#chicagoplumbers

Every home needs water. We need water for cooking, cleaning, and personal sanitation. It would be impossible to live in a modern home without water running inside its structures. But to have access to that water, you need a system to deliver clean water to the house and take away the dirty water. That is what the plumbing system in your home does.

A home’s plumbing system consists of hundreds of feet of pipes with valves, connections, and other components. It is one of the most complicated and most used systems in the home. As a result, problems with the plumbing system are among the most common issues homeowners in Chicago encounter. 

Plumbing problems are one of Chicago homeowners’ biggest issues because:

They are hard to detect. The typical way homeowners discover an issue with their plumbing is when the water supply stops or water goes where it is not supposed to. But before the problem goes that far, it will show subtle signs that go undetected. 

They cost a lot of money to fix: Plumbing issues often cost a lot of money to repair. That is not because of the cost of fixing the damaged components. Instead, it is due to the cost of repairing the damage the issue has done to the surrounding areas.

That is why plumbing problems are best discovered early and solved on time. Finding a problem before it causes damage to the structures of your home can save you hundreds of thousands of dollars, says Income Realty Corporation. To do this, you need to know the common plumbing problems you are likely to face in your Chicago home and what you can do to solve them.

Five most common plumbing problems in Chicago homes

These five problems top the list of plumbing issues occurring in Chicago homes.

Drain clogs

A drain clog is a common occurrence in the home, and it can happen in different parts of the plumbing system. Drains get clogged when an item or material obstructs drain pipes. That occurs in the kitchen sink or bathroom drain. Drain clogs can be minor issues requiring a few minutes to solve, or they can be leading problems that require special equipment and lots of time. You can clear most clogs by using a plunger, drain snake, or running the disposal unit. If these DIY solutions don’t work, it will be necessary to contact your local plumber.

Frozen pipes

Water has the odd behavior of expanding when it freezes. That can be a problem for your plumbing system. Frozen water inside pipes will not only cut off your water supply, but it can also cause the pipes to rupture. It takes only a few hours of below-freezing temperatures for pipes to freeze. The best way to keep pipes from freezing is to install PEX pipes in the home or take precautionary steps to keep water flowing through the pipes. If you find that the pipes in your home are frozen, the best solution is to call a plumber who specializes in repairing burst pipes.

Water leaks

Leaks are another major issue. This problem results from the highly mobile nature of water and its corrosive powers. Over time water will erode any material it is flowing. Water also carries particles and chemical substances that get deposited inside pipes. These two effects can result in pipes bursting or wearing out, causing leaks. Water leaks also happen when water pressure is too high or frozen pipes thaw out. Leaks are a crucial problem because they often occur inside the walls and damage your property. The best way to prevent leaks is to inspect the plumbing system regularly and install a leak-detection system.

Water heater issues

Water heater malfunctions are among the most annoying plumbing problems; think what it feels like to get cold water dumped on you when trying to take a warm shower in the morning. Water heater issues will also deny you access to warm water for washing dishes and clothes. Several issues can cause water heater malfunctions, leaks, water hardness issues, and faulty components. The best way to prevent issues with the water heater is to be aware of its life expectancy and know the telltale signs of problems with the equipment. Water heater issues should never be DIYed; always call your plumber for any kind of water heater repairs.

Sewer line problems

Have you ever imagined what life would be like if you did not have potable water running in your home? Would modern life exist if you had to dig a well and every time you needed water, go to the well and manually fetch water from it?

The water that flows in your home is a lifesaver and the pipes that make it possible for that water to reach your home are a lifeline. Without those pipes, you would not have the convenience of a modern home with water on demand, explains Keyrenter Hampton Roads.

But this fact is not always obvious because your home’s water line is out of sight. Homeowners tend to forget that this vital part of the home’s plumbing also requires attention. Your water line is subject to many of the same issues that the rest of your plumbing is.

