Windows and doors Edmonton - Sunview
Sunview Windows and Doors in Edmonton offer an extensive line of vinyl replacement windows,entrance and patio doors to fit any home in Alberta and the rest of Canada. All of our windows are made of 100% Pure UPVC eco friendly vinyl that will never fade or change color over time. Canadian made and correspond to necessary standards. All windows are custom-sized to fit your home.
A big, beautiful view with maximum air flow gets it all with Sunview Windows and Doors casement Windows.
Casement windows are both beautiful and versatile, making them easy to use in any room and with any architectural style.
Bevelled exterior sash design gives the window the appearance of a larger glass area with an attractive slim line look.
State-of-the-art heavy-duty hinge system provides multi-directional ventilation and allows sash cleaning from inside the home.
Positive crank mechanism permits easy operation when opening and closing the sash.
Metal reinforcement helps to secure the operating hinge system. Multi-point locking system ensures a tight fit and added security.
Every home and office improves in performance with modern vinyl windows sold by Sunview Windows and Doors. We offer classical design that is typified by slightly rounded edges, therefore this system’s design is timeless and fits perfectly into a wide range of architectural styles - whether modern or traditional, new construction or remodelling, commercial or residential application. Furthermore, the technology built inside the profile is superior. The multi-chambered profiles use the insulating property of dead air-space to satisfy the highest requirements for thermal insulation and energy efficiency. This not only means a comfortable indoor climate regardless of the outside weather, but also helps to noticeably reduce your energy bill.
All about Tilt and Turn Windows
One of today’s greatest home innovations has, in reality, been around for nearly a hundred years. The tilt and turn window system has been in use in Europe since the early 1900s, however, modern materials and manufacturing practices now make this the best window in the world. What makes the tilt and turn design so special? It’s because this ingeniously designed product offers more versatility, security and durability.
Probably the best-known feature of our Tilt-N-Turn window is its dual action. The window tilts in at the top to provide cross-flow ventilation and then, with a simple turn of the handle, opens wide for easy cleaning.
Most people would never realize the clever functionality of this product just by looking at it. That’s because it really doesn’t look that different from any other window. But upon close inspection, you notice that the fit and finish is very nearly perfect. The surface is smooth and flawless. The glass looks thick and strong - because it is. Sunview tilt-n-turn windows and doors also offer another significant advantage over other windows or doors – they will not rust, will not rot and will not shrink or warp fade. They’re great for home or commercial applications. They’re durable and strong -- ideal for use in high-rise condos. That’s because in a high-rise, it takes a lot of time and expense to install windows in the first place. And building owners and condo associations don’t want to be replacing those windows after just 5 or 10 years. They want a product that will last a quarter of a century or more.
Another great advantage of our tilt-n-turn window system is that each enclosure is customized and built to your exact specifications. Our windows and doors are available in a wide variety of colors and textures to match your tastes, including flat profiles.
Sunview Windows - classical design.
1. Slightly rounded edges give the classical design.
2. High Thermal Insulation Values up to uw=1,0 W/m2K (U-Value 0.176 BTU/H*ft2*F, R-Value 8.9) are achievable (depending on glazing) and reduce heating costs noticeably.
3. High quality gaskets are standard in an attractive grey and comprise a system of dual compression-seals that keeps the cold, draft and moisture outside.
4. Galvanized Steel Reinforcing used according to tilt-n-turn fabrication requirements, supports the structural integrity and operational reliability.
5. Chamber Profile with a basic overall depth of 70 mm (2-3/4)
Save Energy and reduce Costs
Because of multi-chamber technology, tilt-n-turn profiles have an enormously low heat transmission value. This reduces your energy use and heating and cooling costs.
Feel Comfortable
The excellent insulation performance of profiles guarantees a noticeable difference in overall room temperature providing a sense of well-being throughout your living space. Furthermore reliable weather seals don’t give cold and draft a chance.
More Security
Depending on their position and accessibility, the windows have to satisfy unique security requirements. Based on your individual needs, window profiles can be fitted with specialized hardware, glazing and handles to improve resistance to forced entry.
Optimal Noise Insulation
Noise exposure affects the living comfort and can also impact your health. Even the basic version window produced protects against sound transmission. Tilt-n-turn profiles are fabricated to the highest possible level of Sound Transmission Control.
