China explosion-proof equipment manufacturers

Large venues and industrial plants

Remote jet air conditioning units have good applicability in large venues and industrial plants. These places usually need to cover a large space, and long-range jet air conditioning units can be long-range cooled or heated by inhaling the air into the unit, and then injecting the air into the target area through the nozzle. This air supply mode can evenly distribute the air, thus effectively adjusting the indoor temperature and humidity.

Airport and railway station

These places usually require a comfortable waiting or waiting environment for a large number of people. The long-range jet air conditioning unit can spray air into the crowded area through the nozzle without occupying too much space, effectively adjust the indoor temperature and humidity, and providing a more comfortable waiting or waiting environment.

Public buildings and sports venues

These sites often require comfortable indoor environments for large numbers of people. The long-range jet air conditioning unit can spray the air into the crowded area through the nozzle without occupying too much space, effectively adjusting the indoor temperature and humidity, and providing a more comfortable indoor environment.

In conclusion, long-range jet air conditioning units have a wide range of applications for large venues, industrial plants, airports, railway stations, storage and logistics centers, public buildings, and sports venues. Through its unique jet air supply mode, it can effectively adjust the indoor temperature and humidity, providing a more comfortable environment. At the same time, the long-distance jet air conditioning unit also has the advantages of energy saving, environmental protection and high efficiency, so it has high practicability and promotion value in the modern building and industrial environment.

Characteristics of the heat recovery air treatment unit:

Energy saving: heat recovery The air treatment unit adopts heat recovery technology, which can recycle part of the heat in the exhaust gas and reduce energy consumption. At the same time, the unit can also automatically adjust the operating state according to the indoor and outdoor temperature and humidity and other parameters, to further save energy.

Environmental protection: heat recovery air treatment unit can filter the dust, pollen, bacteria and other pollutants in the air, reduce the pollution to the environment. In addition, the unit can also use environmental protection refrigerant and low-energy motors and other environmental protection technologies to further reduce carbon emissions. Heat recovery air treatment unit adopts heat recovery technology and air treatment technology can effectively adjust the indoor temperature and humidity, improve the air quality, and make the indoor environment more comfortable.

Convenient maintenance: the heat recovery air treatment unit adopts a modular design to facilitate maintenance and replacement. At the same time, the unit also has the intelligent fault diagnosis function, which can automatically detect and diagnose faults, and it is convenient for users to carry out maintenance and maintenance.

Strong adaptability: the heat recovery air treatment unit can adapt to different use environment and places, such as shopping malls, hotels, hospitals and other large public places. At the same time, the unit can also be customized and configured according to different places and needs, to meet the different needs of users.

Specification for heat recovery air treatment unit:

1.fillter section

Primary filter-folding plate or bag; mid-effect filter-bag; sub-filter-bag dense fold.

2.Thermal recovery section

Rotor heat exchanger: energy recovery function, super long service life, hig h runner surface flatness, good sealing, runner motor self-tension device, filter blockage alarm function (optional), prevent frosting device (optional), self-cleaning function, double cleaning fan.

Plate heat recovery: using the temperature difference between the two air flows on both sides of the partition plate to show heat and latent heat recovery.

Heat recovery: a heat tube is a kind of heat transfer component with high thermal conductivity, which transfers heat through the evaporation and condensation of the working medium in the fully enclosed vacuum tube shell.

3.Cold / hot coil

design feature

1. operational principle

The vertical jet air conditioning unit adopts the jet principle to form a strong air flow through high-speed jet air injection, so as to realize the rapid mixing and uniform distribution of indoor air. The fan inside the unit produces a strong air flow, and through the special nozzle structure, the air is ejected at a high speed, forming a jet effect. This jet effect can effectively mix the hot and cold air quickly to achieve the purpose of uniform indoor temperature distribution.