The water line can get damaged. It can get old or the very water that runs through the water line can corrode the pipes and make them less efficient. If your water line collapses, your ability to do simple household tasks will come to an abrupt end.

But this doesn’t happen often because water lines are designed to be sturdy and can go for many years without any signs of trouble. But this is also why water line issues are costly to fix. The problem can build up for years, only to be discovered after it has done maximum damage.

This is why it is important to always make sure your water line is in good condition. You need a competent local plumber to inspect the system periodically and make sure everything is as it should be. You should also know the potential problems that can happen with your water line.

What are the common water line problems that require repair or replacement?

Old pipes or regular wear and tear

If your home is old and the pipes have not been replaced since the house was built, you can expect more water line problems. Firstly, your water line may have metal pipes that are more prone to corrosion. Secondly, a lot of the other factors listed below may be affecting the pipes.

Tree roots intrusion

Tree roots can damage your water line either by dislodging it or by penetrating the pipes. The latter problem is more common when the pipe already has a leak or weak point. But pipes that are dislodged by tree roots may eventually start to leak also.

Poor installation and human error

If pipes are not installed by a professional or according to the proper procedures, you will have issues with the water line. Water lines may also be damaged if heavy equipment is driven over the ground where pipes are buried. This can also happen if someone digs in the yard and accidentally damages the pipe.

High water pressure

Excessively high water pressure is more damaging to your plumbing than low water pressure, although the latter problem is more likely to get your attention. High water pressure causes vibrations inside pipes that can damage the water line or home appliances and cause leaks.

Soil movements

Upward or downward movement of the soil surrounding your water line can dislodge the pipes and cause you all kinds of problems. These movements are often unforeseen at the time the pipes were laid. Also, there may be no practical way to predict or prevent these ground movements or seismic activity.

Sediment buildup and mineral deposit

If the water in your city is hard, the water line will be more susceptible to this particular issue. The mineral content of water, along with other impurities, will be deposited inside your pipes as water travels through them. Over time this can narrow the diameter of the pipes and make them more likely to burst and leak.

Accumulation of dirt inside the water line

This does not typically happen unless the water line is broken. If the line is cracked anywhere along its length, dirt from the surrounding soil can find its way into the pipes. You can usually tell when you have this problem because the water coming into your home will be discolored.

Frozen water

This is a common issue in areas with harsh winters. If the water line has ever frozen or come close to freezing, the structural integrity of the pipes may be compromised. Freezing water will stress the pipe as the water inside the pipe expands, making the water line more likely to burst or leak.

Water leaks

The water line can leak as a result of the problems listed above or for unknown reasons. Water line leaks are not as easy to detect as leaks inside your home. If you notice spikes in your water bill without any changes in your water usage, you may have a leak in your plumbing systems, possibly in the water line.

Rodent damage

For buildings of all kinds – commercial as well as residential – periodic hydro-jetting is one of the most effective ways to maintain the function and structural integrity of the drain systems. This is especially true when that building is a restaurant or commercial kitchen.

In a typical day’s work, massive amounts of broth, grease, and food waste find their way into your restaurant’s drain system. But just because the grease and food you flush into the drain disappear from view don’t mean they actually go away.

Most times these materials settle inside the drainpipes and eventually clog them, making it hard for water and other materials to pass through. As the Dodson NOVA team explains, short and long term effects of clogged pipes are drain blockages, unsanitary conditions, and pipe damage.

The buildup of grease and other materials inside your restaurant’s drains will cause the following problems:

Inefficient drains: 

The drains in a restaurant will become slow and make strange noises when they are clogged. This doesn’t do any good to the image of your restaurant because customers view such things as signs that a business is not well-managed.

Sanitary problems

Clogged drains draw pests – rats, mice, roaches, and ants – into the building. The possibility of bad odors from the drains also increases with clogs. The worst sanitary issue from clogged drains is when you start to have drain backups.

