Building owners are already getting some heating bills that are already a bit higher than they would like and according to most, this is going to continue.  Add to that record high fuel prices and some may be regretting not upgrading their boiler management systems soon.

The good news is that advanced heating controls from Heat-Timer® are designed to integrate easily, without wires, into existing buildings in hours, not days. Both small and large building owners can take advantage of the easy installation of either the Genesis, or Platinum  Heat-Timer® heating controls. With such a simple installation it is easy to get up and running, allowing you to save up to 30% on fuel costs for the rest of the winter and every year to come.

In the 5 New York City boroughs there are literally thousands of multi-family dwellings housing millions of residents. Many of those buildings are on the smaller side, housing anywhere from 2 to 20 families. And the vast majority of those were built more than 50 years ago, using single steam or hot water boilers to heat radiators with piping, wiring, and risers buried long ago inside the walls of these buildings.

 Building owners looking to modernize their heating systems to save on fuel, were often put off by the cost of recommended upgrades, especially when construction costs were factored in. Even heating control and thermostat solutions sometimes required running wires through multiple floors down to the

boiler room, when existing wiring could not support modern device interface requirements, or the wiring simply wasn’t where it needed it to be.

Genesis Was Made For This.

The key to achieving the level of comfort and savings that Heat-Timer Genesis® does, is its use of our proprietary wireless space sensors. By reporting space temperatures in key areas of the building identified by your heating technician, the self-learning algorithms of Heat-Timer Genesis® can actually learn the heating characteristics of your building.

And since the space sensors are wireless and boast extended range, they can simply be hung on a wall inside an apartment and the signal will reach through up to 10 floors to report to the Heat-Timer Genesis® unit. No running wires or setting up wireless repeaters. The sensors don’t even need to be plugged in, they run on two AA batteries and last for 10+ years.

Heat-Timer Genesis® – An Easy Button for Fuel Savings and Installation

Small apartment building owners can finally make an investment in improving their heating systems that doesn’t require them to have a PHD in HVAC, or take out a second mortgage or rip up their beautiful old building. The Heat-Timer Genesis® was made for you.

For the larger buildings of 20 units or more we recommend our tried and true Platinum Heating Controls. The same ease of installation applies to the Platinum controls where wireless sensors make integration into existing buildings a snap. Plus you have internet access anywhere, self learning algorithms that anticipate the unique thermal loss characteristics of your building, Real time alerts, Use with Steam or Hot Water Boilers and fuel savings up to 30%

For ordering information, give us a call or visit our website to learn more: https://www.heat-timer.com/the-genesis/

As word starts to get around about Heat-Timer® Genesis, we’re getting many questions about this revolutionary new technology for saving money on fuel in small buildings. Here’s answers to a few of the most common questions. For more detailed information, please feel free to call our team at (973) 575-4004

How many space sensors does Genesis come with? The Genesis Control comes with three space sensors but can support up to 5.

How much can I expect to save in fuel consumption? You can expect to save up to 30% on fuel usage.

How do I access the building my control is in? The Genesis is fully mobile and internet enabled. You can access the control from any computer, tablet, or smartphone using our web portal or free mobile app.

Is the web and mobile experience the same as the one used for Heat-Timer® Platinum Controls? Yes, the portal, the mobile app, and the alarms, emails, and text alerts and ability to monitor and control your boiler are the same.

How long will the sensor batteries last? Battery life is over 10 years, thanks to use of the latest low power electronics.

Can the Genesis operate with Steam based Heating? The Heat-Timer Genesis® Can operate perfectly on either steam or hot water, single boiler systems.

Blog

For larger apartment and co-op buildings, Heat-Timer’s Platinum Series Boiler Controls have been the industry leading solution to saving energy for a long time.  Among HVAC professionals the phrase “Why don’t you install a Heat-Timer®” is both a general statement and a brand endorsement in discussions of energy efficiency and boiler room upgrades. 

Smaller apartment buildings of 20 units or less with forward thinking managers have also taken advantage of the Platinum series control.  For some, the cost of the world’s most effective heating control especially in colder climates, was justifiable when considering the money saved on utility bills every month, and the ease of remote monitoring and management that a fully internet enabled platinum control brings.

Right Sizing the Platinum Control for Small Buildings

It turns out that a lightweight version of our Platinum Internet Control is a huge win for small building owners.  With smaller up-front costs, return on investment (ROI) is greatly accelerated for small buildings of 20 units or less.

