#bi-directional

Bi-Directional ESD Protection, Circuit Protection, CAN Bus ESD Protection Diode

Bi-Directional TVS Diode, Voltage suppression diode array, TVS Zener diode

Download Now the New GoldenGate 23.3 and also check the new 23c OGG Microservices interface. #oraclegoldengate #goldengate @oracle

GoldenGate 23c Free Oracle GoldenGate 23c Free is the same, powerful Oracle GoldenGate that businesses throughout the world rely on. It offers a full-featured experience and is packaged for ease of use and simple download—for free.  Whether you are a developer, a data scientist, a DBA, an educator, or just interested in real-time data, Oracle GoldenGate 23c Free is an ideal way to get started.…

What Is Bi-Directional (Bidi)? | Python GUI

Introduction

MGR-DHK Series DC Reversible Electrical Motor Rotation Controller is a DPDT DC to DC solid state relay. MGR-DHK Series uses DC control signal to control the direction of the DC Bi-directional Electrical Motor.

How to order

MGR-DHK (DC Bi-directional Electrical Motor Rotation Controller)  - [Rated Current]  - [Load Voltage] {-200 (200VDC)}

Parameters

MGR-DHK Series

Control Voltage:  10~32VDC (such as 12VDC, 13.8VDC, 15VDC, 18VDC, 24VDC, 27VDC, 28VDC, 30VDC or customized control voltage) Load Voltage:  200VDC Load Current:  10A, 15A, 20A, 25A, 30A, 40A Dimensions & Mounting:  105mm*75mm*33mm; Panel mount solid state relay with metal base and screw terminals

Features

● Low-impedance MOSFET as the output component minimize the total power consumption ● "Ultra-low" input current ● Low output off-state leakage current ● Low output on-state voltage drop ● Two color (Red & Green) LED output status ● Built-in forward/reverse interlock protection function

Dimensions and Circuit Wiring Diagram

MGR-DHK Series Electrical Motor Controller

Application

● DC Bi-Directional Electrical Motor

Precautions and FAQs

● If the load current is 10A, a heat sink must be equipped; if the load current is 40A or more, an air-cooled radiator or a water-cooled radiator must be installed. ● When the load is an inductive load, be sure to connect a varistor in parallel with the output terminal, whose voltage value is 1.6-1.9 times the load voltage. ● What are the differences between Panel mount SSR and PCB mount SSR? The panel type solid state relay (or device type, screw mounting type) needs to be fixed on a metal base plate or a heat sink, and is cooled by a heat sink or an air-cooled radiator. The PCB solid state relay (or pin mounting type) has the industry standard pin configurations, and can be mounted directly to the Printed Circuit Board, and the natural cooling as heat dissipation without the need for a heat sink. The PCB type has a smaller mounting size and a larger power density than the panel type. ● What is the DPDT solid state relay? DPDT circuit consists of two couples of SPDT circuit, and can control four different loads with one control signal, and only two loads can be switched on at the same time. Normally, DPDT solid state relay will be used to control the direction of the Electrical Bi-Directional Motor (Forward/Reverse, FWD/REV). If you want to know more about SPDT SSR, please visit What is the DPDT Solid State Relay?

All Regular Models We Offer

● MGR-DHK Series (DC Revisable Motor Rotation Controller, DPDT)Load voltage 200VDC

MGR-DHK10A200V

MGR-DHK15A200V

MGR-DHK20A200V

MGR-DHK25A200V

MGR-DHK30A200V

MGR-DHK40A200V

Introduction

MGR-1M Series Single Phase AC Reversible Electrical Motor Rotation Controller is a Panel Mount DPDT DC to AC solid state relay. MGR-1M Series uses DC control signal to control the direction of the Single Phase AC Bi-directional Electrical Motor.

How to order

MGR-1M (Single Phase AC Bi-directional Electrical Motor Rotation Controller)  - [Load Voltage] {-22 (220VAC); -38 (380VAC); -48 (480VAC)}  - [Rated Current]

Parameters

MGR-1M Series

Control Voltage:  3~32VDC (such as 3VDC, 5VDC, 9VDC, 12VDC, 18VDC, 24VDC, 32VDC or customized control voltage) Load Voltage:  220VAC; 380VAC; 480VAC Load Current:  10A, 20A, 25A, 40A, 50A Dimensions & Mounting:  57.4mm*44.8mm*28mm; Panel mount solid state relay with transparent cover, metal base and screw terminals

Features

● "Ultra-low" input current ● Low output off-state leakage current ● Low output on-state voltage drop ● Standard output RC snubber circuit ● Transparent cover for extra protection ● Built-in forward/reverse interlock protection function

Dimensions and Circuit Wiring Diagram

MGR-1M Series Electrical Motor Controller

Application

● Single Phase AC Bi-Directional Electrical Motor

Precautions and FAQs

● If the load current is 10A, a heat sink must be equipped; if the load current is 40A or more, an air-cooled radiator or a water-cooled radiator must be installed. ● When the load is an inductive load, be sure to connect a varistor in parallel with the output terminal, whose voltage value is 1.6-1.9 times the load voltage. ● What are the differences between Panel mount SSR and PCB mount SSR? The panel type solid state relay (or device type, screw mounting type) needs to be fixed on a metal base plate or a heat sink, and is cooled by a heat sink or an air-cooled radiator. The PCB solid state relay (or pin mounting type) has the industry standard pin configurations, and can be mounted directly to the Printed Circuit Board, and the natural cooling as heat dissipation without the need for a heat sink. The PCB type has a smaller mounting size and a larger power density than the panel type. ● What is the DPDT solid state relay? DPDT circuit consists of two couples of SPDT circuit, and can control four different loads with one control signal, and only two loads can be switched on at the same time. Normally, DPDT solid state relay will be used to control the direction of the Electrical Bi-Directional Motor (Forward/Reverse, FWD/REV). If you want to know more about SPDT SSR, please visit What is the DPDT Solid State Relay?

All Regular Models We Offer

● MGR-1M Series (Single Phase AC Revisable Motor Rotation Controller, DPDT)Load voltage 480VAC

MGR-1M4810

MGR-1M4820

MGR-1M4825

MGR-1M4840

MGR-1M4850