Clogged drainpipes hurt your business because you may eventually have to close shop to deal with the issue. If that doesn’t happen, you may get into trouble with the authorities if customers complain about your restaurant. Either way, you lose time, money, and customers.

Hydro jetting your restaurant’s drains

It is a good practice to clean the restaurant’s drain on a schedule, even when there are no visible signs of problems with your drain system. But when cleaning your restaurant’s drains, you will be faced with the option of using drain cleaners, drain snakes, or hydro-jetting.

What is hydro jetting and why should you use hydro jetting in place of these other methods of drain cleaning? There are several reasons why drain snakes and liquid drain cleaners will not work when cleaning your restaurant drains.

Drain snakes are ineffective

Drain snakes are only useful for removing obstructions that are near the opening of the drain. If the problems lie deep inside the drain system, drain snakes are often useless for solving the problem. Moreover, drain snakes cannot remove drain clogs caused by sludge. The most the drain snake will do is poke a hole in the grease.

Liquid drain cleaners are dangerous

When dealing with minor problems in the home, liquid drain cleaners may work, but they are completely useless when you are trying to remove heavy grease buildup inside restaurant drains. Moreover, drain cleaning solutions will damage your drainpipes and the toxic fumes they emit can cause health problems for your staff and customers.

Hydro jetting, on the other hand, is ideal for dealing with the heavy grease buildup found in restaurant and commercial kitchen drains. This method will clean your drains without subjecting your pipes to the risk of damage. The way hydro jetting works makes it the best method for cleaning restaurant drains sustainably.

Benefits of hydro jetting your restaurant’s drain

Hydro jetting uses a stream of high-pressure water to blast debris away from inside your drains. To hydro-jet, the drain, a high-pressure hose with a special nozzle is fed into the pipes. One end is attached to a pressurizing machine that sends a jet of water – up to 8,000 PSI – to directly blast away grease, sludge, soap scum, and even tree roots from the pipes.

Hydro jetting can benefit your restaurant business in the following ways:

Saves you money

Hydro-jetting your drain prevents plumbing failure. Small problems that are easily solved by hydro jetting pipes can escalate until they result in sewer line blockages and plumbing failure. Hydro jetting makes it easier for your plumber to spot problems with a sewer video camera inspection and deal with them quickly.

Augments your waste management system

Even with the best waste management protocol in place, your drain systems will struggle to deal with certain types of waste. This can happen despite a grease trap installed in the system. Hydro jetting your drains improves the efficiency of your existing system by preventing malfunctions and complications.

Resolve neglected grease traps

If your grease trap has been neglected for a long time, removing the accumulated debris at the bottom of the grease trap will not solve the problem. This is because the drain lines connecting to the trap would also have become clogged with debris and will need hydro jetting to clear out the obstructions.

Easy preventative maintenance 

The sewer line that runs beneath the ground in your home is the vital connection between your home’s plumbing system and the city’s main sewer line in the street, says State Property Management LLC. This pipe transports all the wastewater from your home into the municipal wastewater management system.

Sewer pipes are tough enough to withstand pressure and the other forces underground pipes are subject to. They can work for many years without any signs of trouble. But this is not to say that the sewer line or pipe in your home cannot get broken because they can.

Several things can break your home’s sewer line. Five of the most common ones are:

Soil movements

The soil surrounding the underground pipe may shift. This most common form of soil movement is called settling. When the soil around the pipe settles, it creates a dip along the line. Over time, the buildup can occur in this downward slope, leading the pipe to eventually break.

Poor installation

If the pipe is not installed with the proper downward slope, the possibility of clogs and blockages becomes higher. Sewer pipes with an inaccurate downward slope will ultimately break. Substandard piping materials will also lead to the failure of the sewer line.

Damage by tree roots

If there are trees or shrubs in the vicinity of the line, their roots can endanger the sewer pipes. Tree roots may penetrate sewer pipes in a bid to access the nutrient-rich water inside them. If this happens, the pipe will not only break but will be blocked by plant roots.