Many Colors
Colourful windows and doors are creative accents. Our profiles are available in over 40 colors including flat profiles and wood grain. We have a solution for every taste and any type of home.
Value now and in the Future
New windows are great investment that increases the value of your home. These high-quality, low maintenance and easy to clean windows with their stylish and uniform surface remain good looking for years to come.
Triple Glass is available with LoE, LoE2 + Argon gas.
More Tilt-N-Turn features:
TILT
Windows and doors can be tilted open at the top, allowing fresh air to enter through either side, or old air to exit though the top. This creates great air exchange and draft free ventilation throughout the room.
TURN
When used in the turn mode, the window opens fully inward (180 degrees). This offers ease of cleaning at any building height. By having the sash open fully, it also meets egress codes in case of fire.
SECURITY
Multipoint, end-retention locks provide the ultimate security. Most tilt-n-turn windows have at least six locking points compared with the one or two in traditional windows. It’s nearly impossible to force entry into this kind of windows without breaking the glass. And because the glass is thick, dual pane, that’s no easy task either. All locking plates, gears and screws are made from the same eco-friendly, anti-corrosion coated hardware and are salt-spray tested for 1000 hours.
INSULATING CHAMBERS
A thermal bridge is created when materials that are poor insulators come in contact, allowing heat to flow through the path. Sunview tilt-n-turn windows and doors have nine insulating chambers which prevent thermal bridging. The outer chambers are routed to continuously ventilate the windows and doors, to maintain higher insulation values. In addition, this helps lower your heating and cooling bills.
STEEL REINFORCED
Every window and door is reinforced with galvanized steel. Because of this the tilt-n-turn windows and doors which are offered by Sunview Windows and Doors are incredibly strong and have a very high structural rating.
MITERD CORNERS
All frames and sashes are mitre-cut and then fusion welded at 468 degrees F. The frames on our windows and doors will never split or gap, as is commonly seen in wooden windows. All corners are also shadow grooved to add an additional finished look to our product.
GLAZING METHOD
Insulated glass units sometimes fail because they sit in water or moisture. This moisture heats up during the day and then cools down at night. This convective motion can break the seal on insulated glass and cause it to fog up inside. You’ll never see that on our tilt-n-turn windows. That’s because Sunview Windows and Doors sells windows that utilize a five-degree interior pitch on their frames and sashes. This keeps water continually draining. All glass units are also raised up from frame so they never have to sit in moisture for any period of time.
INSULATED GLASS UNITS
Sunview Windows and Doors frames are a 70mm deep system that can accommodate Insulated Glass Units (IGUs) up to 1 ¼ “ thick. All IGUs have a minimum of ½” of air space between the inboard and outboard glass panes. Additionally, this glass is coated with Low-E, resulting in an extremely energy efficient window system that qualifies for federal tax credits.
GASKETS AND DRIAINAGE
Sunview tilt-n-turn windows and doors use twin-seal compressing gaskets and overlapping frames and sashes to make this the ultimate watertight system. These windows and doors have one continuous gasket throughout the frame which seals tightly in the corners. All frames, sashes and mullions are routed to provide a reset space for the relief gasket, which is used to create a pressurized rainwater drainage system.
What makes a project Sunview Project?
The Sunview difference is our meticulous care in each and every project we undertake.
With Sunview windows, there’s no such thing as a mass produced window manufacturing. Every single window we sell is customized to fit the specific needs of the buyer, down to the finest detail.
From a range of interior and exterior options, brick molding, grills, colors and design schemes we aim to create the vision of the buyer’s windows exactly as they envision it. We will create a custom order for any glass a customer needs, and fit it into the windows. And it doesn’t stop at aesthetics – comfort is just as important. That’s why the windows we sell offer the highest energy efficiency, insulation and maximum thermal protection to provide a complete, satisfying experience. All Sunview’s products not only meet, but exceed Energy Star compliance for energy efficient products.
We use 100% UPVC vinyl on all of our windows. So, we can create our beautiful work without leaving an impression on the beauty of nature. We provide a full, industry-leading warranty on every single one of our products. Our windows will not leave the factory until we are 100% satisfied with them. That is our promise, and that is what makes Sunview windows different.
