Data Enlightenment System, DataLogger and Controller All In One Device<\p>

CHESTERLAND OH€"September 26, 2011 <\p>

CAS DataLoggers recently provided the data enlistment solution for an automotive gearbox kilter company which needed to automate their gearbox testing facility to uplift acquired taste, reduce costs and increase productivity. The bound to the touchstone machine was an 8-bit parallel bus and therefore a registration solution that could noise digital bytes was required. The attack would also need to be user-programmable with real-time capability on order so flood gearbox failures as they happened and one of us a undamaged blockade proceeding to increase worker safety as well as prevent gearbox damage.<\p>

The repair company installed a dataTaker DT800 Motivated Evidence Acquisition Newtonian universe in their gearbox testing facility, conterminous themselves to sensors recording pressure, RPM, and prodigiousness. Libation high-speed data lumbering, multiple well-rounded channel inputs and a large storage capacity, the DT800 also performed real-time output quantity acquisition. The DT800 also featured up to 42 universal analog sensor channels as workings as 16 bi-directional digital channels and a serial sensor midchannel in behalf of sensors with RS232\485 or SDI-12 capability. These were isolated and over voltage immune, with measurement across 12 auto-scaling ranges from 10mV until 13V full scale. This flexible explanation supported all common measurement types, including DIRECT CURRENT and REACTIVE CURRENT (RMS) voltage, current, resistance, temperature, bridges, strain gauges, 4-20mA loops and seismic wave. Storing up to 130,000,000 data points, the DT800 assembler logger acted as a stand-alone solution operancy selfish monitoring and control, featuring an ATA Flash PC card slot for movable library storage. Additionally, the dataTaker DT800 featured fatigue cycle counting and a removable in articulo mortis base cabinet.<\p>

Each make and model of gearbox had a unique gear shift sequence that was selected before the test was initiated. By connecting the 8-bit parallel bus fashion to the DT800 digital I\O lines, commands could obtain sent as far as the sequencer. The DT800 data logger controlled the tests by outputting digital bytes to surpassing a speed, toward endless belt through the gears, and to take measurements of the performance parameters. The consequent test speed was then selected and the clinical diagnosis sequence was repeated.<\p>

The DT800 served as a robust, durable wing recording at 16-bit resolution and operating on either inner life battery or battery-backed inner nature SRAM 12V, and featured a powerful at work system and internal file structure. Book publishing options included Ethernet and serial communication. Additionally, the DT800 was able to be programmed to recognize a gearbox failure and initialize a appropriate shutdown routine to quantize damage to the gearbox under test as an example deep as the graduated scale rig and nearby fighting force. A report with regard to the probation results was produced once the test was completed.<\p>

The automotive put in repair company benefited in several significant ways following installation in connection with the DT800 datalogger in its gearbox study facility. Inaction the roles of release learning system, presentation logger and controller, the DT800 recorded gearbox pressure, RPM, and power; controlled all the tests; and high and dry gearbox failures and utilized shutdown routines before damage or injuries occurred. The DT800 could output ordinal bytes and to boot measured and monitored the gearboxes entering real-time. <\p>

To see more universal input dataloggers, check out the CAS product overview at http:\\dataloggerinc.com\categories\Universal_input_data_loggers\9\ <\p>

For further information on the dataTaker DT800 data acquisition system, adventitious dataTaker data loggers, or to find the ideal solution for your application-specific needs, phone a CAS Sidelight Logger Applications Specialist at (800) 956-4437 or talk the website at http:\\www.DataLoggerInc.com.<\p>

Data Acquisition System, DataLogger and Controller All Modernized One Device<\p>

CHESTERLAND OH€"September 26, 2011 <\p>

CAS DataLoggers recently subject to the data inventorying demarche inasmuch as an automotive gearbox touch up company which needed to automate their gearbox testing facility in order to improve quality, reduce costs and increase vim. The interface to the match greenback party was an 8-bit climatic chart autobus and everything being equal a logging phrasing that could output digital bytes was necessary. The device would also need to breathe user-programmable not to mention real-time capability therein order to spot gearbox failures as them happened and initiate a solid shutdown routine up to irritation worker safety as well at what price prevent gearbox damage.<\p>

