https://youtu.be/UqXNq2_Zv98Purpose: Clause 14.2 of the FIDIC Yellow Book 1999 addresses the provision of an advance payment by the Employer to the Contractor. The purpose of this clause is to facilitate mobilization and design activities, enabling the Contractor to initiate the project effectively. The advance payment is essentially an interest-free loan provided under specific conditions outlined in the clause.Implications:- Guarantee Requirement: The clause establishes a condition precedent for the Contractor to submit a guarantee, as specified in Sub-Clause 14.2, to trigger the entitlement to the advance payment. Without this guarantee, the provisions of the clause do not apply.- Interim Payment Certification: The Engineer plays a crucial role in the process by issuing an Interim Payment Certificate for the first installment after certain conditions are met, including the submission of the performance security and a guarantee equal to the advance payment.- Guarantee Validity: The Contractor is obligated to ensure the validity and enforceability of the guarantee until the advance payment is repaid. If the advance payment has not been repaid by a specified date, the Contractor must extend the validity of the guarantee.- Repayment Mechanism: The advance payment is repaid through percentage deductions in Payment Certificates, starting when the total certified interim payments exceed a certain threshold. Deductions continue at a specified amortization rate until the advance payment is fully repaid.- Default Consequences: If the advance payment is not repaid before the Taking-Over Certificate or termination under specific clauses, the entire outstanding balance becomes due and payable by the Contractor to the Employer.Primary Aspects:- Submission of Guarantee: The clause emphasizes the importance of the Contractor providing a guarantee to trigger the advance payment provision.- Engineer's Role: The Engineer is tasked with issuing the Interim Payment Certificate and plays a pivotal role in the process.- Guarantee Validity and Repayment: The Contractor's responsibility to maintain the guarantee's validity and the mechanism for repayment through percentage deductions are key aspects.Expert Opinion: From an expert perspective, the clause strikes a balance between empowering the Contractor with an interest-free mobilization fund and protecting the Employer's interests through the guarantee requirement. The detailed provisions ensure a structured and controlled process for the advance payment, minimizing the risks associated with non-repayment.Expert Analysis:The advance payment shall be repaid through percentage deductions in Payment Certificates. Unless other percentages are stated in the Appendix to Tender, deductions shall commence in the Payment Certificate in which the total of all certified interim payments (excluding the advance payment and deductions and repayments of retention) exceeds ten percent (10%) of the Accepted Contract Amount less Provisional Sums.The statement is about the repayment of an advance payment in a contract, typically seen in construction contracts. Here’s a breakdown:- Advance Payment: This is an upfront payment made before the work begins. It’s often used to cover initial costs.- Repayment through Percentage Deductions in Payment Certificates: The advance payment is repaid by deducting a certain percentage from the Payment Certificates. Payment Certificates are documents that certify the amount due to a contractor for work they’ve completed.- Deductions Commence: The deductions for the repayment of the advance payment start when the total of all certified interim payments (excluding the advance payment and deductions and repayments of retention) exceeds 10% of the Accepted Contract Amount less Provisional Sums.- Interim Payments: These are payments made during the project, usually after certain stages or milestones are completed.- Accepted Contract Amount: This is the total amount agreed upon in the contract for the project.- Provisional Sums: These are allowances for specific parts of the work whose details aren’t determined at the time of contract.So, unless stated otherwise in the Appendix to Tender, the repayment of the advance payment begins when the interim payments (excluding certain deductions) exceed 10% of the contract amount (minus any provisional sums). This ensures that the contractor doesn’t receive too much payment upfront, thus sharing the financial risk between the contractor and the client.The advance payment shall be repaid through percentage deductions in Payment Certificates. Unless other percentages are stated in the Appendix to Tender, deductions shall be made at the amortisation rate of one quarter (25%) of the amount of each Payment Certificate (excluding the advance payment and deductions and repayments of retention) in the currencies and proportions of the advance payment, until such time as the advance payment has been repaid.The statement is about the repayment of an advance payment in a contract, typically seen in construction contracts. Here’s a breakdown:- Advance Payment: This is an upfront payment made before the work begins. It’s often used to cover initial costs.- Repayment through Percentage Deductions in Payment Certificates: The advance payment is repaid by deducting a certain percentage from the Payment Certificates. Payment Certificates are documents that certify the amount due to a contractor for work they’ve completed.- Amortisation Rate of One Quarter (25%): Unless other percentages are stated in the Appendix to Tender, the deductions for the repayment of the advance payment are made at a rate of 25% of the amount of each Payment Certificate (excluding the advance payment and deductions and repayments of retention). This means that a quarter of each payment (after excluding certain amounts) is used to repay the advance payment.