids in promoting ICT skills, knowledge, and work experience. CDRWritersHub offers expert RPL report writing services with ACS approval guaranteed.

 What is the RPL report?

Australian applicants who don't have a degree in ICT but would like to migrate to Australia to get a skill assessment on ICT-related careers must submit an RPL report to the Australian Computer Society. Under Australia Migration Skills Assessment, the ACS assesses the applicants' knowledge and skills through an RPL report.

Categories for RPL Assessment Application

Applicants may apply for RPL ACS Assessment in one of two categories:

Candidates who do not have a degree in ICT must have a minimum of six years of professional experience in an ICT-related discipline. The field of employment must also be linked to the ANZSCO Code.

Candidates with no tertiary qualifications must have two years of professional experience for eight years of experience. Even though these two years of employment do not have to be linked to the ANZSCO code.

Required Documents for ACS Skill Assessment

Passport – Only the applicant details page, not the entire passport

Evidence of a name change (if applicable)

Curriculum Vitae

Education/Academic Degree or Award Certificate 

Letter of employment

Format of ACS RPL report

This format has two sections, which are detailed below.

Section 1: Key Knowledge Areas

Qualifications and job experience are provided in this part, and it should match the specified skills expertise. This also includes two topics:

I) Essential core it knowledge

It has two topics here under the, but only one of them is chosen.

Topic 1: ICT Professional Knowledge

In two circumstances, you can get professional knowledge about various aspects of ICT. The first is educational endeavours, and the second is work experience. Whereas there are many subtopics under this, you only need to choose two. The subtopics include Ethics, Professional Expectations, Concepts and Issues, Teamwork, Communication, and Societal Issues.

Topic 2: ICT Problem Solving

This area of expertise explains the creative and original concepts ICT workers require. The ICT professional must select two of three topics, and modelling Methods, Problem Understanding Process, Methods, and Tools for Handling Abstraction are the subtopics.

II) General knowledge

In the general ICT knowledge stream, there are three themes you can choose one topic and explain in the context of projects.

Topic 3: Technology Resources

Only two of the three sub-topics under this topic should be chosen. The subtopics are Hardware and Software Fundamentals, Data and Information Management, Data Communications, and Networking.

Topic 4: Technology Building

This topic requires you to choose only two of the three sub-topics. Subtopics include Human Factors, Programming, Information System Development, and Acquisition.

Topic 5: ICT Management

Choose only two of the three sub-topics under this topic and explain them. The subtopics are IT Governance and Organizational Issues, IT Project Management, ICT Service Management, and Security Management.

Section 2: RPL Project Reports

This section contains information or explanations about the projects. You must choose two project reports: one must be based on a project completed within the last three years, and the other must be based on a project completed within the previous five years.

The form for each report contains the following sections, which are explained below:

Overall project requirements include the title of the project, time frame, team structure.

Following that, you discuss the project's stages, divided into four sections.

The following section discusses the project-specific roles and responsibilities.

You must explain the business opportunity or problem that inspired the project.

You need to describe your contribution to finding solutions to those problems.

Following that, you must describe any design or problem-solving methods you used during the project.

You must list the deliverables you anticipated to provide by the end of the project.

Last but not least, you should summarize the results in chronological order. Start with discussing your role in implementing the plan, then evaluate whether the project succeeded or failed, and give extra credit for things you could have done differently.

Things to Know Before Hiring an RPL Writer

Trying to find the best RPL writing service, the provider? You must know these few things you need to know to get a skill visa migration to Australia.

 Should be based in Australia

You must always collaborate with an organization based in Australia. CDRWritersHub, for example, is an Australia-based service provider that is familiar with all of the ACS's standards and all aspects of changes and updated news for skill assessment.

 RPL writers must be professionals

You must always collaborate with an organization based in Australia. CDRWritersHub, for example, is an Australia-based service provider that is familiar with all of the ACS's standards and all aspects of changes and updated news for skill assessment.

Must be familiar with the immigration process

You must choose someone familiar with RPL reports, the immigration process, and the migration skill assessment process as recognized by an authorized body like the Australian Computer Society.

 RPL Writing Service should be registered in Australia

 CDRWritersHub is an Australian company that is both licensed and registered. Our professional writers are fully capable of producing the best RPL report to assist you in receiving a positive skill assessment.

Professional RPL Writing Services from CDRWritersHub

We are Australia's leading RPL writing service provider. Our experts can assist you in obtaining a positive ACS assessment. 

Five Ways to Hire a Good IT Professional

As all managers know, hiring the right people is not easy, and at the same time a very crucial process for the success of an organization. The more complex, fast changing and technologically advanced the world becomes, the more important it becomes to find the right people for the right jobs. This is in particular true for IT-personnel. In fact, in most African countries, businesses are inclined…

Well, 3,000 plus qualifications down to 135 Vocational products for schools! The Department of Education have sent out the list of those that hae been accepted for Perfromance Points from 2014 and I am sure many Awarding Organisations will be set to appeal against the decisions.

Good news! City & Guilds have a number of products in ICT accepted (yes I am challenging a couple of others) and here they are;

500/1729/9 City & Guilds Level 2 Diploma for Software Developers

500/6724/2 City & Guilds Level 2 Certificate for IT Users (ITQ) (QCF)

500/6760/6 City & Guilds Level 2 Diploma for IT Users (ITQ) (QCF)

501/1859/6 City & Guilds Level 2 Diploma in ICT Systems and Principles for IT Professionals (QCF)

Who ever said there are no learning materials out there should have visited this exhibition. e-learning galore and not just for ICT!!

Tools for skills assessment, learn and test health & safety in the work place, career planning against learning and, of course, products for learning a wide range of ICT for users and professionals. In amongst this is Towards Maturity (where I sit writing this and drinking coffee) and opposite The National Skills Academy for IT; TM providing guidance on appropriate learning and helping create best practice, while NSA have a wealth of materials and tests for IT novices, professionals and various business roles.

Course, books, online its all here - obviously for a cost.

The new apprenticeship certification online system for England is scheduled to go live from 19th January.