The world of windows and doors can be complex. At Sunview Windows and Doors we are dedicated to clearly stating what products we offer, the standard features to each unit and the replacement options that are available to you. We seek to answer any questions our customers have, both regarding our products and the window and door industry in general.
• What are your windows constructed from?
• What kind of warranty do you offer?
• Do you offer installation of your products?
• What colors are available?
• I have an older home and I want to replace the windows and doors. Can Sunview Windows and Doors replicate the look of my current windows?
• What makes vinyl a better choice over wood or aluminum?
• What is argon gas and why is it used with Low E glass?
• What is an INEX spacer and why is it important?
• What is the U-factor?
• What is low emissivity glass?
• What is condensation?
What are your windows constructed from?
Sunview windows products are constructed from UPVC (pure vinyl), which is the best overall solution for your windows. However we also sell wood windows. Based on your specifications we can meet any of your specified criteria.
What kind of warranty do you offer?
We offer 15 years warranty on workmanship and a lifetime warranty on our windows and doors.
Do you offer installation of your products?
Sunview Windows and Doors have their own window professionals with years of experience to get the job done right, regardless of the project size.
What colors are available?
We have more than 40 colors to choose from, all custom colors are available as well. (Just supply us with a color chip, picked at home depot or any other paint shops).
I have an older home and I want to replace the windows and doors. Can Sunview Windows and Doors replicate the look of my current windows?
Absolutely. Sunview Windows and Doors can manufacture window and door units based on your specifications in order to meet your criteria.
What makes vinyl a better choice over wood or aluminum?
Your choice of framing material goes a long way toward determining the longevity and energy of the total window system. Wood windows possess excellent thermal qualities but are prone to weather deterioration and require staining or painting. Aluminum windows are very durable but offer little insulating value because they conduct energy rapidly. Vinyl windows are your best choice because they offer thermal characteristics similar to wood, are extremely durable and provide a finish that is virtually maintenance – free. Vinyl frames have welded corners, which make it air tight and prevent elements such as water and dust from leaking into your home. Moreover, vinyl offers the best protection against air and noise infiltration, which means a more comfortable and peaceful living environment. Vinyl material maintains its new look over time, eliminating fading and repainting.
What is argon gas and why is it used with Low E glass?
Argon is a safe colorless, odorless, non-toxic, non-flammable insert gas. It is used to reduce heat loss in sealed units by slowing down convection in the air space. Commonly it is used in place of air between the glass panes of an insulated Low E glass unit. Argon's heat conductivity is lower than that of air. And thus it is better insulator and contributes to a lower U-factor. Argon is not an effective solar performer by itself and so; it is used in conjunction with Low E insulated glass. Argon gas is a relatively inexpensive option, and can easily recover its cost in heat savings.
What is an INEX spacer and why is it important?
The INEX warm edge spacer is the best performing solution on the market. INEX spacer has a conductivity rate 25 times lower than aluminum spacers. INEX helps to reduce your condensation problems, and also reduces the risk of thermal breakage.
The U-factor or U-value is the measure of a window's thermal efficiency, based on its resistance to the flow of energy. The lower the U-factor- the higher thermally efficient is the window. Most new window technology had been aimed at lowering U-factors through the use of three important innovations: INEX spacer, low emissivity glass coatings and argon gas.
What is low emissivity glass?
Low emissivity glass, commonly referred to, as Low E. is glass that has been coated with a micro-thin metallic film to improve thermal performance. The coating reduces the transfer of heat rays through the glass while still allowing light to pass through. In essence, the coating reflects heat back toward its source. Thus, heat from the furnace stays inside the home during cold weather, resulting in greater comfort and lower energy costs. Low E coatings also reduce harmful ultraviolet rays that cause drapes and upholstery to fade.
Condensation is the fog that is evident on the glass of your windows. This is the same fog that appears on the outside of a cold glass during the summer. Condensation is actually the result of high humidity levels in your home. It generally appears as moisture or ice on the interior lite of glass on your windows. The problem is more prevalent on the glass of your windows because the surface condenses more visibly. This means that the glass has the lowest temperature of any visible surface in your home. It needs to be noted that if moisture is visible here, it could be happening elsewhere as well.
Problems such as peeling paint, rotting wood, mildew or moisture spots are typical symptoms of condensation.
