How to Hide Speaker Wire in a Wall
A lot of people ask how to hide speaker wire in a wall so that they can get the sound they want without the hassle of running cables through the walls. There are a few different ways you can hide speaker wires in the walls, and I will explain what these options are, as well as how to use them.
First, you can use cable ties or zip ties to keep the wires in place in the walls. You just simply tape the wires to the wall with the zip ties or tie them down. This is probably the best solution for most people because it requires very little work on your part, and also it does not require running wires through walls.
The next option you have is to use wire clips and plastic hooks. These will keep your wires from rolling around the room and ending up in places that they may not be wanted. If you are using this method, make sure you place the wire clips or hooks at a slight angle. They should be positioned above the wire that you intend to hide so that they are not seen, but they are not too high or low that they cause any problems with the wiring.
Another option you have is to use wall stickers. Again, you simply place the sticker on top of the wall that you intend to hide the speaker wires in, and then use the clips or hooks to secure the sticker to the wall. This is the easiest solution, as there are no clips, hooks or wires to run, and you do not have to worry about running wires through walls.
Now, if you don't want to use wall stickers, you can always hide speaker wire with tape. Basically, you would take one of the wires that you plan to hide with tape, and then tape it to the wall in the way that will make it look as though the wire was there when it isn't. This method works really well if you have the wires run directly under the window, as it will help hide the wires from being seen. Also, you can cut the wires to the exact length that you need, making this a very easy solution to hide speaker wire in a wall.
Another great way to hide speaker wire in a wall is to use something called wire mesh. This is a clear plastic sheet that you can install over your wires in the wall and cover. This is a great option if you don't want to have to run wires through walls, and you don't want to have wires hanging down in your walls. You can buy this from most hardware stores, but you can also make one at home with the help of a friend or a few clicks of the mouse and some online search.
How to hide speaker wire on wall
Wire mesh is fairly inexpensive, and you can have it done in less than an hour. However, make sure that you follow the directions to the letter so that it doesn't come loose, otherwise you will have to take it down and replace it before you can install it. Once it is installed, you can put the plastic mesh over the speaker wire, and then tape to the wall to cover the wires, and it will stay in place until you are ready to put in the speakers. If you aren't sure about how to hang the wires, then you can purchase the speaker wire covers that have hooks attached so that the wires do not slide around.
If you are looking for a solution to hiding speaker wire in a wall, there are many different options, and I have outlined three different methods above. You just need to make sure that you are doing all of your research ahead of time, and that you follow the directions to the letter.