Aging pipes

Pipes become more predisposed to damage with age. This is the accumulated result of years of wear and tear. Some kinds of pipe materials such as metal pipes are more prone to damage than others. Old sewer lines will leak and clog more often than newer ones.

Abusing the sewer line

Homeowners often assume the sewer line is capable of handling anything they throw at it. As a result, they dump grease, fats, oils, and other materials into the line. Anything other than human waste and toilet paper inside your sewer lines can result in the pipes breaking.

How can you tell if your sewer line is broken and what should you do to solve the problem?

Common signs of a damaged sewer line include:

The odor of sewer from the drain or around the yard.

Lush green areas in the yard, distinct from other parts of the yard.

Puddles of water or soft spots in the yard that are not caused by rain or irrigation.

If you notice these problems in your home, you may suspect a crack in your sewer line. What can you do if the sewer pipe is broken?

Having Your Sewer Line Repaired by a Professional Plumbing Company is Your Best Bet

How to handle a broken sewer pipe

A broken sewer pipe will not only interfere with your use of the home’s plumbing, but it can also endanger the health of your family. If left unattended, the damage will become more extensive and more costly to repair. Eventually, it can even compromise the city’s sewer lines.

Here are ways to handle a broken sewer line:

Locate the damaged pipe

Pinpointing the location of the damaged pipe makes it easier to assess the damage and determine the best way to solve the problem. If the pipe is in the crawlspace or basement, finding the damaged section is easier. Otherwise, you will need a professional plumber to conduct a sewer video camera inspection of the sewer line.

Evaluate the damage

The inspection will tell you the extent of the damage. If you are lucky, and a small section of the sewer line is damaged and the damaged portion is within easy reach. The evaluation will also identify the root cause of the pipe damage and recommend the best way to fix it.

Repair or replace the sewer line

Depending on the cause of the problem and how far it has gone, you have two courses of action open to you. On one hand, you may only have to repair the damaged section of the pipe. On the other hand, you may need to replace your entire sewer line.

Fix the pipe

To repair the damaged pipe, you have two options. The first method involves excavation: digging a trench in your yard to reach, retrieve, and replace the damaged pipe. This method is invasive, time-consuming, and expensive. You will also have to fix your damaged landscaping afterward.

The second option is a trenchless method that does not involve excavation. Instead of digging up your lawn, the section of the damaged pipe is repaired by relining it. This method is quick and effective. It is the recommended fix for your broken sewer line.

Replace the sewer line

One of the most beautiful things about living on this planet is the regularity with which seasons come and go. Every single year for as long as humans can remember, the rainy season comes. Following in the wake of those rains are a lot of good things and, sometimes, a few bad things.

The rains create the environment we need for our food to sprout and also feed the underground rivers where we get our water. But the same rain that turns nature into a lush paradise can ruin homes. The rainy season is synonymous with flooding, not only in fields but also in homes.

The rains will certainly come and go, but you want to be sure that after the rainy season is gone, your home will be as it was before the rains came. You wouldn’t want floodwater getting into your house and leaving you with mountains of bills to pay or even endangering your family’s life.

That blessing of rain from the skies can also become a curse of floodwater inside your home unless you take the right steps, warns Sun-Pro Realty & Management. Don’t forget that the stress and expenses of fixing water damage are nothing compared to the small steps you can take to prevent flooding in your home. 

That bears repeating; flood prevention is many times more inexpensive than the cost of restoring your home after it has been hit by a flood. How can you keep your home from being flooded this rainy season? Here are tips you can follow to keep your property safe when it rains.

8 tips to help you prevent flooding in your home

Improve drainage by grading the area around your home

Water naturally flows from high ground to low. If the ground near the foundation of your home is lower than the surrounding areas, you will have flooding in the basement. Take note of the direction that water flows when it is on your property and areas where floodwater accumulates around the home. 

Make sure the ground around the base of the house slopes down to the street. Add dirt and sod to make the ground higher, if necessary.

