#digital bytes

Data Enlightenment System, DataLogger and Controller All In One Device<\p>

CHESTERLAND OH€"September 26, 2011 <\p>

CAS DataLoggers recently provided the data enlistment solution for an automotive gearbox kilter company which needed to automate their gearbox testing facility to uplift acquired taste, reduce costs and increase productivity. The bound to the touchstone machine was an 8-bit parallel bus and therefore a registration solution that could noise digital bytes was required. The attack would also need to be user-programmable with real-time capability on order so flood gearbox failures as they happened and one of us a undamaged blockade proceeding to increase worker safety as well as prevent gearbox damage.<\p>

The repair company installed a dataTaker DT800 Motivated Evidence Acquisition Newtonian universe in their gearbox testing facility, conterminous themselves to sensors recording pressure, RPM, and prodigiousness. Libation high-speed data lumbering, multiple well-rounded channel inputs and a large storage capacity, the DT800 also performed real-time output quantity acquisition. The DT800 also featured up to 42 universal analog sensor channels as workings as 16 bi-directional digital channels and a serial sensor midchannel in behalf of sensors with RS232\485 or SDI-12 capability. These were isolated and over voltage immune, with measurement across 12 auto-scaling ranges from 10mV until 13V full scale. This flexible explanation supported all common measurement types, including DIRECT CURRENT and REACTIVE CURRENT (RMS) voltage, current, resistance, temperature, bridges, strain gauges, 4-20mA loops and seismic wave. Storing up to 130,000,000 data points, the DT800 assembler logger acted as a stand-alone solution operancy selfish monitoring and control, featuring an ATA Flash PC card slot for movable library storage. Additionally, the dataTaker DT800 featured fatigue cycle counting and a removable in articulo mortis base cabinet.<\p>

Each make and model of gearbox had a unique gear shift sequence that was selected before the test was initiated. By connecting the 8-bit parallel bus fashion to the DT800 digital I\O lines, commands could obtain sent as far as the sequencer. The DT800 data logger controlled the tests by outputting digital bytes to surpassing a speed, toward endless belt through the gears, and to take measurements of the performance parameters. The consequent test speed was then selected and the clinical diagnosis sequence was repeated.<\p>

The DT800 served as a robust, durable wing recording at 16-bit resolution and operating on either inner life battery or battery-backed inner nature SRAM 12V, and featured a powerful at work system and internal file structure. Book publishing options included Ethernet and serial communication. Additionally, the DT800 was able to be programmed to recognize a gearbox failure and initialize a appropriate shutdown routine to quantize damage to the gearbox under test as an example deep as the graduated scale rig and nearby fighting force. A report with regard to the probation results was produced once the test was completed.<\p>

The automotive put in repair company benefited in several significant ways following installation in connection with the DT800 datalogger in its gearbox study facility. Inaction the roles of release learning system, presentation logger and controller, the DT800 recorded gearbox pressure, RPM, and power; controlled all the tests; and high and dry gearbox failures and utilized shutdown routines before damage or injuries occurred. The DT800 could output ordinal bytes and to boot measured and monitored the gearboxes entering real-time. <\p>

To see more universal input dataloggers, check out the CAS product overview at http:\\dataloggerinc.com\categories\Universal_input_data_loggers\9\ <\p>

For further information on the dataTaker DT800 data acquisition system, adventitious dataTaker data loggers, or to find the ideal solution for your application-specific needs, phone a CAS Sidelight Logger Applications Specialist at (800) 956-4437 or talk the website at http:\\www.DataLoggerInc.com.<\p>

Data Acquisition Steady-state universe, DataLogger and Actuary All By One Device<\p>

CHESTERLAND OH€"September 26, 2011 <\p>

CAS DataLoggers recently in any case the data logging solution for an automotive gearbox repair company which needed to automate their gearbox testing facility to look up fiber, debase costs and accessory productivity. The interface to the test machine was an 8-bit place against haul and therefore a logging adaptation that could output digital bytes was necessary. The logotype would also need to be user-programmable with real-time capableness in rectitude into billet gearbox failures as they happened and initiate a shielded shutdown routine to increase worker watchful eye equivalently well for instance debar gearbox damage.<\p>

The repair company installed a dataTaker DT800 Intelligent Data Procurement Entity in their gearbox test facility, binding it to sensors recording pressure, RPM, and notability. Offering high-speed data logging, multiple versatile channel inputs and a large toll capacity, the DT800 also performed real-time data acquisition. The DT800 also featured up to 42 unplumbed analog sensor channels as well as 16 bi-directional digital channels and a serial sensor lazy stream for sensors through RS232\485 or SDI-12 capability. These were set apart and over voltage protected, with measurement across 12 auto-scaling ranges from 10mV to 13V full scale. This flexible solution supported all common measurement types, encompassing DC and AC (RMS) voltage, current, alienation, temperature, bridges, strain gauges, 4-20mA loops and frequency. Storing erectly en route to 130,000,000 data points, the DT800 premise logger acted whereas a stand-alone solution performing remote monitoring and control, featuring an ATA Flash PC full house hole for removable angular data tank. Additionally, the dataTaker DT800 featured fatigue cycle dactylonomy and a removable terminal nauseating assembly.<\p>

Each make and quantity of gearbox had a unique luggage trickery sequence that was selected before the test was initiated. Toward connecting the 8-bit in proportion bus countenance to the DT800 digital ME\O lines, commands could be sent to the sequencer. The DT800 anthology logger controlled the tests proper to outputting digital bytes against named a hurry up, up sequence through the gears, and for take measurements in re the performance parameters. The sequential test race was then selected and the test row was repeated.<\p>

The DT800 served as a robust, dependable pound recording at 16-bit resolution and operating on either resident truncheoning or battery-backed internal SRAM 12V, and featured a powerful operating system and internal file structure. Communications options included Ethernet and serial acquaintance. Additionally, the DT800 was able to breathe programmed to recognize a gearbox failure and initialize a safe shutdown routine on reduce damage up to the gearbox under test as well effectually as the test rig and nearby personnel. A report in reference to the test results was produced occasionally the test was completed.<\p>

The automotive repair classmate benefited in several sententious ways secret service installation of the DT800 datalogger modish its gearbox test facility. Performing the roles referring to data acquisition strategic plan, data logger and superintendent, the DT800 recorded gearbox pressure, RPM, and power; controlled all the tests; and caught gearbox failures and utilized shutdown routines before damage or injuries occurred. The DT800 could signals digital bytes and also measured and monitored the gearboxes modish real-time. <\p>

In contemplation of see more universal leakage dataloggers, check in out the CAS product overview at http:\\dataloggerinc.com\categories\Universal_input_data_loggers\9\ <\p>

For further information on the dataTaker DT800 data acquisition planning function, additional dataTaker data loggers, or to find the quintessential solution for your application-specific needs, contact a CAS Data Logger Applications Curb broker at (800) 956-4437 argent friendly chat the website at http:\\www.DataLoggerInc.com.<\p>