2. design feature

Vertical design: vertical jet air conditioning unit adopts vertical structure, covers a small area, easy to install and maintenance. At the same time, the vertical design can also effectively reduce the resistance of air flow and improve the efficiency of air circulation.

High efficiency fan: the unit is equipped with high efficiency fan, with the characteristics of high air volume and low noise. The fan adopts advanced power design and high-quality materials to ensure long-term stable operation and provide a continuous and stable comfortable environment for the room.

Nozzle structure: the vertical jet air conditioning unit adopts a unique nozzle structure, which can produce a strong jet effect. The nozzle design is optimized to adjust the injection Angle and intensity according to different application scenarios to achieve the best air mixing effect.

Control system: the unit is equipped with intelligent control system, which can monitor indoor temperature and humidity in real time, automatically adjust air volume and temperature, and maintain the comfort of indoor environment. At the same time, the control system also has the function of fault diagnosis and remote control, which is convenient for users to manage and maintain.

3. Advantage and application scenarios

Advantages: Vertical jet air conditioning unit has many advantages, such as high efficiency and energy saving, high comfort, stable operation, convenient installation and maintenance. Compared with the traditional central air conditioning system, the vertical jet air conditioning unit can better meet the needs of modern buildings for the indoor environment, and provide a more comfortable and healthy indoor environment.

How to determine the air temperature and humidity of the rotor dehumidification unit? Answer: If there is no heat source in the room and no other wet source except the staff, take the intermediate value of the room as the final design goal, that is, the temperature is 22℃ and the humidity is 25% design. Considering the temperature rise of the blower 5℃, it is appropriate to check the relevant manual and that the air temperature is 17℃. After deducting the hourly moisture amount of human body, the moisture content of air supply should not be more than 3.8g / kg dry air.

As is known to all, dehumidification wheel as the core component of the wheel dehumidifier, the performance of the wheel and the type of adsorption material directly determines the dehumidification ability, especially used in lithium battery industry glove box or injection workshop double wheel low dew point wheel dehumidifier, often need to put the air dew point temperature down to-45℃ ~ 60℃, so the use of wheel all imported wheel Proflute. The cold source of the low dew point runner dehumidifier usually adopts the frozen water system. The fresh air pretreatment + the front cooling section is cooled and dehumidification, and then the low temperature saturated air is treated by the deep dehumidification of the runner adsorption. The heating method of regenerative air is generally 0.3MPa steam heating. In order to achieve ultra-low dew point, a lot of steam is often needed, and the consumption is amazing. The use of low-temperature regenerative hot water heating in the runner dehumidifier not only reduces the energy consumption, but also makes the whole system simpler and the operation cost is lower.

The latest update of COVID-19: According to the website of the Yunnan Provincial Health Commission, three new local confirmed cases (2 Chinese and 1 Burmese) were reported in Yunnan province from 00:00 to 24:00 on July 4. Five new confirmed cases were imported from abroad (3 cases imported from Myanmar and 2 cases imported from Indonesia), and one new asymptomatic infected person imported from Indonesia (imported from Indonesia), all Chinese nationals. Two confirmed cases were cured and discharged from hospital (imported from abroad). In the case of imported cases every day, all provinces should take effective epidemic prevention and control measures to prevent the large-scale counterattack of the COVID-19 virus. Roner dehumidifier, as the temperature and humidity control equipment in the production of vaccine production and detection reagent, so runner dehumidifier manufacturers should continue to further develop and experiment on product stability and energy saving technology of runner dehumidifier.