The Heat-Timer Genesis™ has several parts that make this investment a no-brainer for small building owners and managers:

Remote Alarms sent via text message and/or email. Set up thresholds for multiple alarm conditions and get notified before problems happen. 

Internet Management Portal – Use any browser to go to our management website to view your entire portfolio of buildings. Drill down to see control settings, alarms, and heating graphs or reports of activity and cycling from the comfort of your couch.

Heat-Timer® Mobile App – On the road? Did you get an alarm from a      Heat-Timer® control in one of your buildings? Checking things out is a      piece of cake by just firing up our app on your phone and drilling into      building data. Most parameters impacting boiler operation are modifiable   right from our phone app.  Works on iPhone and Android devices, a      free download from the app store.

 Call a Heat-Timer® Rep Today to Talk about the Genesis of Heating Technology

Heat-Timer Genesis™ is shipping today. It’s not too late to get one installed for the upcoming heating season, after all, it’s easy.

* Actual Savings may vary. Monthly savings is dependent on actual number of heating degree days.  https://www.heat-timer.com/

In the 5 New York City boroughs there are literally thousands of multi-family dwellings housing millions of residents. Many of those buildings are on the smaller side, housing anywhere from 2 to 20 families. And the vast majority of those were built more than 50 years ago, using single steam or hot water boilers to heat radiators with piping, wiring, and risers buried long ago inside the walls of these buildings.

Building owners looking to modernize their heating systems to save on fuel, were often put off by the cost of recommended upgrades, especially when construction costs were factored in. Even heating control and thermostat solutions sometimes required running wires through multiple floors down to the boiler room, when existing wiring could not support modern device interface requirements, or the wiring simply wasn’t where it needed it to be.

Genesis Was Made for This. The key to achieving the level of comfort and savings that Heat-Timer Genesis™ does, is its use of our proprietary wireless space sensors. By reporting space temperatures in key areas of the building identified by your heating technician, the self-learning algorithms of Heat-Timer Genesis™ can actually learn the heating characteristics of your building.

And since the space sensors are wireless and boast extended range, they can simply be hung on a wall inside an apartment and the signal will reach through up to 10 floors to report to the Genesis Heat-Timer ™ unit. No running wires or setting up wireless repeaters. The sensors don’t even need to be plugged in, they run on two AA batteries and last for 10+ years.

Heat-Timer Genesis™ – An Easy Button for Fuel Savings and Installation Small apartment building owners can finally make an investment in improving their heating systems that doesn’t require them to have a PHD in HVAC, or take out a second mortgage or rip up their beautiful old building. The Genesis Heat-Timer™ was made for you.

Content- At a high level, there are really two key area’s where Heat-Timer Genesis™ pushes the envelope of capability for a modern heating control. One area is certainly its ability to save small building owners on fuel costs while maintaining even better resident comfort. But the other area is certainly its ability to improve the quality of life, and ease of use for building managers, owners, supers and HVAC technicians alike, owing to its completely internet and mobile enabled interactions.

Heating Control Remote Alarms

One key area is that of remote alarms. Genesis Heat-Timer ™ can send real-time alarms to designated users via either email or text, or within the free Heat-Timer® Mobile App. Furthermore, alarm thresholds can be set based on user preference. There are also more types of alarms available than ever before, and these alarms provide instant and clear indication as to what they are and where the problem is located. In many cases an alarm condition can be managed remotely, or a technician can be called, without ever needing to visit the boiler room.

Heat-Timer® Mobile App

From a quality-of-life standpoint, the visibility the free mobile app provides, means that you don’t really have to get off the couch to work a problem. The Mobile App is designed to show building managers a bird’s eye view of their building portfolio and allow them to drill into any property instantly. Small buildings using Heat-Timer Genesis™ can be viewed alongside larger buildings using our Heat-Timer® Platinum Series controls that are BuildingNet enabled.

Visit- https://www.heat-timer.com

One of the key features that sets Genesis Heat-Timer™ apart from other heating controls is the inclusion of pre-programmed wireless space sensors.  The base product includes three space sensors but can connect to up to 5 for appropriate coverage of a typical small building of 20 units or less.

Installing the space sensors couldn’t be easier, simply mount them on the wall with the provided hardware in an apartment.  The wireless sensors with their extended range, will report space temperatures directly to Genesis without need of repeaters or additional network hubs.

The space sensors perform a key role in the control of the heating system.  By utilizing building temperature readings from all areas of the building along with the outside temperature, algorithms actually self-learn the heating characteristics of your building.