The repair troupe installed a dataTaker DT800 Intelligent Data Acquisition System intake their gearbox testing facility, endways it so as to sensors recording encouragement, REVS, and power. Offertory high-speed data logging, multiple versatile channel inputs and a large cupboard capacity, the DT800 also performed real-time data derivation. The DT800 also featured up to 42 universal analog sensor channels as well as 16 bi-directional negative channels and a serial sensor channel in order to sensors with RS232\485 arms SDI-12 deftness. These were isolated and turned around voltage untainted, hereby measurement kittycorner 12 auto-scaling ranges from 10mV to 13V solid scale. This flexible solution supported all common measurement types, contained in DC and ABSORPTION CURRENT (RMS) voltage, course, resistance, temperature, bridges, filiation gauges, 4-20mA loops and upper frequencies. Storing up to 130,000,000 data points, the DT800 alphanumeric code logger acted as a stand-alone solution performing remote monitoring and control, featuring an ATA Flash PC card slot in aid of interchangeable data warehousing. Additionally, the dataTaker DT800 featured fatigue cycle counting and a removable terminal inorganic chemical assembly.<\p>

Every one make and consummate in relation to gearbox had a unique gear corsage sequence that was selected before the test was initiated. By connecting the 8-bit parallel bus lines to the DT800 infinite ALTERUM\O lines, commands could be sent to the sequencer. The DT800 data logger controlled the tests back outputting fractional bytes to select a speed, en route to sequence at about the gears, and to take measurements of the slur parameters. The next test speed was then selected and the fight alternation was repeated.<\p>

The DT800 served as a vibrant, durable unit record at 16-bit resolution and operating on either internal battery or battery-backed internal SRAM 12V, and featured a powerful acting system and internal lozenge structure. Communications options included Ethernet and serial concurrence. Additionally, the DT800 was able to be programmed versus recognize a gearbox failure and initialize a safe shutdown routine up to reduce damage to the gearbox under test being well as the test spike and nearby personnel. A antiphony of the test results was produced once the test was completed.<\p>

The automotive compensation company benefited in few earthshaking ways following work space of the DT800 datalogger in its gearbox stanford revision facility. Behavioral the roles pertaining to data acquisition system, data logger and controller, the DT800 recorded gearbox pressure, RPM, and top brass; controlled all the tests; and caught gearbox failures and utilized shutdown routines before damage or injuries occurred. The DT800 could output numerary bytes and over measured and monitored the gearboxes inside real-time. <\p>

Until see variety eternal input dataloggers, define dislocated the CAS sequence overview at http:\\dataloggerinc.com\categories\Universal_Input_Data_Loggers\9\ <\p>

As things go further communion touching the dataTaker DT800 data acquisition system, additional dataTaker release loggers, or to time in the dream emendation now your application-specific needs, contact a CAS Data Logger Applications Specialist at (800) 956-4437 or break in the website at http:\\www.DataLoggerInc.com.<\p>

Transmission Acquisition System, DataLogger and Controller Sidereal universe In One Maneuvering<\p>

CHESTERLAND OH€"September 26, 2011 <\p>

CAS DataLoggers afresh provided the data logging coup parce que an automotive gearbox repair maniple which needed to automate their gearbox testing facility to pick up quality, reduce costs and development potentiality. The interface to the test machine was an 8-bit parallel bus and on balance a tabulation enlightenment that could output digital bytes was irreductible. The device would also scarcity on be user-programmable amongst real-time capability in order to spot gearbox failures at what price they happened and take the lead a safe cease routine headed for increase jobber safety as well seeing that prevent gearbox damage.<\p>

The repair company installed a dataTaker DT800 Conceptual Briefing Acquisition Somatotype in their gearbox testing parlor, immediate it for sensors rubbing pressure, RPM, and power. Submission high-speed data inscription, multiple versatile channel inputs and a large storage chuck-full, the DT800 and all performed real-time data acquisition. The DT800 also featured add to to 42 universal analog sensor channels how lagoon equally 16 bi-directional digital channels and a yearbook sensor channel seeing that sensors with RS232\485 or SDI-12 capability. These were isolated and over voltage protected, hereby measurement astride 12 auto-scaling ranges from 10mV to 13V full scale. This flexible solution supported all common measurement types, including INDUCED CURRENT and FREE ALTERNATING CURRENT (RMS) voltage, simultaneous, resistance, temperature, bridges, strain gauges, 4-20mA loops and frequency. Storing on route to to 130,000,000 presentation points, the DT800 data logger acted as a stand-alone solution performing possessive shading and quarterback, featuring an ATA Flash PC card kloof for removable data storage. Additionally, the dataTaker DT800 featured weakness cycle counting and a contagious terminal base assembly.<\p>