We have compiled some possible solutions for your condensation problems. Please use your judgment as to which solutions may apply to your home. Remember, the windows are not the cause of condensation, they are simply an indicator of a larger problem.
What causes condensation?
The cause of the condensation is extreme moisture in the air. When warm air meets a cooler surface, it condenses. This creates the visible moisture you see on the surface of your windows. Condensation also occurs when the flow of warm air is restricted from reaching window surfaces.
As stated before, moisture may come from a variety of sources. We have compiled various activities and how much moisture a family of four contributes to their living environment.
• Normal Breathing ---1/2 pints per hour
• Cooking (3 meals a day) --- 4 to 5 pints per day
• Showering --- 1/2 pint each
• Plants --- 1 pint per day/per plant
Average daily living activities can contribute more than 18 gallons of water per week for an average family of four. As you can see, normal activities that you take for granted can greatly contribute to the humidity levels in your home.
Humidity
Humidity is the amount of moisture in the air. It may come from various sources. Your home needs a certain amount of moisture, but deciding how much you need is a critical decision.
The following chart will help you with the moisture level of your home; reducing humidity while maintaining comfort. The chart is based on the inside relative humidity for a 70° indoor temperature.
Too Much Humidity
If there is moisture on your windows, it is important to check your entire home. Problem areas could reveal themselves as damp spots on ceilings and walls. The end result could be the moisture passing through the walls, insulation, and to the exterior walls causing peeling or blistering paint. This could eventually cause rotting of the frame of the house if left untreated.
Location & Time
Some regions are more prevalent to condensation than others. Generally areas that reach 35° Fahrenheit or below in the winter months are more susceptible to condensation.
Interior condensation is more likely in the winter months. This happens when moisture in the air contacts a surface whose temperature is lower than the dew point (the temperature in which air manufactures dew).
Exterior surface condensation usually occurs on sultry, humid summer days. An example would be that moisture forms on the outside of a window in the summer when an air conditioner is being used in the home. This creates a surface temperature of the glass below the dew point.
New Home vs. Old Home
You tend to see less condensation in older homes. People were not so concerned about humidity levels or energy efficiency of home years ago.
Newer homes are manufactured more air tight. This leaves the moisture trapped or locked in the home. This means that newer homes leave no outlet for the humidity to escape unless steps have been taken to vent the moisture during construction.
Measuring Humidity
Although there are scientific measures to determine the humidity levels in your home, most homeowners do not have access to such means. An easier way for the average person to monitor humidity is to watch for the obvious signs in your residence. When you see the start of condensation on your windows, this is a sure sign that your humidity is reaching a level that could be too high.
Remember that watching the humidity level on the news has no bearing on the levels in your home. This is a humidity reading for the humidity in the air outside.
Reducing Humidity
There are some steps that you, as a homeowner, can take to reduce your indoor humidity level. One way is to make sure that all appliances requiring a vent are vented properly. This includes items such as clothes' dryers, gas heaters and exhaust fans. Exhaust fans are an excellent way to increase the air flow and reduce humidity if installed correctly. Areas that would profit most would be bathrooms and kitchens.
Another option is to make sure that your home is properly vented. There are a couple of ways to achieve this desired effect. One solution for more severe cases would be to open a window in each room for a short period of time. However, this is a very temporary solution.
A more permanent solution would be to make sure that all areas such as attics and crawl spaces have been vented. Many people cover attic vents or louvers for the winter thinking that they are keeping cold air out- not realizing that they are also keeping in moisture. For more specifics on these and other ideas, we recommend a heating and ventilation contractor or other specialists.
Types of Windows
Some types of windows are more likely to condensate such as bow or bay type window units. These windows are more exposed to the environment, and therefore, may be somewhat cooler in temperature. Another consideration is the lack of air movement within a bow or bay unit. Due to the shape of the unit, the air flow is somewhat restricted. One solution to this problem is to make sure that the unit is properly insulated upon installation. Contact your contractor or insulation specialist for further details.
The other solution is promoting air circulation by the use of a fan. This will keep the air circulating in the unit and the room moving.
Coverings
Another concern might be the type of window coverings that are being used. Remember that just as the windows are not the cause of condensation, neither are the curtains nor the blinds. They are merely another contributing factor to a condensation problem. Again, restricting the air flow to your windows can contribute to a possible condensation problem. The condensation is more likely to occur when window coverings are too tight to the windows- constricting the flow of warmer air.