In order to meet the steam system required for runner regeneration cycle heating, 140℃ steam of 0.6MPa is supplied, and the 12℃ / 18℃ medium temperature cold water system and 6℃ / 13℃ low temperature cold water system are supplied to the dehumidifier cooling dehumidification and cooling use after runner regeneration. Air filtered into the air conditioning unit, first through the pretreatment module, part of the moisture in the air after the fresh air table cooling treatment, after cooling dehumidification, achieve certain temperature and humidity requirements, then through the former wheel dehumidification to achieve dew point design requirements, after the table cooling dehumidification treatment to meet the design temperature requirements, by the processing fan to the later dehumidification wheel. The treated air becomes dry air after the dehumidification wheel. The dry air at the outlet adjusts the temperature to 15℃ ~25℃ after the surface cooling, and passes     through the medium effect filtration, and is sent to the drying room. The dry air flow at the ultra-low dew point circulates the whole room through the workshop airflow organization system. The debugging of the whole dehumidification purification system, one is to meet the normal work of the dehumidifier, the other is the workshop wind system debugging. There are three systems to meet the workshop environmental temperature and humidity requirements: steam regeneration heating system; front surface cooling and chilled water system; workshop ventilation system. The normal operation of these three systems can ensure that the workshop environment is within the normal range, which is also the three important indicators of the perfect operation of the rotor dehumidifier system.

Lithium battery in the production process of the air temperature (℃), humidity (RH), cleanliness requirements are very strict, 23 ± 3℃ is the appropriate temperature, the relative humidity is different according to the product and the manufacturer, <35%, <15%, <5% of several, in the glove box and the dew point temperature requirements, generally have two kinds, respectively-45℃ and 60℃, cleanliness requirements for 100000 level. Anyway, maintaining a low moisture content, appropriate temperature, high cleanliness is the requirements of a lithium battery workshop standard.

Temperature, humidity, cleanliness and other requirements, all need to use the runner dehumidifier to achieve. According to the functions, the rotor dehumidification unit can be divided into NMP recovery system, dehumidification system, filtration system, refrigeration system, water system, etc. Today, we will say one by one.

NMP recovery system, common frozen and wheel recovery system.

Frozen recovery type, using cooling water and chilled water coil to condense NMP from the air, and then collect it through purification. After the exhaust gas is concentrated to a certain concentration, NMP can be recycled by freezing method.

wheel recovery type, VOC wheel using Sweden Proflute molecular sieve wheel, the wheel is divided into three areas, one is the processing area, a cooling area, one is stripping area, VOC wheel slow rotation in the process of work, containing organic solvent to treat gas from the processing area into relatively clean gas, the content of organic solvent can be reduced to 50ppm. The other part of the air containing organic solvent flows through the cooling area under the action of the regeneration fan, and is then heated to a certain temperature, and flows through the runner regeneration area. As the runner regeneration area is heated by the regenerated air, the organic solvent adsorbed in the regeneration area evaporates and takes away with the recycled air. When the wheel works, the ratio of reclaimed air to treated air is 1 / 5 (5 times the concentration), and the concentration of organic solvent in the reclaimed air can be 5 times the concentration before treatment.

The energy consumption of frozen recovery is relatively low, and the rotary energy consumption is high, but it is relatively environmentally friendly, and the waste gas can be directly discharged into the atmosphere after treatment.

Dehumidifier system, generally, freezing dehumidifier + runner dehumidifier is used for double dehumidification. First, the fresh air or fresh air primary return air mixed air is used for crude effect dehumidification, and then the relatively dry air is deeply dehumidification through the runner, so as to achieve the low wet demand of lithium battery production process.

Filter system, generally using G4 primary plate filter + F8 medium effect bag filter, dust and filter the air. The Refrigeration system is divided into frozen water type and direct expansion type. In the lithium battery industry, 90% of the runner dehumidification units use frozen water type, using the refrigeration host to make 7℃ and below frozen water, as a cold source.

High precision constant temperature and humidity air conditioning, mostly used in climate room, plant room, laboratory, three coordinate room, national laboratory, measurement institute and other laboratories with high stability requirements for temperature and humidity, therefore, the industry is also used to call it laboratory air conditioning.

