Leading Australian hot-dip galvanising service provider, specialising in protecting steel structures with high-quality, compliant finishes.

Contact Info: Address: 117–153 Rookwood Road, Yagoona, NSW 2199, Australia E-mail: [email protected] Phone: 02 9707 5081 Website: https://galserv.com.au/

Zinga can be used in dip-tanks for fast application onto blast-cleaned or phosphated steelwork. Where the steelwork is to be phosphated, it must have a minimum weight of 1200 – 1500g/m2. The viscosity of the liquid zinc in the tank will determine the final dried film-build of the zinc layer.

Items should only be dipped once, and never double-dipped, as this causes slight waves on the zinc surface.

The zinc can be force-dried in either low-bake ovens @ 40degrees C or in a standard powder-coat oven @ 180 – 200 degrees C.

Short-wave infra-red ovens dry the zinc-film in 2 minutes.

After dipping in the zinc tank, articles can be sent straight through the oven without waiting for a flash-off period. Once the dried Zinga-coated items leave the oven and cool down to below 50 degrees C they can be coated with powder or wet paints.

Galvanising Gerrard & Ball watching – Sportscene pundits on Rangers’ draw with Aberdeen

After much anticipation Steven Gerrard made his Scottish Premiership bow as Rangers manager.

James Tavernier’s penalty put his side in front after they had lost Alfredo Morelos to an early red card.

However, he was denied the three points after Bruce Anderson’s late equaliser for the home side.

Sportscene pundits Steven Thompson and Michael Stewartwatch…