#battery closeup

iPhone would be the best mobile phone that we have ever seen, sometimes, some people will come to a sudden idea, what is inside such a good phone, maybe some people with good electronics knowledge, want to repair the iphone themselves, but being faced with a gadget like iPhone and you can not even find screws of it, how can you manage to do that, following this tutorial tells you how to disassemble the iphone.

Methods / steps

First,

1. Prepare for the tools required: an iphone, a suction cup, a screen cloth, a screwdriver, sim card pin. (Disassembling tools can not be green) 2. Remove the two screws of the lower of the iphone and use suction cups catch up them, and then slowly bring up, NOTE: Do not pull too vigorously in order to avoid even the cable being pulled off(the silver side and the back cover is sealed with plastic, do not warped).

3. Remove the suction cup, open the screen, open the cable, Note: No. 3 cable first switch to turn white on.

4. After Dismantling the first three rows of line we can make separation of the screen and the fuselage. 5. When Dismantling the screen, first write down all the screws (left 3, right 2, back 1, totally 6) 6. Then using your nails to make the screen metal frame slightly outward, and then pry and open a crack to the bottom of the LCD screen. 7. Turn the LCD screen to pry about 30 degrees, and then withdraw it. 8. Then we can put the touch screen and LCD separately. (If you only want to clear the screen gray, now turn back By the way) 9. Screen cable, home button. Second, the dismantling of the fuselage

1. First Give a close-up to the body of the iPhone 2. Firstly remove the 4th and 7th cable, then remove the screws (three left, four right, a camera bracket) and the camera bracket and next to remove the screws on the bottom right corner of a fragile posted (fragile stickers close-up). 3. Given below the camera bracket close-up: 4. Remove the motherboard: Slightly loosen the first camera to the fuselage, then turn up the motherboard from the bottom of the fuselage and then extract it(same as the dismantling of the screen). 5. Motherboard close-up, Camera close-up

6. Dismantling of the speakers: Removing the lower left corner of the rest of the sinking screws can be extracted with block, note: the right piece of metal is symmetrical with the right screw holes on the left gap. 7. Backshell cable's dismantling: backshell cable close-up (Note: shed all the screws of the rest, carefully tear out the cable, then 3th, 5th audio jack slide to the lower fuselage and then the cable comes out).

8. Vibrator close-up, power, mute switch close-up