Inspect and clean downspouts and gutters

Downspouts collect rainwater from the gutters around your roof and discharge it into a part of the property where it won’t flow back into your home. But downspouts and gutters will only play their role if they are not clogged with debris or damaged. 

Make a habit of inspecting and cleaning your gutters and downspouts regularly, particularly if there are lots of trees around your home.

Test your sump pump on a schedule

The sump pump is supposed to automatically remove floodwater that finds its way into your basement. This system is designed to work without your direct involvement, but sump pumps can fail. 

You may not realize that your sump pump has stopped working until your home is unexpectedly flooded. You can avoid this by doing scheduled tests of the sump pump and installing a backup system.

Keep storm drains free of debris

Any debris you let scatter around your yard can find its way into the storm drain when it rains. Blocked drains on your property or the street will predispose your home to floods. 

All storm drains on your property are your responsibility to clean and maintain. You should also inform the city department responsible for cleaning the city’s drains if a storm drain on the street is posing problems. 

Clean clogged drains after heavy rains

Even if you keep your yard free of debris, your drains can still get clogged with debris transported from the areas surrounding your home. After heavy rains, you should check your drains to make sure they are not clogged with debris. This is a lot of trouble to go through but it is a lot less than what you will have to endure if your home gets flooded.

Install a backflow prevention device

A backflow prevention device ensures that if during heavy rains, your home’s sewer systems are overwhelmed, water does not back up into your home. If there is no backflow device installed in your drains, you can end up with a lot of unpleasant material inside your house. A backflow device will save you the distress and cost of dealing with this kind of situation.

Protect your home with sandbags

If the home is in an area with a high risk of floods, you can reduce your home’s exposure to floodwaters by placing sandbags in those areas where the risk is highest. Sandbags are an effective way to redirect the flow of water and keep it from going where you don’t want it to. When using sandbags, pay close attention to the slope of the ground to avoid trapping the water, instead of redirecting it.

Install flood detection systems

There are several reasons why you may want to turn off the water supply to your home. Maybe you are about to leave town and don’t want to leave the water on. Or you are testing the shut-off valve. Or, the most common reason, is that you have a plumbing emergency.

Whatever your reason for wanting to turn off your water, you have to actually know where the shut-off valve is and how to use it before you can stop the water supply to your house, says Stringer Management. This post shows you how to turn off your home’s water supply before doing plumbing repairs.

There are two ways to turn off the water supply to your home. You may shut off the supply to the entire home by turning it off at the mains. Or you can cut off the supply to specific appliances or your water heater. The right method depends on your reason for shutting the water supply.

How to turn off the water at the main shut-off valve

The first step is to locate the main shut-off valve for your home. Its location depends on the age of your home and the climate in your location. You may have to look around your property to find it. The three places where you will often find the shut-off valve are:

Inside the house

Areas inside the home where the shut-off valve is often located are the basement, garage, laundry room, or exterior wall facing the street. In many homes, it is near the water heater. A shut-off valve inside the basement will often be at eye level. If it is on the main floor of the home, expect it to be positioned lower.

Outside on an exterior wall

If the climate in your region is relatively warm, the shut-off valve could be located outside the house. You will often find it sticking from the lower part of an exterior wall. Start your search in the areas near the outdoor faucet.

Close to the street

In some areas, the shut-off valve will be located in the same place as your water meter. You may find a fixture near the street and below the ground, with two shut-off valves on opposite sides. The street-facing valve is for the city’s use. The other valve facing your home is what you are looking for. Do not touch the valve until you verify that it is indeed the main shut-off valve for your home.

Now that you have found the main shut-off valve for your property the next step is to actually turn it off. How you turn off the valve depends on the type of valve your home has. The most common types are:

Ball valves: These have a lever handle. When the valve is open the handle lines up with the pipe. To shut it off you turn the lever until it is at a 90-degree angle to the pipe.

