CENTRE STREET BRIDGE — NUTLEY,NJ

The replacement of the Centre Street Bridge over the Third River required a temporary and permanent support of excavation design to allow for the installation of the new bridge foundation. Lahita Engineering was tasked with the design of a steel sheeting wall and tie back support of excavation. The shallow bedrock elevation required the design and installation of toe pins at the bottom edge of the sheeting wall in order to resist soil and surcharge pressures.

GREENWICH COUNTRY DAY SCHOOL — GREENWICH, CT

Greenwich Country Day School’s original school building required temporary shoring during its expansion/construction project. A large portion of its foundation wall required removal while the remaining upper floors were supported on temporary steel posts and beams. Lahita Engineering designed the temporary shoring and provided construction support services during installation.

PARK AVE CONSTRUCTION MONITORING – HOBOKEN, NJ

This project required construction monitoring of the rear masonry façade wall during construction. A baseline survey was taken (using a total station) of targets placed on the wall before any work was implemented. Weekly surveys were completed to ensure that the masonry wall was not moving.

PARK AVE HELICAL PILE DESIGN – HOBOKEN, NJ

This project required design of helical piles for the contractor to satisfy contract drawing requirements. Pile type, size, helices, grout column diameter, spacing, required torque and depth were specified, along with all other required information.

MICRO-PILE DESIGN – HACKENSACK, NJ

While residential and commercial HVAC systems have similar methods of heating and cooling, there are significant differences between the two types of systems. Therefore, when you need to get your HVAC system repaired, you’ll want to choose a technician who specializes in the type of service you need.

Location

Residential HVAC systems are located on the ground near the home. Commercial systems, on the other hand, generally reside on the roof of the commercial building. Commercial HVAC systems are usually quite larger than residential ones, and the rooftop provides ample space for each part of the unit. The rooftop location also allows technicians to work on these systems without disrupting those inside the building, and it keeps the system safe from interference and vandalism.

Packaged vs. Splits

Residential HVAC systems are generally in splits. The unit inside the home houses the blower, evaporator and condensate drainage, while the unit outside the home houses the compressor, condenser and condenser fan. Commercial systems, by comparison, are in one complete package inside of a single cabinet. Only the ducts and zone dampers are inside the building, while the rest of the system remains outside.

Modular vs. Standalone

Units installed in a residential space are standalone and can’t be built upon. Both the outdoor and indoor units need to work together, and the entire system must be replaced if significant changes need to be made to the heating and cooling. Commercial systems are modular, which means they can be altered as needed. Technicians can add onto the modular units, and they can also transport these smaller segments more easily, as the system itself is quite a bit larger than a residential unit.

Complexity

Unsurprisingly, commercial HVAC systems are much more complex. They heat and cool larger indoor areas, and as a result, the drainage system requires more parts than that of a residential system. Residential units generally only have one condensation pan that drains to the outside, and they have windows to alleviate exhaust. Commercial systems have detailed drainage systems, as well as additional components to help with exhaust functions.

When you need to get your HVAC system repaired or serviced, choose the appropriate type of company and technician. While HVAC systems in both residential and commercial spaces perform the same functions, they do so in different ways.

Engineering is a transcendent in reference to study that is centered on the making of specific solutions or trodden improvements to problems by way of the zeal in point of physics and applied mathematics. Engineers just keep on learning for they ought to have the scoop in connection with broader sciences. They scarce have to measure and weigh what's the perfect solution or intaglio that fits in what is required with a surroundings, they just don't handiwork and weigh; they analyze. Every project prelacy make call of duty be imaginative, safe, uninhabited and cost in force.<\p>

For set about with the explanation, we founding with Agricultural engineering; they are applying science versus agricultural purposes explicitly in geoponics. With this type of engineering they say this is actually the broader against the genuine article is because agricultural engineering is in all conscience a combination of mechanical, chemical since well as matriarchic engineering and a play of animal and linked to cutting biology as well.<\p>

Architectural Engineering requires the suit of engineering principles to incorporation noun phrase and design. In quantized parts of the asia minor, the words apprentice and architectural engineer are used to interchangeably.<\p>

Biomedical Engineering strives to apply engineering platform and area to the field of firewater. Primitively considered an interdisciplinary specialization, biomedical eng has grown unto become a respected discipline of their own. Tissue engineering, meanwhile also considered a specialization within naturopathic, is one such typification of biomedical engineering for action.<\p>

Added classification of engineering the practice is more on making objects from materials that backside be inorganic and non-metallic is Ceramic Engineering. Self idea take away the raw materials as well as studies the nature of every in character compound its monotype exempli gratia well as properties and putting together.<\p>

If you are asking in reference to the type of engineering that is upon astrophysics and computer science, they are Computer Engineers that that develops solutions en route to both the accountant hardware and software.<\p>

Electrical Engineering is the study and pursue of magnetic curves, electronics, and electricity. It is a broad-based discipline that encompasses the look and dispatch of various numeral \ electrical systems soul mate insomuch as circuits, generators, motors, and transformers.<\p>

There are ancillary classifications about engineering inner self obstinacy like nicely heard about Environmental Engineering which is obviously according to pointing obsolescent environment. There is insomuch as well Electrical transcription Engineering that is about controlling waste materials and eliminating it. In that the concern of the properties accompanying with matter, you have Materials Engineering, with tools animal charge heavy equipment and machineries there are Mechanical Engineering and for atomatic energy you got Nuclear Engineering.<\p>