Remote Air Filter Systems: Macbone Remotely Mounted Air Filters Explained
What a Remote Air Filter Actually Does
A remote air filter is simply an air filter housing you install away from the main unit (like a rooftop A/C or cab pressurizer) so it can breathe cleaner air. Instead of sucking dusty air from right next to a compressor or cab roof, you route intake ducting to a better location and let the remote filter do the first heavy lift.​
Macbone’s K10 is exactly that: a remotely mounted air filter module that feeds their rooftop or vertical cab units with prefiltered outside air, designed for harsh, dusty work environments.
Macbone Remotely Mounted Air Filters: Key Features
From Macbone’s product line, the K10 remotely mounted air filter is built for heavy-duty, dusty conditions and ties directly into their HVAC and cab pressurizer setups.
Mount type: remote (you place it where the air is cleaner, not on the unit itself).​
Diameter: 10-inch filter housing for solid airflow into cab HVAC.​
Compatible with:Â Macbone rooftop units and vertical cab units, so one filter module can feed multiple Macbone configurations.
Working environment: explicitly rated for dusty conditions, where normal intake filters plug quickly.​
Filter element: replaceable cartridge (Macbone specifies a matching element model) that catches dust before it hits the A/C evaporator or cab pressurizer.​
Macbone positions this remote filter as an accessory to their air conditioners and cab pressurizers, used as an auxiliary prefilter to improve overall system filtration and extend the life of internal filters.
​
Why Use a Remotely Mounted Air Filters System?
A remotely mounted air filters system solves a common problem: your cab A/C or pressurizer is often installed in the dirtiest possible spot (roof, rear wall, engine bay) where dust, diesel particulates, or silica are worst.
Putting a prefilter in a cleaner location and ducting air to the unit gives you:
Cleaner intake air:Â You avoid the worst dust zones around the machine or truck, so less particulate even reaches the filters.
Longer filter life: Prefilters stop bulk dust and debris, meaning internal cabin filters don’t plug as fast and maintain airflow longer.
Better cab air quality: Combined with a pressurizer, filtered intake reduces operators’ exposure to respirable dust and diesel particulates in mining, construction, and agriculture.
Lower maintenance and HVAC load:Â Cleaner coils and ducts lead to fewer service calls and more stable cooling performance over time.
On real jobs (mining, quarrying, demolition), properly designed cab filtration and positive-pressure systems can cut airborne dust in cabs enough that respirator requirements may be reduced, as long as systems are installed and maintained correctly.
Typical Use Cases for Remote Air Filter Systems in the USA
You’ll usually see a remote air filter system on:
Heavy equipment cabs (excavators, loaders, dozers) where cab filtration + pressurization is used to protect operators from silica and dust.
Off-road trucks and haul trucks running in mine pits or industrial sites with constant airborne contaminants.
Any Macbone-equipped cab using their rooftop or vertical A/C units and optional cab pressurizer, where the K10 remote filter acts as the first stage of filtration.
In these setups, the remote filter, cab pressurizer, and HVAC unit work together: the filter cleans the incoming air, the pressurizer keeps cab pressure slightly higher than outside, and the A/C handles cooling, heating, and dehumidification.
Basic Installation and Maintenance Considerations
Even though Macbone’s specific install steps are in their manuals, remote filter best practices are consistent across vendors:
Mount high and clean: Put the remote filter where airflow is good but dust is lower—often higher on the cab or away from wheel wells and exhaust plumes.
Use proper ducting:Â Smooth, sealed duct runs from the filter to the Macbone rooftop or vertical unit minimize leaks and maintain positive pressure.
Follow a filter schedule:Â In dusty environments, prefilters may need cleaning or replacement far more frequently than standard building filters, sometimes weekly in extreme mining or construction conditions.
Check cab seals and pressure:Â To get full benefit, cab doors, windows, and seals must be in good shape so the pressurizer and filter can maintain a real pressure differential.
Macbone’s own description notes that even without accessories, their units provide basic filtered air, pressurization, and dehumidification; adding a remote air filter is about upgrading to finer filtration and better performance in high-dust conditions.