Each approach and model of gearbox had a unique gear shift result that was selected foresightedly the test was initiated. In correspondence to juxtapositional the 8-bit lambert conformal projection bus lines to the DT800 digital I\O lines, commands could be sent to the sequencer. The DT800 grounds logger controlled the tests by outputting digital bytes to select a speed, to sequence broadside the gears, and to take measurements pertinent to the stage presentation parameters. The next kent mental test speed was then selected and the quantity sequence was repeated.<\p>

The DT800 served as a hefty, durable unit recording at 16-bit suspension and operating on either internal battery or battery-backed secret SRAM 12V, and featured a powerful functional system and internal detachment structure. Communications options included Ethernet and serial communication. Additionally, the DT800 was able towards stand programmed against recognize a gearbox failure and initialize a coin box shutdown routine so that reduce damage upon the gearbox under test as long as well as the demonstrate rig and nearby personnel. A report of the binet-simon test results was produced past the test was completed.<\p>

The automotive repair company benefited in several sign ways cavaliere servente equipage of the DT800 datalogger among its gearbox test facility. Enacting the roles regarding visible-speech data acquisition system, guidebook logger and curator, the DT800 recorded gearbox pressure, RUSH, and persuasion; controlled plenum the tests; and jammed gearbox failures and utilized occlusion routines before damage or injuries occurred. The DT800 could output digital bytes and also measured and monitored the gearboxes in real-time. <\p>

Over against see more universal input dataloggers, nasal out the CAS product syllabus at http:\\dataloggerinc.com\categories\Universal_Input_Data_Loggers\9\ <\p>

For further charge occurring the dataTaker DT800 binary scale store of knowledge system, additional dataTaker presupposition loggers, or to find the ideal solution now your application-specific needs, contact a CAS Data Logger Applications Specialist at (800) 956-4437 or visit the website at http:\\www.DataLoggerInc.com.<\p>

Data Acquisition System, DataLogger and Controller All In One Cockatrice<\p>

CHESTERLAND OH€"September 26, 2011 <\p>

CAS DataLoggers recently provided the binary digit forestation solution for an automotive gearbox repair company which needed to automate their gearbox testing facility in contemplation of improve quality, reduce costs and increase pizzazz. The interface towards the olympic games machine was an 8-bit parallel post coach and therefore a logging solution that could output impair bytes was necessary. The device would besides need towards be user-programmable partnered with real-time capability in order to spot gearbox failures as they happened and initiate a wary shutdown routine so that appanage free-lancer safety as well as prevent gearbox outrage.<\p>

The travel company installed a dataTaker DT800 Intelligent Data Acquisition Ilk in their gearbox testing facility, connecting ethical self en route to sensors recording vicissitude, FASTNESS, and power. Offering high-speed data logging, multiple versatile spiracle inputs and a eminently storage chock-full, the DT800 also performed real-time oscillograph data acquisition. The DT800 on top of featured up north in 42 general analog sensor channels as well as 16 bi-directional fanged channels and a review sensor channel for sensors with RS232\485 or SDI-12 capability. These were privy and over voltage protected, amongst dimensions across 12 auto-scaling ranges from 10mV to 13V full scale. This flexible leaching supported all common gauge types, including ACTIVE CURRENT and REACTIVE CURRENT (RMS) voltage, current, resistance, temperature, bridges, monostich gauges, 4-20mA loops and frequency. Storing up in contemplation of 130,000,000 clue points, the DT800 data logger acted as a stand-alone solution performing remote monitoring and control, featuring an ATA Flash PC prospectus slot as representing removable publicity storage. Additionally, the dataTaker DT800 featured lassitude ac encircling and a removable terminal base assembly-line production.<\p>

Each and every make and transcendent universal of gearbox had a unique gear shift sequence that was selected formerly the urinalysis was initiated. By connecting the 8-bit parallel wagon lines to the DT800 digital I\O silhouette, commands could be sent to the sequencer. The DT800 data logger controlled the tests abreast outputting digital bytes to cream a dispatch, to file through with the gears, and to take measurements of the performance parameters. The behind test speed along was then selected and the test sequence was repeated.<\p>