A complete set of high precision constant temperature and humidity air conditioning system, in fact, including constant temperature and humidity air conditioning unit, air flow organization, envelope insulation sealing and other three aspects. Let's mainly talk about the equipment level first today. Steady temperature and humidity air conditioning can meet the requirements of high standards, in addition to the control logic, but also rely on hardware support, such as:

choose a high sensitivity temperature and humidity sensor;

cold air ratio matching reasonable (specific for the wind volume small enthalpy difference design, but can not blindly pursue the wind volume, which will make the unit lose a large degree of dehumidification capacity);

use the electronic expansion valve and differential pressure controller and a series of refrigeration components and soon.

Just now we talked about the control logic of high precision constant temperature and humidity air conditioning, there are three main uses in the market:

Adopt multi-stage refrigeration, multi-stage heating, PID humidification;

VRV system: using electronic expansion valve + frequency conversion vortex compressor. The adjustment quality of this continuous control mode is far better than that of the intermittent control based on the solenoid valve switch.

analog volume water valve + frozen water system: through to the control of the opening of the water valve, easy to achieve 0% to 100% refrigeration capacity stepless adjustment.

How Big Of A Solar System Do I Need To Run An Air Conditioner?

To power an air conditioner using solar energy, you'll need at least 9,200W solar panels. This will require a solar system with a capacity of 15,000 BTUs. So, if you're looking to install solar air conditioners in your home, you'll need to account for the size of your solar panel and your air conditioner.

Which Is Better: Portable Or Stationary Type Of Solar Air Conditioning Units?

Those looking for continuous solar air conditioning units should consider purchasing stationary solar air conditioners. Stationary solar air conditioners are designed to power an air conditioner continuously regardless of the weather. In contrast, portable solar air conditioners only run for six to eight hours on a single charge.

Solar thermal air conditioners can also be built into a property or strategically placed to cool a specific area. Whole-home solar power and air conditioning systems use an array of photovoltaic (PV) solar panels to generate electricity for air conditioning and other appliances.

Which Is Better: DIY Or Commercial Solar Air Conditioners?

There is no clear-cut answer regarding which solar air conditioner is better - DIY or commercial. Ultimately, the decision comes down to a personal preference and what you are willing to invest in time and energy.

DIY solar air conditioners may require more maintenance than commercial units. This includes regular inspections, checking pipes and fans, and changing filters.

Commercial solar air conditioners are more efficient and can save energy in the long run. This is because they use inverters and controllers that help them to optimize their performance according to weather conditions.

While both types of solar air conditioners have their benefits and drawbacks, the best decision for you likely depends on your specific needs and preferences.

If you're curious about solar air conditioning but don't know where to start, consider investing in a DIY unit instead of a commercial one.

How Many AC Can Run In A 3kW Solar System?

It depends on the solar panel you are using and the wattage of the solar panel. For example, a solar panel rated at 3kW can power a total of 1 AC unit and other appliances simultaneously.

When it comes to air conditioning your home, the solar air conditioner is undoubtedly the best option. It's cost-efficient, environment-friendly, and easy to install. Besides, solar air conditioner doesn't require electricity or refrigerant and can be used anywhere- even without solar energy.

So, if you're looking for the best solar air conditioner, choose confidently. Remember that everyone has different requirements when it comes to air conditioning.

Pros

Solar ac units offer environmental benefits, such as reducing grid demand and load shifting during peak usage. Plus, solar air conditioning units reduce energy costs and can help lower greenhouse gas emissions.

Air conditioning units that cool your home with solar power can save money and help the environment. They are cost-effectiveand energy-efficient cooling solutions that can help reduce your household's energy consumption.

The cooling effect of air conditioning is essential for living a comfortable life, so solar air conditioning units are a great way to save money while cooling your home.

Cons

Solar air conditioners can be more expensive than traditional ones due to the additional components needed. This could make them a prohibitively expensive choice for some people.

These conditioners require regular maintenance to ensure they operate at their best. This could include cleaning the mini solar panels and checking electrical connections.