- In the Currencies and Proportions of the Advance Payment: The repayments are made in the same currencies and proportions as the advance payment. This means if the advance payment was made in different currencies or proportions, the repayment will follow the same pattern.- Until the Advance Payment has been Repaid: These deductions continue until the entire advance payment has been repaid.So, the statement means that the advance payment will be repaid by deducting 25% from each Payment Certificate (with some exclusions), in the same currencies and proportions as the advance payment, until the advance payment is fully repaid. This ensures that the contractor doesn’t receive too much payment upfront, thus sharing the financial risk between the contractor and the client.Interaction of Clause 14.2 Advance Payment with Other Clauses- Interplay with Sub-Clause 4.2 :- Effect: The interaction with Sub-Clause 4.2 is pivotal. Before the Engineer issues an Interim Payment Certificate for the advance payment, the Contractor must provide the Performance Security. This ensures a layered approach to risk mitigation for the Employer.- Coordination with Sub-Clause 14.3 :- Effect: Clause 14.2 and Sub-Clause 14.3 are intricately connected. The advance payment is contingent upon the Contractor's submission of a guarantee, a condition addressed under Sub-Clause 14.3. The timing and coordination of these submissions are critical to the smooth functioning of the payment process.- Alignment with Clause 15 :- Effect: The repayment deadline for the advance payment is tied to significant project milestones, including the issue of the Taking-Over Certificate or termination under Clause 15. This aligns the financial obligations with the project's progress, ensuring a fair balance of interests in case of project termination.- Relationship with Clause 16 :- Effect: Similar to Clause 15, the termination provisions under Clause 16 trigger immediate repayment of the outstanding advance payment. This ensures that in cases of termination by either party, financial obligations are promptly addressed.- Harmony with Clause 19 :- Effect: The clause acknowledges the impact of force majeure events on project timelines. In such cases, where Force Majeure under Clause 19 may delay project completion, the repayment schedule for the advance payment adjusts accordingly, preventing undue financial burden on the Contractor.- Integration with Sub-Clause 13.7 and Sub-Clause 13.8 :- Effect: Changes in legislation and cost adjustments, as outlined in Sub-Clauses 13.7 and 13.8, are considered in the Contractor's Statement for Interim Payment Certificates. This ensures that variations in project costs are appropriately reflected, maintaining transparency in the financial aspects of the contract.- Synergy with Sub-Clause 14.5 :- Effect: The Statement submitted under Sub-Clause 14.3 includes considerations for Plant and Materials. This harmonizes with the provisions of Sub-Clause 14.5, ensuring that the payment process takes into account materials specifically intended for the project.Key Considerations for Clause 14.2 Advance Payment:- Guarantee Submission:- Before the Employer provides an advance payment, the Contractor must submit a guarantee in accordance with Sub-Clause 14.2.- Without the guarantee, the provisions of the clause do not apply.- Performance Security Requirement:- The Engineer issues an Interim Payment Certificate for the advance payment after receiving the Performance Security in line with Sub-Clause 4.2.- The guarantee submitted by the Contractor must be in amounts and currencies equal to the advance payment.- Guarantee Validity:- The Contractor is responsible for ensuring the guarantee's validity and enforceability until the advance payment has been fully repaid.- If the guarantee has a specified expiry date and the advance payment is not repaid by a certain date, the Contractor must extend the guarantee's validity.- Repayment Mechanism:- The advance payment is repaid through percentage deductions in Payment Certificates.- Deductions commence when the total of all certified interim payments exceeds ten percent (10%) of the Accepted Contract Amount less Provisional Sums.- Amortization Rate:- Deductions are made at an amortization rate of one quarter (25%) of the amount of each Payment Certificate until the advance payment is fully repaid.- Default Consequences:- If the advance payment has not been repaid before the Taking-Over Certificate or termination under specific clauses (Clause 15, Clause 16, or Clause 19), the entire outstanding balance becomes due and payable by the Contractor to the Employer.- Coordination with Sub-Clause 14.3:- The advance payment is contingent upon the Contractor's submission of a guarantee, a condition addressed under Sub-Clause 14.3.- The Engineer issues an Interim Payment Certificate for the first installment after receiving a Statement under Sub-Clause 14.3.- Integration with Project Milestones:- Repayment deadlines for the advance payment are tied to significant project milestones such as the issue of the Taking-Over Certificate or termination under specific clauses (Clause 15, Clause 16, or Clause 19).- This aligns financial obligations with the project's progress and termination scenarios.- Consideration of Changes in Legislation and Cost:- The Contractor's Statement under Sub-Clause 14.3 includes considerations for changes in legislation and cost adjustments (Sub-Clause 13.7 and Sub-Clause 13.8).- Variations in project costs are appropriately reflected in the payment process.- Holistic Financial Management:- The interaction with other clauses ensures a comprehensive and coherent financial framework that considers project progress, termination scenarios, and external factors influencing project costs.Employing Clause 14.2 requires careful attention to these key considerations to ensure a transparent and fair process for both the Employer and the Contractor in the context of advance payments.Flowchart:Step 1: Start- The process begins with the initiation of the contract, marked by the "Start" symbol.Step 2: Guarantee Submission- The Contractor submits the required guarantee as specified in Sub-Clause 14.2.