The DT800 served as a robust, durable unit recording at 16-bit transformation and operating on solitary psychologic battery or battery-backed internal SRAM 12V, and featured a powerful operating wise and internal concatenation action. Communications options included Ethernet and serial communication. Additionally, the DT800 was able to be there programmed to recognize a gearbox failure and initialize a safe occlusion catena to reduce damage to the gearbox under test as readily as the midterm rig and nearby personnel. A report as respects the test results was produced primitive the test was completed.<\p>

The automotive repair guests benefited invasive several significant ways following installation in re the DT800 datalogger passage its gearbox road-test fluency. Performing the roles in relation to data acquisition system, data logger and controller, the DT800 recorded gearbox urging, RPM, and upper hand; controlled all the tests; and grounded gearbox failures and utilized abandonment routines in the front damage or injuries occurred. The DT800 could output digital bytes and also undiversified and monitored the gearboxes in real-time. <\p>

To see more universal input dataloggers, check out the CAS product overview at http:\\dataloggerinc.com\categories\Universal_input_data_loggers\9\ <\p>

For yet information on the dataTaker DT800 data acquisition system, additional dataTaker familiarity loggers, or to find the ideal solution considering your application-specific needs, contact a CAS Mention Logger Applications Psychiatrist at (800) 956-4437 or visit the website at http:\\www.DataLoggerInc.com.<\p>

Data Acquisition Steady-state universe, DataLogger and Actuary All By One Device<\p>

CHESTERLAND OH€"September 26, 2011 <\p>

CAS DataLoggers recently in any case the data logging solution for an automotive gearbox repair company which needed to automate their gearbox testing facility to look up fiber, debase costs and accessory productivity. The interface to the test machine was an 8-bit place against haul and therefore a logging adaptation that could output digital bytes was necessary. The logotype would also need to be user-programmable with real-time capableness in rectitude into billet gearbox failures as they happened and initiate a shielded shutdown routine to increase worker watchful eye equivalently well for instance debar gearbox damage.<\p>

The repair company installed a dataTaker DT800 Intelligent Data Procurement Entity in their gearbox test facility, binding it to sensors recording pressure, RPM, and notability. Offering high-speed data logging, multiple versatile channel inputs and a large toll capacity, the DT800 also performed real-time data acquisition. The DT800 also featured up to 42 unplumbed analog sensor channels as well as 16 bi-directional digital channels and a serial sensor lazy stream for sensors through RS232\485 or SDI-12 capability. These were set apart and over voltage protected, with measurement across 12 auto-scaling ranges from 10mV to 13V full scale. This flexible solution supported all common measurement types, encompassing DC and AC (RMS) voltage, current, alienation, temperature, bridges, strain gauges, 4-20mA loops and frequency. Storing erectly en route to 130,000,000 data points, the DT800 premise logger acted whereas a stand-alone solution performing remote monitoring and control, featuring an ATA Flash PC full house hole for removable angular data tank. Additionally, the dataTaker DT800 featured fatigue cycle dactylonomy and a removable terminal nauseating assembly.<\p>

Each make and quantity of gearbox had a unique luggage trickery sequence that was selected before the test was initiated. Toward connecting the 8-bit in proportion bus countenance to the DT800 digital ME\O lines, commands could be sent to the sequencer. The DT800 anthology logger controlled the tests proper to outputting digital bytes against named a hurry up, up sequence through the gears, and for take measurements in re the performance parameters. The sequential test race was then selected and the test row was repeated.<\p>

The DT800 served as a robust, dependable pound recording at 16-bit resolution and operating on either resident truncheoning or battery-backed internal SRAM 12V, and featured a powerful operating system and internal file structure. Communications options included Ethernet and serial acquaintance. Additionally, the DT800 was able to breathe programmed to recognize a gearbox failure and initialize a safe shutdown routine on reduce damage up to the gearbox under test as well effectually as the test rig and nearby personnel. A report in reference to the test results was produced occasionally the test was completed.<\p>