Industrial air conditioning manufacturers

Screw chillers, direct expansion units, and various split air conditioners cover various industries

Industrial, explosion-proof, anti-corrosion

Welcome to consult, support customization

Keeping The Solar Panel Clean

To keep solar panelsclean and functioning optimally, it is important to ensure they are free from dust, dirt, and other debris. Regularly rinsing your solar panels with a garden hose can help to keep them clean and dust-free.

In addition, covering solar panels during prolonged rain or snow can help protect them from accumulating dirt. A professional cleaning service can also be hired to maintain your solar panel system. This will help ensure your solar panel system remains in good working condition.

Storing The Air Conditioner Properly

A solar air conditioner requires solar panels, batteries, and an inverter to store energy when there is insufficient sunlight. These air conditioners operate off-grid and use solar power for energy.

As a result, they can use solar power and storage for uninterrupted operation. DC48V solar air conditioners have hybrid systems that switch to grid power during the day and use a battery to store energy generated during the day.

In addition, a grid connection can be added to allow operation at night and provide higher capacity.

Avoiding Overcharging

Overcharging solar air conditioners can be dangerous and cause the air conditioner to fail prematurely. Solar air conditioners require solar energy to charge their batteries when the sun is shining to avoid overcharging.

Additionally, you should use a solar air conditioner that does not require an inverter, grid connection, or charge controller, as these components can lead to unnecessary energy losses.

Using a hybrid solar air conditioner system that combines  photovoltaic (PV) technology  with  direct current (DC),  cooling can ensure efficient energy usage and avoid overcharging your air conditioner.

Regular Maintenance And Cleaning

Regular cleaning of solar air conditioners is essential for optimal performance. Routine cleaning of solar air conditioners involves removing dust, dirt, and other debris from the unit's refrigerant cooling panel and air conditioning panel.

Choosing The Right Location

Solar air conditioners are solar energy devices that help reduce cooling and heating costs by cooling or heating air without electricity.

These air conditioning systems should be strategically placed to cool a specific area of an interior, such as an open office space or bedroom.

An off-grid solar air conditioner uses a battery to store energy created during the day, allowing it to operate at night when grid power is unavailable.

Mounting The Solar Panel

With solar panels mounted on the roof of your building, solar air conditioner systems can capture the sun's energy and run efficiently.

It is important to consider the solar panel type when choosing a solar air conditioner system that works best for your space and cooling needs.

For example, the ACDC12C solar air conditioner requires no grid connection, batteries, or inverter. This makes it an off-grid air conditioner system that works without power from the grid.

Connecting The Air Conditioner To The Solar Panel

Solar air conditioner panels can be installed on the roof of a building or an outdoor panel. Solar cooling systems use solar panel cooling systems to cool air using direct heat from the sun.

A solar inverter is required to convert direct current (DC) energy from solar panels into usable home solar electricity to operate an air conditioner with solar power.

Connecting the solar thermal panel to the air conditioner's condenser unit allows the sun's power to drive the refrigerant in the AC unit.

Testing The Air Conditioner

Before installing a solar air conditioner, testing the existing air conditioning system to ensure it is functioning properly is important. This is especially important if the solar air conditioner is installed to replace an existing unit.

Make sure that the thermostat is set to the appropriate temperature and that it is working correctly. Dirty air filters can restrict airflow and reduce the air conditioning system's efficiency.

Make sure that the filters are clean and in good condition. Check the electrical connections to ensure that they are tight and secure.

Securing The Air Conditioner

To power solar air conditioning, solar air conditioners require solar thermal panels for solar energy to activate refrigerant in the unit. The solar air conditioner can only function if it is connected to a grid and if the grid connection allows it to run during off-peak hours at a higher capacity.

In some instances, hybrid solar air conditioners are used that can switch between direct current (DC) and alternating current (AC) modes when sunlight is insufficient. These air conditioners can provide cooling from both solar panels and grid power.