- If the guarantee is submitted, the process proceeds; otherwise, it ends.Step 3: Performance Security- The Contractor submits the Performance Security within 28 days from the commencement date.- The submitted guarantee is checked for equivalence with the advance payment.Step 4: Interim Payment Certificate- The Engineer issues an Interim Payment Certificate upon satisfactory receipt of the Performance Security.- This ensures that the necessary guarantees and securities are in place.Step 5: Guarantee Validity- The system checks if the guarantee is valid until the advance payment is fully repaid.- If yes, the process proceeds; if no, it moves to the steps for extending the guarantee's validity.Step 6: Repayment Mechanism- Percentage deductions in Payment Certificates commence when the total certified interim payments exceed 10%.- The amortization rate for repayment is initiated, and deductions are tracked based on the specified conditions.Step 7: Guarantee Amount Reduction- The guarantee amount is progressively reduced based on the amounts repaid by the Contractor, as indicated in the Payment Certificates.Step 8: Guarantee Expiry Check- The system checks if the guarantee has a specified expiry date.- If there's no expiry date, the process continues; if there is, it proceeds to the next step.Step 9: Guarantee Expiry Extension- If the guarantee has an expiry date and the advance payment has not been repaid 28 days prior to the expiry date, the Contractor extends the validity of the guarantee until the advance payment is repaid.Step 10: Default Consequences- The flowchart checks for triggers such as the Taking-Over Certificate, termination, or project completion.- Default consequences, such as immediate repayment of the outstanding balance, are implemented based on these triggers.Step 11: End- The process concludes with the "End" symbol, indicating the completion of the flowchart.Annotations and Additional Insights:- Timing Considerations: The flowchart emphasizes specific timing elements, such as the 28-day period for Performance Security submission and the 28-day period for guarantee expiry extension.- Progressive Reduction: The flowchart highlights the concept of the guarantee's amount being progressively reduced based on the amounts repaid by the Contractor. This ensures a dynamic and responsive approach to guarantee management.- Expiry Date Check: The flowchart includes a decision point to check if the guarantee has a specified expiry date. If so, the subsequent steps address the extension of the guarantee's validity.- Default Consequences: The flowchart indicates that default consequences, such as immediate repayment, are triggered by events like the Taking-Over Certificate or termination.Checklist for Proficient Execution and Deployment of Clause 14.2 Advance Payment:TaskDetails/Steps1. Guarantee Submission- Confirm Contractor's submission of a guarantee as per Sub-Clause 14.2.- Ensure the guarantee meets specified amounts and currencies.- Verify the guarantee's adherence to the form annexed to the Particular Conditions or an approved alternative.2. Performance Security- Confirm receipt of Performance Security in accordance with Sub-Clause 4.2.- Verify that the guarantee submitted is equal to the advance payment.3. Interim Payment Certificate- Engineer issues Interim Payment Certificate after receiving Statement under Sub-Clause 14.3.- Confirm the Employer has received the Performance Security and guarantee equivalent to the advance payment.4. Guarantee Validity- Ensure the Contractor maintains the guarantee's validity until the advance payment is fully repaid.- If the guarantee has an expiry date, monitor and ensure timely extension if the advance payment is not repaid.5. Repayment Mechanism- Track the percentage deductions in Payment Certificates for the advance payment.- Initiate deductions when the total of certified interim payments exceeds 10% of the Accepted Contract Amount less Provisional Sums.- Monitor deductions at the amortization rate of 25% until the advance payment is fully repaid.6. Default Consequences- Be aware of the triggers for immediate repayment (Taking-Over Certificate, termination under specific clauses).- If applicable, ensure the entire outstanding balance becomes due and payable by the Contractor to the Employer.Checklist for Applying and Overseeing Clause 14.2 Advance Payment:TaskDetails/Steps1. Guarantee Submission- Verify that the Contractor submits the required guarantee as specified in Sub-Clause 14.2.- Cross-check the guarantee against the stipulated amounts and currencies.- Confirm adherence to the specified form annexed to the Particular Conditions or an approved alternative.2. Performance Security- Confirm the submission of Performance Security as outlined in Sub-Clause 4.2.- Validate that the submitted guarantee is equal to the advance payment.3. Interim Payment Certificate- Oversee the issuance of Interim Payment Certificates by the Engineer.- Confirm the Engineer's receipt of the Performance Security and guarantee equivalent to the advance payment.4. Guarantee Validity- Monitor the Contractor's compliance with guarantee validity requirements until the advance payment is fully repaid.- If applicable, ensure timely extension of the guarantee if the advance payment is not repaid before the expiry date.5. Repayment Mechanism- Regularly check and track percentage deductions in Payment Certificates for the advance payment.- Initiate deductions when the total of certified interim payments exceeds 10% of the Accepted Contract Amount less Provisional Sums.- Supervise deductions at the amortization rate of 25% until the advance payment is fully repaid.Checklist for Guiding and Monitoring the Execution of Clause 14.2 Advance Payment:TaskDetails/Steps1. Guarantee Submission- Provide clear guidelines for the Contractor regarding the submission of the required guarantee.-
