Flow Indicating Totalizer
Power Supply: Universal Supply (85 V AC to 265 V AC at 50 Hz.)
Operating Temperature: 0 to 50 Degree C
Model Name/Number: FIT100D
Accuracy: +-0.25% of F .S. for flow rate as well as totalisation.
Electronics Enclosure: Plastic Molded
Dimensions: 92mm(H) x 92mm(W) x 150mm(D)
Alarm Setting: 2 Nos. on flow rate with internally fixed hysteresis
Batching: 2 Batch Setting possible with 2 independent Relay for coarse and fine setting
Operation: Linear or Square Root,Programmable from front key pads
Keyboard : 4 Nos. of Keys for Parameter Programming
Storage Facility: Program and Data is stored in the EEPROM
Temperature Drift: +-0.015 % / DegreeC max of F.S on flow rate display
Humidity: 90% R.H max of F.S on the flow rate Display
Transmitter Supply: 24 V D.C 30 mA suitable to power one two-wire Transmitter
Communication Port: RS-232 with MODBUS RTU Protocol
The FIT -100 series is a compact sized Totaliser. Totaliser is designed to accept input from DP or Flow Transmitter. It has an option of L.C.D or L.E.D Display. Totaliser can accept input from transmitter operating in Linear or Square Root mode. Flow is integrated to 8 Digit Totaliser, from which 6-Digits can be easily viewed on Display window of Totaliser and remaining 2 digits can be viewed by simple press of an enter button. The 4-Digit Indicator is provided to indicate the instantaneous Flow rate in % or in any Engineering Unit.
Field Programmable Parameters.
Virtual 8 digit Display available to monitor Totalised Flow.
Isolated 4-20mA D.C. output proportional to Flow Rate.
Linear or Square Root operation.
Better Resolution with 4 Digit Display for instantaneous Flow Rate
Serial Interface with Computer through MODBUS RTU.