The best part for building owners is that the Genesis Heat-Timer™, utilizing its space sensors, is able to do this using the absolute minimum amount of fuel possible without sacrificing resident comfort.  You can expect to save up to 30% on your fuel costs this winter, while maintaining a uniformity of building temperatures you never would have thought possible.

The Wireless Space Sensors last up to 10+ years before battery replacement is needed.  Battery status for each sensor is viewable remotely through the internet portal as well.

For more information about the Genesis Heat-Timer™ please view our website https://www.heat-timer.com/the-genesis/      

   The Heat-Timer® Announces the Launch of     Genesis Heat-Timer

“A New Energy Management System for Small                                          Buildings”

FOR IMMEDIATE RELEASE – August 1st, 2022                         

Heat-Timer® Corporation Fairfield, New Jersey 

Heat-Timer®, a leader in commercial heating controls since 1937, announces the launch of their new product, Genesis Heat-Timer™. The Genesis Heat-Timer™ heating control is an extremely cost-effective solution for both steam and hot water heating systems in single boiler applications (20 units or less). 

Genesis Heat-Timer™ features a unique self-learning algorithm that incorporates outdoor air temperature along with in-unit ambient feedback to anticipate and compensate for the unique heat loss characteristics of your building.  With this self-learning feature in place, Genesis Heat-Timer™ can regulate your building and provide up to 30% savings on monthly energy bills while improving resident comfort.  You pick the temperature you want your building to maintain, and the Genesis Heat-Timer™ does the rest.  

Jeff Clerico, Vice President of Sales and Marketing, describes the Genesis Heat-Timer™ online portal as a time-saver for building owners/managers. “Our user-friendly online portal and Mobile App allow complete and seamless visibility into all of your buildings remotely, to eliminate those unexpected and inconvenient trips to the boiler room.  You can modify all key heating parameters, receive important alerts via text/email, and check live apartment temperatures on the fly.”

The Genesis Heat-Timer™ is a true out of the box Energy Management System. In addition to getting your heat under control, the Genesis Heat-Timer™ acts as the eyes and ears within your boiler room, alerting you in real-time when problems arise before residents are impacted.  From leak/flood detection and boiler health, to domestic hot water temperature and beyond, the Genesis Heat-Timer™ has you covered.  

The Genesis Heat-Timer™ is now available for ordering. For more information on how Genesis Heat-Timer™ can help your building please click the link below or call us directly at (973) 575-4004. https://www.heat-timer.com/ht_products/genesis/      

The Heat-Timer® Announces the Launch of  Genesis Heat-Timer™ “A New Energy Management System for Small Buildings”

FOR IMMEDIATE RELEASE – August 1st, 2022                         

Heat-Timer® Corporation Fairfield, New Jersey 

Heat-Timer®, a leader in commercial heating controls since 1937, announces the launch of their new product, Genesis Heat-Timer™. The Genesis Heat-Timer™ heating control is an extremely cost-effective solution for both steam and hot water heating systems in single boiler applications (20 units or less). 

Genesis Heat-Timer™ features a unique self-learning algorithm that incorporates outdoor air temperature along with in-unit ambient feedback to anticipate and compensate for the unique heat loss characteristics of your building.  With this self-learning feature in place, Genesis Heat-Timer™ can regulate your building and provide up to 30% savings on monthly energy bills while improving resident comfort.  You pick the temperature you want your building to maintain, and the Genesis Heat-Timer™ does the rest.  

Jeff Clerico, Vice President of Sales and Marketing, describes the Genesis Heat-Timer™ online portal as a time-saver for building owners/managers. “Our user-friendly online portal and Mobile App allow complete and seamless visibility into all of your buildings remotely, to eliminate those unexpected and inconvenient trips to the boiler room.  You can modify all key heating parameters, receive important alerts via text/email, and check live apartment temperatures on the fly.”

The Genesis Heat-Timer™ is a true out of the box Energy Management System. In addition to getting your heat under control, the Genesis Heat-Timer™ acts as the eyes and ears within your boiler room, alerting you in real-time when problems arise before residents are impacted.  From leak/flood detection and boiler health, to domestic hot water temperature and beyond, the Genesis Heat-Timer™ has you covered.  

The Genesis Heat-Timer™ is now available for ordering. For more information on how Genesis Heat-Timer™ can help your building please click the link below or call us directly at (973) 575-4004. https://www.heat-timer.com/ht_products/genesis/