#diyesk8

Max power:4200W

Motor KV:110KV

Max Current:100A

Voltage:6-18S

Max torque:9.5N.M

Dual Fsesc75100 With Aluminum PCB

Voltage:14-84V(4-20Ssafey)

Current: continuous max 100A

Remote: Flipsky VX4

3 speed modes,color screen,type C charging,throttle sensitivity adjustable,Cruising,Motor reversing,Software update etc.

Battery: lipo 18S 25Ah

6" AT wheels*4pcs

2.Motors mounting

(1) Put the motors in the proper position of the motor mount, install the 10mm15T pulley + set screws, and fix the motors with M4 screws, not lock.

(2)Put on the 355mm belt and install the 6" AT wheels.  Lock the M4 screws and the screws fixing the wheels after the motors on both sides are adjusted to the proper position.

(3)Wires connection:Dual fsesc75100 connect to 6 motor wires , hall wires connect,two battery wires(red&black) connect to battery wire.

3.Parameters setting in VESC Tool

(1)Connect USB to dual fsesc75100 , open VESC Tool firmware 5.2 in Computer.

(2)AutoConnect

(3)Setup Motors FOC→Battery Cells Series 18→Battery Capacity 25 Ah →Motor pulley:15→

Wheel Pulley:66→Wheel Diameter:150mm

4.Remote VX4 control

(1)Turn on the remote and enter into pairing mode

(2)Connect the receiver to esc

(3)Pairing succeed and control the electric skateboard.

VX4 tutorial:https://www.youtube.com/watch?v=u9_YLYHYHI0

See more details and riding in this video:

This is a little motor with a lot of power and a clean, tight appearance. The Flipsky Electric Skateboard 7070 Motor Battle Hardened will not only keep boarders moving with grace and speed, but it will also maintain our skateboard looking nice. The exterior of this device has a nice polish that keeps the motors dust-free. For further durability, it has a robust shaft and a laminated steel starter.

This motor features a sturdy and dependable mechanism. It boasts an 9.5Nm torque and speed, allowing for smooth acceleration. Its maximum output wattage of 4200W and maximum current of 100A make it even more powerful.

This product is compatible with electric skateboards, as well as electric bikes, surfboards, and other similar devices.

With a load, each motor can take 95A peak current.These statistics, along with the 110Kv rating of this device.The motor also has a lot of torque. Because these factors are nicely balanced, your electric skateboard will perform well.