#electriclinearmodule

There are four drive technologies that cover the vast majority of linear motion applications: ball screw, timing belt, rack and pinion, and linear motor. Each one converts energy into straight-line movement differently, and those differences determine everything — how fast the carriage moves, how precisely it stops, how much force it can push with, how long it runs before it needs attention, and how much the whole thing costs. If you're wondering how To select The Right Linear Module for your needs, this article will help answer that question. This guide covers all four in depth. By the end, you'll know exactly what each drive mechanism is good at, where it falls short, and which applications belong to which technology.

What a Linear Module Actually Is, and How To select The Right Linear Module?

A linear module is a self-contained mechanical assembly that produces controlled linear motion. The core components — a guide rail, a drive mechanism, a carriage, end plates, and mounting features — come pre-assembled and ready to integrate. Connect a motor (or, in the case of linear motors, a power supply and drive), mount the module to your frame, and you have a functional linear axis. The guide rail carries the load and defines the path. The drive mechanism is what moves the carriage along that path. The four technologies below each handle the drive function in a fundamentally different way.

1. Screw Linear Module

The Mechanics Screw linear modules use a rotating screw — either a precision ball screw or a sliding-contact lead screw — as the drive element. A motor turns the screw, and a nut fixed to the carriage converts that rotation into linear displacement. The pitch of the screw thread (how far the nut advances per revolution) directly determines the relationship between motor rotation and carriage position. Ball screws use recirculating hardened steel balls between the screw shaft and the nut to reduce friction and virtually eliminate backlash. Lead screws use a polymer or bronze nut in direct sliding contact with the thread — simpler and cheaper, but less efficient and less precise. Where Screw Modules Excel Positioning accuracy is the headline advantage. A precision ball screw with C3 or C5 grade tolerances, paired with a capable servo, delivers bidirectional repeatability in the ±0.005–0.02 mm range. For applications involving laser marking, dispensing, semiconductor wafer handling, optical component alignment, or medical device assembly, this level of positional control is not a luxury — it is a hard requirement. Force output is the other major strength. The thread geometry creates mechanical advantage. A relatively modest motor can generate substantial thrust force at the carriage, making screw modules effective for pressing, clamping, injection, and vertical lift applications. The screw does the force multiplication that would otherwise require a much larger motor. Lead screws add a unique property: self-locking. A lead screw with a shallow helix angle will hold its position when the motor is de-energized, without any external brake. For vertical axes carrying a load, this is operationally and safety-relevant — the axis stays put during an e-stop or power loss. Screw modules are also predictable. The mechanics are well-understood, maintenance procedures are established, and spare parts are universally available. For machine builders who need a reliable, proven, cost-effective precision axis, ball screw modules have decades of real-world evidence behind them. The Trade-offs Speed has a hard ceiling. As the screw spins faster, it approaches critical speed — the rotational frequency at which gyroscopic effects cause the shaft to whip. This limits both maximum velocity and practical stroke length. A 16 mm diameter ball screw at 1,000 mm stroke typically maxes out around 500–800 mm/s. That covers a wide range of applications but falls well short of what belt or linear motor systems can achieve. Long strokes become expensive. Longer screws require tighter straightness tolerances to maintain accuracy, are heavier and more costly to manufacture, and are more prone to sag and deflection. Beyond roughly 1,500–2,000 mm, screw modules become difficult to justify economically unless precision truly requires them. Maintenance is ongoing. Ball screws need periodic lubrication. In contaminated or high-duty-cycle environments, sealing and maintenance intervals must be actively managed to protect accuracy and service life.