Gate valves: These have a circular handle. To shut this off turn the circular handle in a clockwise direction until it stops moving.

Note that since your main shut-off valve is rarely used, it might be stiff, and you will need to exert effort to get the valve handle or lever to move. Also, some homes have branch valves near the main shut-off valve; these let you cut off the water supply to selected areas of the home.

After shutting the valve, drain any water inside your home’s supply pipes. To do this, open the lowest faucet in the house as well as the highest one. This step helps you avoid flooding when you eventually start your repairs. You may also use this step to verify that the water supply is indeed terminated.

How to turn off the water supply at the water heater

If your hot water pipe is leaking or you want to replace or repair your water heater, there is no need to shut off the water supply to the entire home. You can easily prevent cold water from getting into the water heater or hot water from leaving the water heater in the home.

Your water heater has two valves; a blue one to control cold water supply and a red one to control hot water. If your hot water pipe is leaking and you need to fix it, shut the red valve. On the other hand, if you are trying to repair or replace a water heater, close the blue valve.

How to turn off the water supply for appliances

If the problem is with a dishwasher, washing machine, or any water-utilizing appliance, you can turn off the water supply to that appliance alone. You may also shut down the water supply to a specific plumbing fixture in the home, dripping faucet, or running toilet.

Finding the right plumber when you have plumbing issues in your home is more than half the effort of solving the problem. A good plumber looks holistically at your plumbing systems, instead of simply focusing on the single issue you reported, as amateurs do. That plumber not only solves the plumbing problem but also helps you prevent future problems.

How do you find that kind of plumber?

Most homeowners wait until there is a pressing problem with their plumbing before they look for a plumber, says Envy Property Management. When you do this, chances are you won’t care much about the qualifications of the person you hire. You just want them to make the problem go away. This is one reason why plumbing problems in your home are never completely solved.

To find a qualified Chicago plumber, you should start the process long before there are issues with your home’s plumbing. This will help you avoid the anxieties that lead to hiring the wrong person. 

So, what criteria should you use when trying to find a plumber for your home? If you live in the Chicago area, the list below will answer that question for you.

Are they local or national?

A national chain may have all the right people but the two things they lack are flexibility and a personal touch. These are important when looking for a plumber. You want a local company that you can build a long-term relationship with. That plumber should come to know your home’s plumbing intimately so that they can diagnose and solve problems quickly and economically.

What kind of plumbing services do they provide?

When looking for a local plumber for your home, you do not want to hire a commercial plumber in Chicago. Commercial and residential plumbing systems are very different, and a commercial plumber may not give you the kind of service you need in your home. Only hire a commercial plumber if they also provide residential plumbing services.

Ask about licensing, qualifications, and memberships

Plumbers in Chicago are required to have up-to-date licenses to practice in the city. Check that the plumber is properly licensed by the city. You will also want to know if they are members of the local chapter of their professional organization. The training of the employees who will be doing the work matters, so make sure to ask about that.

How long have they been in business?

Experience counts: not everything is learned in training. The longer a plumber has been in business, the more time they have had to gain the needed expertise to solve the most difficult plumbing issues. The other reason to hire an experienced plumber is you can use them as your sounding board; they become a trusted adviser on all plumbing issues.

Are they bonded and insured?

What kind of insurance do they have? How much insurance do they carry? The plumber’s insurance policy should include worker compensation for any worker who is injured while on your property, liability insurance to protect you from lawsuits, and property insurance if your property is damaged by their workers.

What do others say about them?

The company should have an online footprint that you can follow. Check online review sources to see what people are saying about them. Look out for negative reviews and pay particular attention to how the company responds to those. Some online sources where you can look for reviews are BBB (Better Business Bureau) and Yelp.

Can they provide references?

Ask the plumber for a verifiable list of people who have used their services in the last year. These should be people who live in Chicago. Ask the plumber’s permission to contact these references. Make sure to call some of the people on the list to find out what their experience of working with the plumber was like.