Temporary condensation problem
Your condensation problem may be only a temporary situation. Below, we have outlined three examples of this.
The first is when a new home is built. A great deal of moisture is released from the building materials such as wood or plaster. During the winter months, the moisture will be discharged in to your home. This circumstance usually occurs only during the initial heating season.
The second is during the initial heating months of the winter. This is simply humidity stored in your home. This symptom should gradually dissipate during the season.
The third is a severe, rapid change in the temperature over a short period of time during the winter.
Windows
Just as the windows do not create the condensation, there is little you can do to the windows to stop the problem. Like stated above, it could be a sign of a much larger problem. Remember- the glass in your windows is just an indicator.
However, adding a good storm sash that provides an escape for moisture or changing the glass to a double paned unit will increase the temperature of the inside lite of glass, therefore decreasing the chance of condensation. Do not forget that other parts of the home may also have the same problem, just not as visible or obvious.
New Construction
When planning your new home, here are some helpful suggestions that should be considered;
• Choose vinyl window instead of a metal unit windows. Metal is a much poorer insulator than a wood product.
• Make sure that all attics or concealed spaces are properly ventilated.
• Make sure that all appliances (such as dryers or exhaust fans) are properly ducted, sealed and vented to the exterior of the home. Gas appliances should be a major concern. Water vapour is one of the by-products of gas combustion.
• Make sure that your contractor has considered the most appropriate way to keep soil moisture from permeating the basement or foundation.
• Proper insulation is one of the most valuable tools in any energy efficient residence. But many people often forget their water pipes and cold air ducts. Any pipes (such as cold water pipes) or ducts that condensates in the warmer months of the year should be covered. This should be done with an insulation that has an exterior vapour barrier.
We hope that this has been helpful in your quest for the answers to your condensation questions.
If you have tried the suggestions listed above such as proper ventilation and reduction of humidity levels in your home and have been unsuccessful, contact a professional heating contractor about other humidity reducing ideas.
This is a general overview of the condensation problem and may not apply to every person or situation. The main thing to remember is that condensation is high humidity levels in your home- not bad windows.
Glass options in Edmonton
Sunview Windows and Doors proudy presenting unique array of energy efficient glass to accompany our window designs.
Each glass has specific features that cater to different purposes.
See what is best for your project.
Clear glass units provide optimum noise protection compared to single pane glass. In terms of temperature resistance, it easily allows hot and cold air from both the inside and outside to flow through it smoothly.
Low E-Glass + Argon
Low Emissivity Glass, or Low E-Glass, is a strategic choice for lowering your home energy costs all-year-round. In winter, Low-E Glass reduces heat loss to the cold outdoors by reducing radiant heat transfer and reflecting interior heat back into your room, where it needs to be. It efficiently dispenses the sun’s rays; allowing more of them to enter the home as useable solar energy and providing extra warmth. In summer, the same effect occurs but on the opposite spectrum, helping reduce the flow of hot air into the cooler interior. Low-E Glass also reduces the effects of the sun’s ultraviolet (UV) rays, which are a leading cause of premature fading and degradation of fabrics and carpeting.
Triple Glass Low E2 + 2Argon
Triple pane glass windows are the most energy efficient models on the market. The extra pane of glass works all-yearlong to keep cold air outside and warm air inside. Special coatings are often applied to the glass to eliminate solar gain and enhance their energy efficiency. The extra pane of glass truly provides a new level of insulation, airflow and energy efficiency. If you want a different type of glass (stained glass, thicker glass, frosted glass, etc...), let us know! All of these glass options are manufactured with “INEX Spacer” insulating glass spacer to provide unparalleled comfort and technical integrity.
Making the right choices in energy-saving has never been more important. Global warming is a critical issue that has made energy awareness front page news. In the home or at the office, energy costs can be reduced by 10% to 25% by installing quality Insulating Glass (IG) windows with INEX spacer. With all these difficult decisions to make, choosing the right spacer bar for your IG unit has never been easier. INEX is the highest performing warm edge spacer in the market (better than super spacer). Manufactured with thermoplastic resin, windows with INEX Spacer offer the finest solution in thermal barrier technology on the market.
Bullet Proof Glass option is available as well.
Contact Sunview Windows and Doors for more information.