2. Belt Linear Module

The Mechanics A belt linear module drives the carriage with a closed-loop timing belt — typically polyurethane with steel or Kevlar cord reinforcement — running between two pulleys at opposite ends of the module. The motor drives one pulley, the belt engages the toothed profile, and the carriage (clamped directly to the belt) travels with it. Belt tension determines system stiffness and accuracy. Most quality belt modules include a tensioning adjuster. Over the life of the module, belts stretch gradually and require retensioning or eventual replacement. Where Belt Modules Excel Speed is the defining strength of belt drives. Traverse speeds of 2,000–5,000 mm/s are standard, and high-performance configurations push considerably beyond that. For applications like high-speed pick-and-place, packaging automation, inkjet carriage systems, and transfer lines where cycle rate drives profitability, belt modules are the natural starting point. Long strokes are easy and economical. Because the belt is a continuous loop rather than a rigid shaft, there is no critical speed issue analogous to a whipping screw. Belt modules at 3,000–6,000 mm stroke are off-the-shelf products. Custom builds go longer. For large-format gantries, flatbed printers, CNC routing tables, and automated storage systems, belt drive covers the travel distance without a cost penalty. Smooth, quiet operation. Belt compliance absorbs minor mechanical irregularities and damps vibration. Belt modules run more quietly than gear-driven systems, which matters in environments like medical laboratories, food processing areas, or consumer-facing equipment where mechanical noise is undesirable. Cost efficiency at long strokes. When high precision is not required and the stroke is long, belt modules typically deliver the best performance-per-dollar ratio of any mechanical drive technology. The Trade-offs Accuracy has a practical ceiling. Belt compliance and thermal expansion introduce positioning variability that screw systems avoid. Belt modules typically achieve repeatability in the ±0.05–0.1 mm range. For pick-and-place or material transport, this is entirely adequate. For precision machining or measurement, it is not. Belts wear and stretch. High-cycle applications consume belts. Stretch affects positioning consistency over time. Maintenance planning must account for periodic retensioning and belt replacement intervals. Thrust force is limited. Belt drives are optimized for moving moderate payloads quickly, not for generating push force against resistance. For applications involving pressing, clamping, or working against significant back-pressure, belt drives are under-matched. Vertical axes require a brake. Belt drives will back-drive under gravity. Motorized brakes or counterbalance systems are required for any vertical application where the load must hold position when power is removed.

3. Rack and Pinion Linear Module

The Mechanics A rack-and-pinion system uses two mating gears: a linear gear (the rack) fixed along the travel path, and a rotating gear (the pinion) attached to the motor or gearbox output shaft. As the motor turns the pinion, it rolls along the rack, driving the carriage — with the motor and pinion mounted to it — forward or backward. This is the inverse of screw and belt arrangements: the drive element (motor + pinion) travels with the carriage, while the rack stays fixed. Rack segments can be bolted together end-to-end to extend the travel path to virtually any length. Where Rack and Pinion Excels Stroke length is effectively unlimited. This is the singular technical advantage that makes rack-and-pinion irreplaceable in heavy industrial automation. By adding rack segments, any travel distance becomes achievable. Systems spanning 10, 20, or 50 meters — gantry robots, plasma cutting tables, floor-mounted linear axes, automated warehousing cranes — are engineered with rack drives as a matter of course. High speed and high force are available simultaneously. With appropriate gearbox selection, rack-and-pinion combines fast traverse speeds with the ability to push or carry heavy loads. This combination is difficult to achieve with screws (force-limited on speed) or belts (speed-capable but force-limited). Heavy payloads and side loads. Metal-on-metal gear contact gives rack-and-pinion mechanical stiffness that belt systems cannot match. Rack systems handle heavy tooling, multi-axis head assemblies, and shock loads without the compliance concerns that limit belt-driven designs. Modular and scalable. For machine builders designing large systems, rack-and-pinion provides a straightforward path to scaling up. The architecture does not fundamentally change between a 3-meter and a 30-meter axis. The Trade-offs Backlash is inherent. Standard gear meshes have clearance between teeth, which creates bidirectional positioning error — the carriage arrives at slightly different positions depending on the direction of approach. Anti-backlash solutions (dual-pinion assemblies with preload, helical rack-and-pinion pairs, or precision ground racks) reduce this significantly but add cost. For applications requiring tight bidirectional repeatability, rack-and-pinion demands more engineering attention than screw systems. Noise and vibration. Gear mesh is louder than belt or screw operation, particularly at high speeds or as components wear. This is rarely an issue in heavy industrial environments but worth considering in noise-sensitive installations. Lubrication and exposure. Open rack systems need regular lubrication and protection from contamination. In environments with chips, dust, or chemicals, rack covers and maintenance schedules must be designed in from the start. Overkill for short strokes. On compact machines with strokes under a meter or two, rack-and-pinion adds cost and complexity without meaningful benefit over a screw or belt drive.