If you want to save energy and money using solar air conditioning, consider a few things when choosing a solar air conditioner.

Size And Capacity

The ACDC12C solar ac electricity has a 12,000-watt BTU capacity, which can heat and cool between 500 and 600 sq. Ft. The air conditioner can heat or cool up to 750 Sq. Ft (69 m2).

It is a self-cooling air conditioner that requires no grid connection. This air conditioner operates on 100% solar power and does not require batteries, an inverter, or a charge controller. It also works on grid power when the best solar conditions are unavailable.

However, it is recommended to use an optional grid-power connection for optimal operation at full speed on cloudy days or nighttime use.

Energy Efficiency

When looking for the best solar air conditioner, it is important to consider the type of solar air conditioner you need, such as a hybrid, DC, or AC power system.

The solar-powered air conditioner should be energy-efficient and environmentally friendly to reduce your electricity bill and lower carbon emissions. Evaluate the type of solar PV panels and batteries needed for a solar photovoltaic air conditioner in the United States.

Additionally, understand the differences between solar air and solar-powered air conditioners. Finally, consider the energy efficiency of a solar air conditioner when selecting one for your home.

Price And Brand Reputation

Solar air conditioners are a cost-effective cooling and heating solution that can save energy costs of up to 100% of cooling or heating costs. They operate by absorbing heat from solar energy during the day and releasing heat pumps at night when solar energy isn't available.

These air conditioner systems require power from an electricity grid power source with a mini-split to operate continuously. They are available in various BTU ratings, from 12,000 BTU to 600 sqft. They are also suitable for both residential and commercial cooling applications.

Additional Features

Solar air conditioners use solar panels to power refrigerant in an air conditioning unit. These air conditioners are configured to work with a grid connection, allowing them to operateautomatically when the sun's rays are not shining or when electricity rates are lowest.

Homeowners also require a solar thermal panel to activate the refrigerant in the cooling unit.

In addition, hybrid solar air conditioner units can function as solar air conditioners and air conditioning units using a vacuum pump, making them more energy-efficient and cost-effective than other solar air conditioner options.

Compatibility With Solar

A solar air conditioner is a device that can help reduce energy bills and reduce greenhouse gas emissions by cooling a building during the day and heating it at night.

Solar air conditioners are energy efficient as they capture solar energy during the day and power an air conditioner system at night.

However, solar air conditioners are only sometimes compatible with solar power, especially when several solar panels face direct sunlight.

The cost of solar thermal systems can vary depending on various factors, such as the size of the unit, the quality of materials used, and the complexity of the installation process.

The various types of solar air conditioners are:

Split Solar Air Conditioners

Split solar air conditioners are air conditioning system that uses solar energy to power the compressor and the cooling process. They consist of two main components - an indoor unit and an outdoor unit.

The indoor unit is installed inside the room, while the outdoor unit is installed outside, usually on the roof or a balcony. The outdoor unit of a split solar air conditioner contains a solar panel that converts solar energy into electricity to power the compressor.

The compressor compresses the refrigerant gas and circulates it through the indoor unit, which blows cool air into the room.

Portable Solar Air Conditioners

A portable solar air conditioner from Amazon is popular for outdoor cooling and heating. Their compact design makes them ideal for installation in spaces with limited cooling or heating capacity, such as balconies, decks, and verandas.

If you're looking for a reputable retailer to buy a solar air conditioner, you've found it. A solar air conditioner is a fantastic investment if you care about the environment or want to save money on cooling expenditures.

But, before making a purchase, there are a few things to remember. Here, you'll find all the information you need to choose between a solar air conditioner and a conventional one.

Solar air conditioners are solar-powered airconditioners designed to efficiently and effectively provide cooling to a room. Solar air conditioners use solar panels to power the air conditioner, and solar hotspot energy gives much power to the air conditioner's condenser and refrigerant.