Payless Cartridge Solutions Inc.

Printers are cheaper than its cartridges. To keep the cost to low, many people prefer using ink cartridges refill instead of brand new cartridges. If you use HP printer, you may know how costly the original HP cartridges are. For many, using original one is unfeasible for the amount and cost may not match to the volume of everyday need. There are many different types of ink cartridges available in the market. You can send them out to ink refilling service provider in Vancouver or you can do on your own.

Just because common ink refilled cartridges cost half of the branded one, doesn’t mean they are not high in standard. Many people think they are cheaper so they are not up to the mark. But in reality they last as long as that of manufacturer’s ink and deliver the same quality.

Use black pigmented ink. But before you choose it, make sure which type of ink your cartridges use- if it is just a black dye or pigmented based ink. Usually, most people use pigmented ink over black dyed colour. Find out the specification of ink of your cartridge.

Take syringes with needle for different colour.

Make sure to keep good collection of paper tissues

Use Isopropyl alcohol which is widely available in chemical stores. This is way cheaper than that of Head Cleaning solution which has similar compound.

Let’s check-out the maintenance process:

When the ink stats fading away, make solution using Isopropyl alcohol and warm water. Dip the print head of the cartridge into the solution and let it absorb for around 5 minutes. Remember, you put only the print head into the solution. Once it’s soaked, gently press the head on a tissue paper. And check the flow of ink pigment.

Now comes refilling the cartridges. You need to be extra careful while peeling off the label. Then drill out small hole until it appears to be plugged in. Then use syringe and take out the ink from the bottle and insert it in the indicated holes. Slowly use the plunger to fill out the cartridge but make sure there is no air bubble.

Cartridge refilling is not a tricky job. If you follow the process rightly, it can be a calk walk. However, opting to a professional ink refilling service provider in Vancouver can make this process even easier and safe in terms of proper functionality.

It’s said that ‘A stitch in time can save you nine’. It is very true but can be difficult to implement when you run a business; because you have so many deadlines to meet at one go and it’s hard to keep up with every small detail. So when it comes to running with your work flow, few obstacles can come in your way. Your printer may stop working when you are about to close your assignments. This post can save you some time by helping you with few preventative printer repair tips popular in Vancouver.

5 Preventative Popular Printer Repair Tips

Printers come with manufacturer’s manual where you will get every detail of keeping it clean at home. Every manufacturer provide different maintenance regime for every model. Do check on them at first, before you commence anything on your own. They will mention periodic maintenance chart. However, if you don’t have the manual or have lost it, you can follow the blow tips.

Many people use ammonia based cleaning solution to clean printers but it’s not a good idea. The best way to clean the outer part of your printer is to dampen the cloth with isopropyl or ethyl alcohol. When you clean the exterior, don’t forget to check out the rollers that take papers to its pathway. Clean it if it’s also dirty.

Keep using the ink routine wise. In most cases when there is a long gap, the ink seems to get dried out. Keep it pigmented. It won’t be a problem if it’s used for office purpose. Otherwise, if you have personal printer, make sure you take print of pages in every alternative week. This will prevent the ink from getting clogged.

Balance in humidity level. For best performance, keep the humidity level between 40-60%.

Rollers that put the papers to its pathway need to be cleaned. Toner, film and regular dust can accumulate to the system. This can slow down the printing process. Clean the path and the rollers in every month to keep it going smoothly.

The print heads need to be cleaned also. You can use isopropyl alcohol on the print heads. Clogged print heads can cause poor printing quality.

Printer is a delicate and important office work essential. Just like other electronic goods, it also needs periodical maintenance. However, if you need professional assistance, you can also call out for printer repair service Vancouver.

At times your HP laser printer may not perform the way it used to be. It’s quite daunting when you’re in the middle of an important assignment. If you’re facing some issues lately, you can check out this blog to get rid of this situation easily.

Professionals in printer repair in Vancouver have recommended some very common issues you may be experiencing-

Resolving 7 Common Issues of HP Laser Jet Printer-

If the page turns fuzzy as the toner smears or the toner does not stick to page, chances that the fuser is defective and it needs to be replaced with the new one. Then comes to the faulty cartridge. Change it and see if the ink still smudges. Clean the printer for the toner may spill out into the printer.

Paper jam is one of the common issues. And it can cause for many good reasons. You may be using a wrong paper type, the printer is dirty or the rollers that take the paper down to its pathway have worn out. First, use clean and the right kind of paper. Consider periodical cleaning of your printer and change the rollers. Roller changing could be a difficult job. Hence, relying on a professional printer repair service in Vancouver is the best bet.

When your printer shows 50.4 errors this means there is an issue in the power supply. If your printer is connected to UPS or power strip, make sure you unplug it before you commence running the system.

Trouble printing on envelopes causes when you choose 20lb paper in weight and thickness. The adhesive on the envelope should withstand the heat that the fuser produce while printing on the page. If you don’t put it correctly it may come out of the system sealed.

If the printing doesn’t take the right paper tray then you need to look at two things. One is the printing configuration on your PC then to the printer itself. Correct the tray selection from Printer Properties. On printer, check if the papers are correctly aligned in the control panel what is basically required in the paper tray.

Ghosting is a condition when the content or image prints properly but a lighter copy of it also prints somewhere on the paper. This happens due to fault in power outlet. First unplug your system and use the power outlet by plugging in other printers. Now, check if same things happen. Ghosting is also a result of worn out printer consumable parts.

Sometimes printers can collect all the papers from manual feed instead of one sheet. It happens when the pad that separates the paper is on the edge of its life. Replace it with the new one or better you look for a professional printer repair service in Vancouver.

So, now as you know the common issues of HP laser jet printer, you can identify any prospective issues easily. HP is no doubt a leading brand. But just like any other IT gadgets, it is also susceptible to damages if not maintained properly. But, regardless of the issues incurred, you can always expect to get it fixed if you bring it to the professional technicians on time.

Do you own a Canon printer? Here are a few problems that you may face when using Canon printing device. Don’t panic, the problems are easily solvable. Read through this blog to know the problems and the methods to fix them.

Canon Printer Repair Problem 1: Software Problems

Printer is one of the most essential pieces of equipment that is required for any documentation purpose. Majority of the departments in an office is largely dependent on printers to print important documents, contracts and many more. So printer is being used a lot and eventually you will come across a point where you will need to replace it with a newer one. For that you need the best one that suits your budget and fits your office environment.

Nowadays, consumers have so many options to choose the ink cartridges for their printers that they do not need to settle for a renowned brand to meet their needs. The cheaper ones offer such great choice that people can easily opt for that option instead of going for a renowned brand.

Off course, buying compatible and remanufactured inks has its advantages. Some of it includes, cheaper prices, as a result a large number of the cartridges can be bought and stored as back-up, helping you save unnecessary trips to get your cartridges refilled.

However, just like all these advantages, they have their disadvantages too. In this blog we will discuss the drawbacks of purchasing non-genuine ink cartridges over the genuine ones.

Due to the premium quality of prints, the ink tends to run out very quickly. You take dozens of pictures, download them and start printing, the next thing you know the cartridge is already out of ink before the task is even finished.