4. Linear Motor Linear Module

The Mechanics Linear motor modules are fundamentally different from the three mechanical drives above. There is no screw, no belt, and no gear — no rotary-to-linear conversion of any kind. A linear motor generates force directly along the axis of travel through electromagnetic interaction between a primary (the coil assembly, or forcer) and a secondary (the magnetic track, or platen). The most common type is the linear synchronous motor (LSM), where the forcer carries wound coils and the track carries permanent magnets. Varying the current in the coils creates a traveling magnetic field that the forcer follows. An ironless linear motor uses a coil assembly without a steel core, eliminating the attractive force between forcer and track and producing extremely smooth, cogging-free motion. Iron-core linear motors use a laminated steel core for higher force density at the cost of some cogging. Precision linear encoders mounted along the track provide position feedback. There is no mechanical contact between the moving and stationary elements other than the guide rail bearings. Where Linear Motors Excel Speed is in a different league. Linear motors routinely achieve speeds of 3,000–5,000 mm/s, and high-performance systems reach 10,000 mm/s or beyond. No mechanical drive element intervenes between the motor force and the carriage, so the speed ceiling is determined by the drive amplifier, the encoder, and thermal limits — not by any gear, screw, or belt. Acceleration is extraordinary. Because the moving mass is low (just the forcer and carriage, with no transmission inertia), linear motors can achieve accelerations of 5–10 g in standard configurations. This is what enables the extreme throughput in semiconductor lithography systems, high-speed laser processing, and advanced electronics manufacturing equipment. Nanometer-level precision. Remove the mechanical transmission and you remove the transmission errors — screw lead variation, belt stretch, gear backlash. With a high-resolution linear encoder, linear motor systems achieve positioning repeatability in the sub-micron to nanometer range. This is the technology behind wafer steppers, precision metrology equipment, and high-end coordinate measuring machines. Zero mechanical wear in the drive. There is no physical contact between the primary and secondary in the magnetic gap. Nothing wears, nothing needs lubrication, nothing needs to be replaced due to fatigue. The guide rail bearings are the primary wear components. In cleanroom environments, pharmaceutical manufacturing, or semiconductor fabs where contamination from lubricants or wear particles is intolerable, this is a decisive advantage. Smooth, ripple-free motion. Ironless linear motors produce motion without cogging or velocity ripple, critical for applications involving surface finish quality, optical scanning, or wafer inspection where micro-velocity variations translate directly into output errors. The Trade-offs Cost. Linear motor modules are significantly more expensive than mechanical drive alternatives — often by a factor of three to ten, depending on the technology tier and stroke length. The permanent magnet track, precision encoder, and high-bandwidth drive amplifier together represent a substantial capital investment. This cost is justified in high-value applications; for general automation, it is difficult to defend. Thermal management. The forcer generates heat. In continuous-duty or high-force applications, thermal growth in the forcer assembly can introduce positioning errors if not actively managed. Many linear motor systems require water cooling, which adds infrastructure cost and complexity. No self-holding force. When power is removed, a linear motor provides no resistance to carriage movement. For vertical axes, active brakes and counterbalances are mandatory. For any application where the load must hold position during a power loss event, additional safety engineering is required. Magnetic field exposure. The powerful permanent magnets in the track attract ferrous debris and can interfere with nearby sensors, electronics, or tooling. Machine design must account for magnetic field management, particularly in environments with metal chips or magnetic components. Requires a high-quality encoder. The performance of a linear motor system is only as good as the position feedback. High-resolution linear encoders add cost, require careful installation, and must be protected from contamination to maintain accuracy.

Complete Comparison at a Glance so you know How To select The Right Linear Module

Factor Screw Belt Rack & Pinion

Linear Motor

Positioning accuracy

±0.005–0.02 mm ±0.05–0.1 mm ±0.02–0.05 mm

Sub-micron to ±0.001 mm

Max practical speed

500–1,000 mm/s 2,000–5,000 mm/s 1,000–3,000+ mm/s

3,000–10,000+ mm/s

Acceleration

Moderate Moderate–high Moderate

Very high (5–10 g)

Max stroke length

~1,500–2,000 mm ~3,000–6,000 mm Virtually unlimited

~2,000–4,000 mm (standard)

Thrust / force output

High Low–moderate High

Medium–very high

Payload capacity

Medium–high Low–medium Very high

Medium

Mechanical wear

Yes (screw/nut) Yes (belt) Yes (gear teeth)

No (drive contact-free)

Lubrication required

Yes No (belt tensioning) Yes

No

Self-locking

Lead screw: yes No No

No

Noise

Low–medium Low Medium–high

Very low

Cleanroom suitability

Limited Moderate Poor

Excellent

System cost Low–medium Low Medium

High–very high

Best stroke range

Short–medium Medium–long Long–very long

Short–medium

How to Match Technology to Application

The right decision comes down to four variables that every application has in fixed combination: required accuracy, required speed, stroke length, and payload/force. Precision assembly, dispensing, inspection, and medical devices: ball screw modules. The accuracy and force output are here,and technology is cost-effective and field-proven. High-speed pick-and-place, packaging, and material transfer:belt modules. Speed and long stroke at reasonable cost. Accuracy is adequate for the task. Large gantries, heavy machine tools, warehousing, and floor-track robots: rack and pinion. The only mechanical drive that scales to long strokes with heavy loads. Semiconductor manufacturing, lithography, laser processing, precision metrology, and electronics test equipment: linear motor modules. It is also worth noting that multi-axis machines regularly combine technologies: a large plasma table might use rack-and-pinion on the long gantry axis and a belt or screw drive on the shorter cross axis. A semiconductor handler might use linear motors on the fine-positioning stage and ball screws on the coarser transport axes.

Final Thoughts on Selecting The Right Linear Module