#array junction box

Enertech is driven with the objective of enriching customers with clean, reliable and interrupt-free power with the use of both conventional and non-conventional sources of energy. The company began its operation in 1990 with the pursuit of offering and rendering solutions with relation to energy challenges. The company has got a highly skilled technical unit with which it has been able to build up a strong and solid manufacturing setup.

Surge Protection Devices are important when we talk about signal transmission lines. A signal is a referral depicting the information carried in the form of a waveform. It simply provides the enlarged information passed between transmitter and receiver. Signal transmission lines are the route carries audio, video, radar, image or no way any type of communication signal. The perfect approach prevails when the signal transmitted to the receiving point is completely received at the reception. There must be no loss of data or information. This approach is boldly challenged when surges try to enter into the system.

People are highly engaged in electrical and electronic equipments as it lead to the growth of any industry. Sometimes we experience problem in our equipments like computers, laptops, Television CCTV, PLCs etc. The main reason behind the equipment failure is surges. Citing the need of surge protection, JMV is one of the leading manufacturer of SPDs, based on application. A Surge protection device protects our electrical and electronic machinery from high voltage/current transient and surges. These devices either suppress or divert the path of the surges. Based on the incoming supply, the level of surge protection is designed for main LT to switching outlets.

According to IEC-62305-4, SPDs are classified into several classes. They are: Class B/Type I, Class C/Type II, Class B+C, Type I+II and other are application based SPDs. Class B/Type I SPD comes in service from LPZ (Lightning protection zone) 0-1 to protect against transient current discharge in 10/350 µs. They are designed to provide high level of protection where there is a risk of high surges. They are constructed for both single line phase and three line phase.

Class C SPD comes in service from LPZ 1-2 to safeguard across switching surges of 8/20 µs waveform. They are designed specially to protect AC power applications of sub- division. Class B+C SPD is a lightning cum switching surge protector. They are the most advanced version comes into zone from LPZ 0-2 with the combination of 10/350 µs and 8/20 µs waveform. They are devised to give protection for highly susceptive AC power applications from both lightning and switching surges. Application Based SPDs

Solar SPD is the perfect medium to save the entire solar plant from direct lightning onto PV panels.

Data line and telecom SPD is used to protect the important and confidential data from any sort of damage.

Security and Surveillance SPD is designed according to signal transmission system having high transmission frequency and weak anti- jamming ability.

Isolating spark gap is designed to protect the pipe insulation and insulating flanges from damage.

LED lightning SPD ensures an extra guarantee to the end user in terms of authenticity and durability.

Communication SPD is used to protect serial port which is highly susceptive and vulnerable to be damaged by transients.

Features and Benefits

Complying IS/IEC 62305-4, IEC 61643-11, IEC 61643-12, IEC 61643-21, IEC 61643-22.

SPDs prevents from short term over voltage caused by lightning or switching activity.

Easy to install and long product life offers best maintenance.

In any of the industry surges and transients are common which travels regularly. Some deices have the ability to tolerate these uncertainty within some limit and some don’t, it depends upon the device that it can withstand. For the sensitive industry such as solar and sensor based industry, these devices can easily be burn out/damage. For solar application based companies we have introduced an array junction box which provides protection from these surges and transients. Protection devices are enclosed within a polycarbonate box of enclosing type PS/PC. This box is providing IP 65 degree of protection that means it protects from low water jet from any direction and dust. For the protection from high voltage surge a sure protection device is installed within the box along with fuses. It is enabled with wire with lugs, DC switch disconnector, ferrules, and measuring/recorder devices. This box is designed for low power application in order of 500KW with rated voltage of 600-1000V DC. A neutral/earth point is provided with this box. This box is suitable for 1-24 string, these strings can have the current of maximum of 30A per string. Our Solar array junction box can handle30*24 A of current safely. Our box provides protection from over voltage and over current. It is installed in between the solar modules and inverter sections. This box is necessary because if transients comes and pass through the inverter or the PV modules, connected devices may get cascade damage/burnout.

For large solar power application we have developed Solar combiner box, this box is designed for above 500KW power. Depending upon the version chosen our solar array junction box facilitates supply safe. These protection devices not only facilitate to protect the inverter section and grid but also to the solar/PV modules. We are the company that deliver customized array junction box.

Global Array Junction Box Market 2017- Kangyu Electrical, Control Electric, GEESYS Technologies, Asterix Energy

Worldwide Array Junction Box Market 2017 Industry Research Report presents a professional and complete analysis of global Array Junction Box market on the current situation.

In the first part, the report provides a general overview of the Array Junction Box industry 2017 including definitions, classifications, Array Junction Box market analysis, a wide range of applications and Array Junction Box…