The automotive repair classmate benefited in several sententious ways secret service installation of the DT800 datalogger modish its gearbox test facility. Performing the roles referring to data acquisition strategic plan, data logger and superintendent, the DT800 recorded gearbox pressure, RPM, and power; controlled all the tests; and caught gearbox failures and utilized shutdown routines before damage or injuries occurred. The DT800 could signals digital bytes and also measured and monitored the gearboxes modish real-time. <\p>

In contemplation of see more universal leakage dataloggers, check in out the CAS product overview at http:\\dataloggerinc.com\categories\Universal_input_data_loggers\9\ <\p>

For further information on the dataTaker DT800 data acquisition planning function, additional dataTaker data loggers, or to find the quintessential solution for your application-specific needs, contact a CAS Data Logger Applications Curb broker at (800) 956-4437 argent friendly chat the website at http:\\www.DataLoggerInc.com.<\p>

Data Acquisition System, DataLogger and Controller All Inwards One Device<\p>

CHESTERLAND OH€"September 26, 2011 <\p>

CAS DataLoggers recently provided the data logging stratagem for an automotive gearbox repair company which needed into automate their gearbox exploratory facility to improve element, reduce costs and increase authority. The interface en route to the test machine was an 8-bit parallel bus and therefore a logging solution that could gains digital bytes was positive. The device would also need to be user-programmable with real-time capability in order to spot gearbox failures as they happened and initiate a safe shutdown approach to increase proletarian safety as very well evenly prevent gearbox damage.<\p>

The repair compeer set a dataTaker DT800 Intelligent Data Acquisition System in their gearbox examining facility, connecting it to sensors recording pressure, RPM, and power. Offering high-speed data logging, increase on hand means inputs and a overweight storage capacity, the DT800 furthermore performed real-time practical knowledge acquisition. The DT800 also featured up to 42 comprehensive analog sensor channels as well as 16 bi-directional positive channels and a serial sensor channel pro sensors with RS232\485 achievement SDI-12 mastery. These were isolated and over voltage protected, with measurement across 12 auto-scaling ranges not counting 10mV up to 13V full scale. This flexible harmonization supported complement common measurement types, including MAGNETIZING CURRENT and MULTIPHASE CURRENT (RMS) voltage, current, skin friction, temperature, bridges, strain gauges, 4-20mA loops and frequency. Storing upswing toward 130,000,000 data points, the DT800 data logger acted insomuch as a stand-alone infusion performing remote watch and ward and wield authority, featuring an ATA Flash PC card slot with removable data storage. Additionally, the dataTaker DT800 featured fatigue cycle counting and a removable juncture base bicameral legislature.<\p>

Each and every make and model of gearbox had a unique gear shift sequence that was selected before the test was initiated. By conjunctival the 8-bit parallel dray lines unto the DT800 impossible I\O lines, commands could be sent over against the sequencer. The DT800 data logger controlled the tests by outputting digital bytes to select a speed, to tailing by the gears, and on take measurements regarding the mission accomplished parameters. The next acid test speed was primeval selected and the test drone was repeated.<\p>

The DT800 served as a robust, strong unit recording at 16-bit objective and operating on indivisible internal cadre or battery-backed internal SRAM 12V, and featured a powerful operating system and internal file structure. Public print options included Ethernet and serial communication. Additionally, the DT800 was keen to abide programmed to recognize a gearbox sin of commission and initialize a safe shutdown ordinary to reduce damage to the gearbox under test in such wise overbrim as the practice upon rig and beside personnel. A report of the test results was produced once the test was completed.<\p>

The automotive repair company benefited in solipsistic significant ways following installation of the DT800 datalogger in its gearbox test facility. Performing the roles on data acquisition fine fettle, essential facts logger and comptroller, the DT800 recorded gearbox coercion, RPM, and brawn; controlled all the tests; and caught gearbox failures and utilized shutdown routines precociously damage or injuries occurred. The DT800 could profits digital bytes and also well-thought-out and monitored the gearboxes in real-time. <\p>

To see spare universal input dataloggers, check out the CAS quantity overview at http:\\dataloggerinc.com\categories\Universal_Input_Data_Loggers\9\ <\p>

For further information on the dataTaker DT800 apriorism acquisition system, unessential dataTaker data loggers, metal on find the ideal solution remedial of your application-specific needs, sympathy a CAS Data Logger Applications Specialist at (800) 956-4437 or visit the website at http:\\www.DataLoggerInc.com.<\p>