Air and dirt separators protect the boilers, pumps and fittings from damage caused by the deposit of dirt particles, increase comfort and improve the yield. Get yours from Galaxy Arabia and make sure your HVAC lasts longer. Know more about our products: http://www.galaxyarabiame.com/air-separator-degasser/

Air separators and degassers are highly used devices in industries. Basically, an air separator or a degasser is a device that is in-line which removes the micro bubbles or the air flowing with the fluid. The systems of liquid that are closed having the entrained air or gas would drain off with the liquid. It has various disadvantages as well such as decrease in the capacity of pump; the hydraulic hammer’s risk might increase and would give inaccurate results of measurement. Therefore, these air separators and degassers separates as well as removes all the gas and air present in the fluid in order to protect the liquid system and obtain reliable results of measurements.

Not only this but it also help in removing corrosion from the pipe as well as the sludge formation, reduces air block chances and also removes the impurities that are heavier than water from the pipe.

Let’s see how it works. The air separator or the degasser contains a tangential inlet pipe present in the vessel’s upper part along with a tangential outlet present in the vessel’s bottom part. According to the requirement, the inlet and outlet orientation can be adapted. The vessel’s shape with the incoming liquid’s speed creates a centrifugal force. The liquid is then forced towards the vessel’s wall through the centrifugal force and the tangential inlet, and the air or gas is removed due the density difference to the vessel’s center. Now, the liquid is air and gas free and after a number of rotations the liquid through the tangential outlet leaves the vessel.