HOW TO QUICKLY DRAW THE SAME BORDERS OVER AND OVER AGAIN by studying-engineering So there would be times that you will have lots of pages per plate and drawing the border consumes much of your time. I would share to you my engineering hack of how to quickly draw the same borders :) Hope this would help you :) 1. Use the previous border that you made. The first border would have exact measurements that you want, so you have to make one which will serve as your template. 2. Mark the essential corners. Mark the essential corners which you will use as guide to know where you will start and stop inking. 3. Connect the dots :) connect the horizontal dots, then the vertical dots or vice versa. 4. For the small boxes of the lower side of the plate, mark one side of the line according to their respective distances. 5. Use a right triangle for accuracy and precision that you make a straight line perpendicular to the other line. So there it is. I really don't care if there would be slight changes in the measurement of the border, as long as the lines are straight, parallel and perpendicular to each other, because, it would be less likely to happen that the professor will measure every border that he is going to check, which includes your classmates works and other sections works :)