Do they offer a warranty on their work?

What happens if there are issues with a job the company did for you? Will they fix the problems at no cost to you? Will there be a warranty on the parts they supply? If there are warranties, you will want to know the terms and conditions attached to them. Warranties should be gotten in writing.

How will they estimate the cost of the job?

Will they provide a free estimate? How do they arrive at that estimate? Will you get a quote over the phone, or should you expect them to do a home inspection? You want your plumber to have the right information about a problem before quoting on the job. Do not work with plumbers who attempt to give you a quote over the phone.

How do they charge?

A clogged sewer drain is one of the very worst plumbing problems to have in your home. Just imagine the spectacle of wastewater with human waste and all kinds of filth bubbling up from a drain and flooding your home. This problem is better imagined than experienced.

A clogged sewer drain will not only cause flooding in your home, but it will also expose everyone in the house to significant health risks, warns IPM Management. Preventing sewer drain clogs is the best way to deal with them. But to prevent a sewer drain clog, you must know the signs of problems with your sewer drains.

How sewer drains work

All homes that are connected to the city sewer service have a single underground sewer drainpipe that runs from the home to the city’s systems. This pipe collects wastewater from all the drainpipes inside the home and channels it to the city sewers.

This main pipe is usually 3 or 4”in diameter and hooked to the home’s main drain. Other drainpipes that run from the home’s main drain to its various plumbing fixtures (sinks, showers, or toilets) often have a smaller diameter of 1 ¼ to 2 ½”. 

If the main sewer drainpipe which connects the home to the city systems is blocked, wastewater from the home will not pass through. Instead of going to the underground city sewer lines in the street, it will build inside the pipes until it eventually backs up into your home.

Signs that your main sewer drain is clogged

Here are the signs you will see in your home when there is a clog in your main sewer line.

Plumbing fixtures are clogged at the same time

Depending on how you manage your home’s plumbing, you may experience clogged drains from time to time. But when this happens, it is either the toilet, sink, or shower drain is clogged.

You usually shouldn’t have multiple fixtures clogged at the same time. If you find that two or more of the drains in the main level of your home are clogged, you may want to inspect your main sewer lines.

Toilets that won’t flush

This is one of the clearest signals that your main sewer line is in trouble. Toilet drains can get clogged as a result of flushing non-flushable items down the toilet. If you hear a gurgling sound from a toilet whenever you use a sink, bathtub or washing machine, it’s a sign that your main drain may have problems.

Blocked tubs and showers

A clog in the main sewer drain will show up in the shower and tub before you see signs of it in the sinks. That’s because shower and tub drains sit at a lower level than sink drains. 

As a result, issues with the main drain will become evident in those lower drain openings first. If shower and tub drains are filling with wastewater or draining slowly, you could have a clog in your main drain.

Strange reactions when using a sink

Typically, you will not experience backflow of wastewater at the sink because sinks are at a higher level than toilets and showers. But you may have trapped air in the sink drain if your main sewer line is clogged. 

Another sign to look for is gurgling sounds from the toilet closest to the sink or a change in water level inside the toilet bowl whenever you run water in the sink.

Overflow/backup when using the washing machine

If your main sewer drain is clogged, one of the signs is when draining water out of your washing machine, the toilet to overflow or results in backflow inside a tub or shower drain. If this problem is also accompanied by toilets that do not flush properly, you can be sure that your main sewer line is blocked.

What to do if your main sewer drain is clogged

Follow these steps if you think the main sewer drain in your home is blocked:

This is not a problem you can solve by yourself. Get a drain specialist to inspect the main sewer lines; they have the tools to correctly diagnose and quickly solve the problem.

Do not run the water in your home or flush any toilet. As long as you do not send more wastewater into your sewer drains, the problem will not get worse. Wait for the specialist to arrive.

To make sure a faucet in the home is not accidentally opened, shut off the water supply to the entire home from the main shut-off valve (not the shut off valve for individual fixtures).