#aql sampling table

AQL stands for Acceptable Quality Limit, that simply means the maximum percentage of defective piece of material that can be acceptable while inspecting. In short, we can say in this inspection method minimum standard of quality permitted when material are inspected in consistent manner during whole production. In the Acceptable Quality Level Chart display the identification the minimum quality that is required to be acceptable for the customer delivery. Consumer can determine AQL so that they can easily identify the sample size that is require t inspect as per the quantity that you have ordered. There are 3 levels of quality that you can inspect (1) Minor Defect (2) Major Defect and (3) Critical Defect

High demands of manufactured goods are always the requirements of any goods and service providers. Unluckily with heavy manufacturing of material, the quality of goods decreased in result of that. There is a need of quality control agency that can conduct effective inspection of the material with least quality issue. However, it is not easy to inspect every goods and material because it is time taking and it has been observed that items get damaged while inspecting. That is the reason AQL Sampling was designed that check the product quality during sampling.

There is sheer need of an expert quality auditor who have experience about the accurate utilization of AQL inspection chart that is important while identifying production defects especially in apparel and garment manufacturing. The quality inspect allocate different responsibility to his inspection team to insure that the piece is error free and come with effective audit session. They know very well how to do the work so that the better quality of product can be shipped to the end customers. However, it is also a major factor that what is the size of the factory that determine how many staff is required for auditing of the material.

Off course it is the call of a particular business and production company decide to sampling size which is required to check, but for that you need to check the AQL chart for that  and as we have already described that there are 3 levels of defect inspection in the material inspection. You need to choose in which level your goods are ready to inspect.  We can consider the examples of 50,000 pieces of buttons for shirt (sample) in the production that will be tested to check whether they are fit and accurate to attach in the shirt or not. Then in this sample, it is possible that some of the samples are broken or not up to the mark, some are good enough to send for further production. After the percentage of total pieces will checked over the percentage of defected button pieces while inspection.